Ga Air titẹ DTH Hammers
A nfun IR hammer,DHD3.5, DHD340a, DHD360, DHD380, COPatiòòlù QL.Iwọn iho to dara julọ fun liluho bugbamu pẹlu DTH jẹ 90mm si 254 mm, awọn ihò bugbamu ti o kere julọ ni a gbẹ ni gbogbogbo nipa lilo òòlù oke, ati awọn ihò nla ni gbogbogbo lo awọn ẹrọ iyipo.Hammer wa bi COP ati QL ni a mọ fun igbẹkẹle wọn ati igbesi aye gigun.
Nitori ọrọ-aje ati agbara liluho ti o lagbara, isalẹ iho iho di ohun elo liluho to ti ni ilọsiwaju fun liluho ati awọn ile-iṣẹ iwakusa.Isalẹ awọn òòlù iho ati awọn iho lilu jẹ apẹrẹ papọ lati ṣiṣẹ ni iṣọkan pipe, fifun awọn oṣuwọn ilaluja giga, igbesi aye iṣẹ pipẹ ati awọn idiyele kekere.
1. Pese agbara ti o pọju si bit liluho, iyara liluho ni iyara ati agbara afẹfẹ kekere nitori eto inu pataki ti HD jara DTH hammer ti a ṣe ni ibamu si imọran lilu apata tuntun.
2. Iṣe aladun ati igbesi aye iṣẹ pipẹ ti HD jara DTH hammer nitori awọn ohun elo irin alloy didara ti o ga ati imọ-ẹrọ processing ilọsiwaju ti a ṣe atunṣe.
3. Oṣuwọn iṣoro kekere ati rọrun si itọju nitori rọrun, igbẹkẹle ati irọrun apejọ ati ṣajọpọ eto inu ti ju.
4. Rọrun lati lọ kuro ni òòlù nitori multihead o tẹle pọ Chuck ati silinda ti ju.
5. Interchangeable pẹlu DTH bit ati lu paipu
Iwọn kekere ati awọn òòlù ti o ga julọ wa ni ile-iṣẹ wa.
· Dara fun awọn rigs liluho giga
· Liluho daradara omi
· Igbasilẹ fifọ ilaluja
· ibujoko liluho
· Ṣiṣayẹwo Awọn ohun elo Imọ-ẹrọ Ilu
· Asuwon ti iye owo fun ẹsẹ ti gbẹ iho
· Iwakusa / Iwakiri nkan ti o wa ni erupe ile
· Simple & logan oniru
· Ṣiṣayẹwo Awọn ohun elo Imọ-ẹrọ Ilu
· Liluho daradara Epo
· Àtọwọdá ẹsẹ ko beere ni bit
· Gigun awọn ẹya ara aye
· O pọju ṣiṣe
· Ṣe idagbasoke agbara nla fun eyikeyi awọn agbara konpireso
· Wo inu 15% si 30% yiyara
· Pese afikun iṣelọpọ ni idiyele ẹyọkan kekere
(1) Iwọn: 90mm-605mm
(2)DTH Hammer: 3"-12"
(3) Package: ni onigi nla
(4) Iṣelọpọ: 2000pcs / osù
| DHT 3.5 | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 4.4 kg | 9 | Ita Silinda | 9.5 kg |
| 2 | "O" Oruka | 0.01 kg | 10 | Duro Oruka | 0.1 kg |
| 3 | Ṣayẹwo àtọwọdá | 0.2 kg | 11 | Eyin Oruka of Top iha | 0.01 kg |
| 4 | Orisun omi | 0.02 kg | 12 | Wakọ Chuck | 2.1 kg |
| 5 | Idamu funmorawon | 0.02 kg | 13 | Lu Bit | |
| 6 | Air Pinpin | 1.4 kg | |||
| 7 | Silinda ti inu | 1.7 kg | |||
| 8 | Pisitini | 5.6 kg | |||
| DTH3.5 Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 928mm | 25Kg | Φ82mm | API2 3/8 ″ REG | DHD3.5 | Φ90-Φ110mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.5Mpa | ||||
| 1.0-1.7 Mpa | 30-60 r / min | 4.5m³/ iseju | 8.5m³/ iseju | ||
| M30-DTH òòlù | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 4.5 kg | 9 | Sleeve itọsọna | 0.9 kg |
| 2 | "O" Oruka | 0.01 kg | 10 | Oruka idaduro | 0,2 kg |
| 3 | Ṣayẹwo àtọwọdá | 0.13 kg | 11 | "O" Oruka | 0.01 kg |
| 4 | Orisun omi | 0.02 kg | 12 | Wakọ Chuck | 2,5 kg |
| 5 | àtọwọdá Ijoko | 0,76 kg | 13 | Lu Bit | |
| 6 | Silinda ti inu | 1,45 kg | |||
| 7 | Pisitini | 4.8 kg | |||
| 8 | Pisitini Case | 7.6 kg | |||
| M30 Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 931mmmm | 23Kg | Φ82mm | API2 3/8 ″ REG | M30 | Φ90-Φ115mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.5Mpa | ||||
| 1.0-1.7Mpa | 30-50 r / min | 4m³/ iseju | 6.5m³/ iseju | ||
| DHT340-DTH Hammer | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 8.8 kg | 9 | Ita Silinda | 15.9 kg |
| 2 | "O" Oruka | 0.01 kg | 10 | Duro Oruka | 0.2 kg |
| 3 | Ṣayẹwo àtọwọdá | 0,46 kg | 11 | "O" Oruka | 0.01 kg |
| 4 | Orisun omi | 0.04 kg | 12 | Wakọ Chuck | 3.7 kg |
| 5 | Idamu funmorawon | 0.2 kg | 13 | Lu Bit | |
| 6 | Air Pinpin | 2.1 kg | |||
| 7 | Silinda ti abẹnu | 2,45 kg | |||
| 8 | Pisitini | 9 kg | |||
| DTH 340 Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1032mm | 43Kg | Φ99mm | API2 3/8 ″ REG | DHD340 | Φ110-Φ135mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.5Mpa | ||||
| 1.0-2.2Mpa | 30-60 r / min | 5.53m³/ iseju | 10m³/ iseju | ||
| QL40-DTH Hammer | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 8.8 kg | 9 | Pisitini Case | 16.5 kg |
| 2 | "O" Oruka | 0.01 kg | 10 | Sleeve itọsọna | 0.9 kg |
| 3 | Ṣayẹwo àtọwọdá | 0,46 kg | 11 | Oruka idaduro | 0.2 kg |
| 4 | Orisun omi | 0.04 kg | 12 | "O" Oruka | 0.01 kg |
| 5 | roba Buffer | 0.2 kg | 13 | Wakọ Chuc | 3.3 kg |
| 6 | Àtọwọdá Òkun | 2.1 kg | 14 | Lu Bit | |
| 7 | Silinda ti inu | 2,45 kg | |||
| 8 | Pisitini | 8.8 kg | |||
| Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1102mm | 43.7Kg | Φ99mm | API2 3/8 ″ REG | QL40 | Φ110-Φ135mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.2Mpa | 30-60 r / min | 5.5m³/ iseju | 10m³/ iseju | ||
| M40-DTH Hammer | |||||
 | |||||
| Ref. | 部件 Awọn ẹya | 单重 iwuwo | Ref. | 部件 Awọn ẹya | 单重 iwuwo |
| 1 | Top Sub | 8.1 kg | 9 | Sleeve Itọsọna | 1,84 kg |
| 2 | O形圈 “O” Oruka | 0.01 kg | 10 | 卡环 Oruka Idaduro | 0.3 kg |
| 3 | 逆止阀 Ṣayẹwo àtọwọdá | 0.3 kg | 11 | O形圈 “O” Oruka | 0.01 kg |
| 4 | 弹簧 Orisun omi | 0.04 kg | 12 | 卡钎套 Wakọ Chuck | 3.9 kg |
| 5 | 配气座 Àtọwọdá Ijoko | 1.5 kg | 13 | 钻头 Drill Bit | |
| 6 | 内缸 Silinda inu | 2.1 kg | |||
| 7 | Piston | 8.4 kg | |||
| 8 | 外缸 Pisitini Case | 15 kg | |||
| M40 Imọ sile | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1004mmmm | 40.5Kg | Φ99mm | API2 3/8 ″ REG | M40 | Φ110-Φ135mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.5Mpa | ||||
| 1.0-2.2Mpa | 30-60 r / min | 5m³/ iseju | 9m³/ iseju | ||
| DHT350-DTH Hammer | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 14.7 kg | 9 | Silinde inu | 4.9 kg |
| 2 | "O" Oruka | 0.02 kg | 10 | Pisitini | 15.5 kg |
| 3 | Ṣayẹwo àtọwọdá | 1 kg | 11 | Pisitini Case | 30.3 kg |
| 4 | Orisun omi | 0.06 kg | 12 | Retainer Ringk | 0.3 kg |
| 5 | fiofinsi oruka | 0.1 kg | 13 | "O" Oruka | 0.01 kg |
| 6 | roba Buffer | 0.06 kg | 14 | Wakọ Chuck | 7.1 kg |
| 7 | ẹlẹsẹ-ẹsẹ | 0.2 kg | 15 | Lu Bit | |
| 8 | Àtọwọdá Òkun | 4.2 kg | |||
| DHT 350 Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1209mm | 78.5Kg | Φ125mm | API2 3/8 ″ REG | DHD350 | Φ135-Φ155mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.5Mpa | 30-60 r / min | 9m³/ iseju | 15m³/ iseju | ||
| QL50-DTH Hammer | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 14.7 kg | 9 | Pisitini Case | 24.7 kg |
| 2 | "O" Oruka | 0.02 kg | 10 | Sleeve itọsọna | 1 kg |
| 3 | Ṣayẹwo àtọwọdá | 1 kg | 11 | Oruka idaduro | 0.6 kg |
| 4 | Orisun omi | 0.06 kg | 12 | "O" Oruka | 0.01 kg |
| 5 | roba Buffer | 0.2 kg | 13 | Wakọ Chuc | 5.6 kg |
| 6 | Àtọwọdá Òkun | 4.1 kg | 14 | Lu Bit | |
| 7 | Silinda ti inu | 4.4 kg | |||
| 8 | Pisitini | 17 kg | |||
| QL50 Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1154mm | 73.5Kg | Φ126mm | API2 3/8 ″ REG | QL50 | Φ135-Φ155mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.5Mpa | 30-60 r / min | 9m³/ iseju | 15m³/ iseju | ||
| M50-DTH Hammer | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 13.7 kg | 9 | Sleeve itọsọna | 2.6 kg |
| 2 | "O" Oruka | 0.02 kg | 10 | Oruka idaduro | 0.7 kg |
| 3 | Ṣayẹwo àtọwọdá | 0.7 kg | 11 | "O" Oruka | 0.01 kg |
| 4 | Orisun omi | 0.1 kg | 12 | Wakọ Chuck | 7.1 kg |
| 5 | àtọwọdá Ijoko | 2 kg | 13 | Lu Bit | |
| 6 | Silinda ti inu | 2.8 kg | |||
| 7 | Pisitini | 15 kg | |||
| 8 | Pisitini Case | 24 kg | |||
| Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1122mmmm | 70.5Kg | Φ126mm | API2 3/8 ″ REG | M50 | Φ136-Φ155mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.5Mpa | 30-60 r / min | 7m³/ iseju | 13m³/ iseju | ||
| DHT 360-DTH Hammer | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 20.3 kg | 9 | Pisitini Case | 37.2 kg |
| 2 | "O" Oruka | 0.02 kg | 10 | Sleeve itọsọna | 2.5 kg |
| 3 | Ṣayẹwo àtọwọdá | 0.8 kg | 11 | Oruka idaduro | 0.6 kg |
| 4 | Orisun omi | 0.05 kg | 12 | "O" Oruka | 0.02 kg |
| 5 | roba Buffer | 0.3 kg | 13 | Wakọ Chuck | 6 kg |
| 6 | Àtọwọdá Òkun | 5 kg | 14 | Lu Bit | |
| 7 | Silinda ti inu | 4 kg | |||
| 8 | Pisitini | 23.5 kg | |||
| DHD360 Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1063mm | 100.5Kg | Φ142mm | API3 1/2 ″ REG | DHD360 | Φ150-Φ190mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.5Mpa | 30-60 r / min | 9m³/ iseju | 20m³/ iseju | ||
| QL60-DTH Hammer | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 23 kg | 9 | Pisitini Case | 39 kg |
| 2 | "O" Oruka | 0.02 kg | 10 | Sleeve itọsọna | 1.1 kg |
| 3 | Ṣayẹwo àtọwọdá | 0.08 kg | 11 | Oruka idaduro | 0.6 kg |
| 4 | Orisun omi | 0.05 kg | 12 | "O" Oruka | 0.02 kg |
| 5 | roba Buffer | 0.3 kg | 13 | Wakọ Chuck | 6.3 kg |
| 6 | Àtọwọdá Òkun | 6.2 kg | 14 | Lu Bit | |
| 7 | Silinda ti inu | 5 kg | |||
| 8 | Pisitini | 23.5 kg | |||
| QL60 Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1211mm | 100.5Kg | Φ126mm | API3 1/2 ″ REG | QL60 | Φ158-Φ190mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.5Mpa | 30-60 r / min | 9m³/ iseju | 20m³/ iseju | ||
| M60-DTH Hammer | |||||
 | |||||
| Ref. | Awọn ẹya | 单重 iwuwo | Ref. | 部件 Awọn ẹya | 单重 iwuwo |
| 1 | Oke Sub | 20 kg | 9 | Sleeve itọsọna | 4,8 kg |
| 2 | "O" Oruka | 0.01 kg | 10 | "O" Oruka | 0.01 kg |
| 3 | Ṣayẹwo àtọwọdá | 0.56 kg | 11 | Oruka idaduro | 0.9 kg |
| 4 | Orisun omi | 0.06 kg | 12 | "O" Oruka | 0.01 kg |
| 5 | àtọwọdá Ijoko | 3,5 kg | 13 | Wakọ Chuck | 5,8 kg |
| 6 | Silinda ti inu | 3.9 kg | 14 | Lu Bit | |
| 7 | Pisitini | 21,5 kg | |||
| 8 | Pisitini Case | 30,5 kg | |||
| M60 Imọ sile | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1129mmmm | 91.5Kg | Φ144mm | API3 1/2 ″ REG | M60 | Φ152-Φ203mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.8Mpa | 30-60 r / min | 8m³/ iseju | 17m³/ iseju | ||
| DHT 380-DTH Hammer | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 42 kg | 9 | Pisitini | 41,5 kg |
| 2 | Atunṣe Shim | 0.2 kg | 10 | Pisitini Case | 62.5 kg |
| 3 | "O" Oruka | 0.02 kg | 11 | Oruka idaduro | 1.2 kg |
| 4 | Ṣayẹwo àtọwọdá | 1.3 kg | 12 | "O" Oruka | 0.02 kg |
| 5 | Orisun omi | 0.09 kg | 13 | Atunṣe Shim | 0.2 kg |
| 6 | roba Buffer | 0.4 kg | 14 | Wakọ Chuck | 18.2 kg |
| 7 | Àtọwọdá Òkun | 13 kg | 15 | Lu Bit | |
| 8 | Silinda ti inu | 9.1 kg | |||
| DHD380 Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1492mm | 190Kg | Φ180mm | API4 1/2 ″ REG | DHD380 | Φ195-Φ254mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.8Mpa | 2.4Mpa | ||||
| 1.5-3.3Mpa | 30-60 r / min | 26m³/ iseju | 34m³/ iseju | ||
| QL80-DTH Hammer | |||||
 | |||||
| Ref. | Awọn ẹya | Iwọn | Ref. | Awọn ẹya | Iwọn |
| 1 | Oke Sub | 42 kg | 9 | Pisitini | 41 kg |
| 2 | Atunṣe Shim | 0.2 kg | 10 | Pisitini Case | 64 kg |
| 3 | "O" Oruka | 0.02 kg | 11 | Sleeve itọsọna | 2.9 kg |
| 4 | Ṣayẹwo àtọwọdá | 1.3 kg | 12 | Oruka idaduro | 1.2 kg |
| 5 | Orisun omi | 0.1 kg | 13 | "O" Oruka | 0.02 kg |
| 6 | roba Buffer | 0.4 kg | 14 | Atunṣe Shim | 0.2 kg |
| 7 | Àtọwọdá Òkun | 12.7 kg | 15 | Wakọ Chuck | 12 kg |
| 8 | Silinda ti inu | 9.1 kg | 16 | Lu Bit | |
| QL80 Imọ paramita | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1471mm | 187Kg | Φ180mm | API4 1/2 ″ REG | QL80 | Φ195-Φ254mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.8Mpa | 2.4Mpa | ||||
| 1.5-3.3Mpa | 30-60 r / min | 26m³/ iseju | 34m³/ iseju | ||
| M80-DTH Hammer | |||||
 | |||||
| Ref. | 部件 Awọn ẹya | 单重 iwuwo | Ref. | 部件 Awọn ẹya | 单重 iwuwo |
| 1 | Top Sub | 43 kg | 10 | 尼龙塞 Ọra Plug | 0.04 kg |
| 2 | O形圈 “O” Oruka | 0.01 kg | 11 | Piston | 42 kg |
| 3 | 逆止阀 Ṣayẹwo àtọwọdá | 0,46 kg | 12 | 外缸 Pisitini Case | 43 kg |
| 4 | 弹簧 Orisun omi | 0.07 kg | 13 | Sleeve Itọsọna | 9.8 kg |
| 5 | 阀座 Àtọwọdá Ijoko | 0.65 kg | 14 | 挡圈 Ṣayẹwo Iwọn | 0.09 kg |
| 6 | O形圈 “O” Oruka | 0.01 kg | 15 | 卡环 Oruka Idaduro | 1.9 kg |
| 7 | 插销 Bole | 0.3 kg | 16 | O形圈 “O” Oruka | 0.01 kg |
| 8 | O形圈 “O” Oruka | 0.01 kg | 17 | 卡钎套 Wakọ Chuck | 17 kg |
| 9 | 配气杆 kosemi àtọwọdá | 2 kg | 18 | 钻头 Drill Bit | |
| M80 Imọ sile | |||||
| Gigun (Laisi Bit) | Iwọn | Ita opin | Asopọmọra Okun | Bit Shank | Iho Range |
| 1333mmmm | 160.5Kg | Φ180mm | API4 1/2 ″ REG | M80 | Φ195-Φ245mm |
| Ṣiṣẹ titẹ | Iyara yiyipo ti a ṣe iṣeduro | Agbara afẹfẹ | |||
| 1.8Mpa | 2.4Mpa | ||||
| 1.5-3.3Mpa | 30-60 r / min | 26m³/ iseju | 35m³/ iseju | ||
