Awọn iwọn DTH

DTH Bits Ifihan Aworan
  • Awọn iwọn DTH
  • Awọn iwọn DTH
  • Awọn iwọn DTH
  • Awọn iwọn DTH
  • Awọn iwọn DTH

Apejuwe kukuru:

Nitori ọrọ-aje ati agbara liluho ti o lagbara, isalẹ iho iho di ohun elo liluho to ti ni ilọsiwaju fun liluho ati awọn ile-iṣẹ iwakusa.Isalẹ awọn òòlù iho ati awọn iho lilu jẹ apẹrẹ papọ lati ṣiṣẹ ni iṣọkan pipe, fifun awọn oṣuwọn ilaluja giga, igbesi aye iṣẹ pipẹ ati awọn idiyele kekere.1. Pese agbara ti o pọju si bit liluho, iyara liluho ni iyara ati agbara afẹfẹ kekere nitori eto inu pataki ti HD jara DTH hammer ti a ṣe ni ibamu si imọran lilu apata tuntun.2. Dan...


  • 3″&4″ DTH Bits:HD3.5,M30;DHD340,SD4,QL40,M40
  • 5"&6"DTH Bits:DHD350,SD5,QL50,M50,DHD360;SD6,QL60,M60,
  • 8 ″ DTH Bits,:DHD380,SD8,QL80,M80,
  • Iwọn afẹfẹ kekere DTHBits:CIR80,CIR90
    • Ṣe igbasilẹ bi PDF

    Alaye ọja

    3"(DHD3.5,M30)

    4"(DHD340, SD4,QL40,M40)

    5"(DHD350, SD5,QL50,M50)

    6"(DHD360, SD6,QL60,M60)

    8"(DHD380,SD8,QL80,M80)

    Misson(M16,M60,SD6)

    ọja Tags

    Nitori ọrọ-aje ati agbara liluho ti o lagbara, isalẹ iho iho di ohun elo liluho to ti ni ilọsiwaju fun liluho ati awọn ile-iṣẹ iwakusa.Isalẹ awọn òòlù iho ati awọn iho lilu jẹ apẹrẹ papọ lati ṣiṣẹ ni iṣọkan pipe, fifun awọn oṣuwọn ilaluja giga, igbesi aye iṣẹ pipẹ ati awọn idiyele kekere.
    1. Pese agbara ti o pọju si bit liluho, iyara liluho ni iyara ati agbara afẹfẹ kekere nitori eto inu pataki ti HD jara DTH hammer ti a ṣe ni ibamu si imọran lilu apata tuntun.
    2. Iṣe aladun ati igbesi aye iṣẹ pipẹ ti HD jara DTH hammer nitori awọn ohun elo irin alloy didara ti o ga ati imọ-ẹrọ processing ilọsiwaju ti a ṣe atunṣe.
    3. Oṣuwọn iṣoro kekere ati rọrun si itọju nitori rọrun, igbẹkẹle ati irọrun apejọ ati ṣajọpọ eto inu ti ju.
    4. Rọrun lati lọ kuro ni òòlù nitori multihead o tẹle pọ Chuck ati silinda ti ju.
    5. Interchangeable pẹlu DTH bit ati lu paipu
    Iwọn kekere ati awọn òòlù ti o ga julọ wa ni ile-iṣẹ wa.
    · Dara fun awọn rigs liluho giga
    · Liluho daradara omi
    · Igbasilẹ fifọ ilaluja
    · ibujoko liluho
    · Ṣiṣayẹwo Awọn ohun elo Imọ-ẹrọ Ilu
    · Asuwon ti iye owo fun ẹsẹ ti gbẹ iho
    · Iwakusa / Iwakiri nkan ti o wa ni erupe ile
    · Simple & logan oniru
    · Ṣiṣayẹwo Awọn ohun elo Imọ-ẹrọ Ilu
    · Liluho daradara Epo
    · Àtọwọdá ẹsẹ ko beere ni bit
    · Gigun awọn ẹya ara aye
    · O pọju ṣiṣe
    · Ṣe idagbasoke agbara nla fun eyikeyi awọn agbara konpireso
    · Wo inu 15% si 30% yiyara
    · Pese afikun iṣelọpọ ni idiyele ẹyọkan kekere
    4 ″ DTH Bits,DHD340,SD4,QL40,M40;
    5 ″ DTH Bits,DHD350,SD5,QL50,M50,
    6 ″ DTH die-die,DHD360,SD6,QL60,M60,
    8 ″ DTH Bits,DHD380,SD8,QL80,M80,
    (1) Iwọn: 90mm-605mm
    (2) DTH Hammer: 3"-12"
    (3) Package: ni onigi nla
    (4) Iṣelọpọ: 2000pcs / osù
  • Ti tẹlẹ:
  • Itele:
    • EPIROC KOP 32
    SECOROC 3″
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     olopa32 8 11 6 11 85 3 3/8 ″ 3.7
    8 12 6 12 90 3 1/2 ″ 4.2
    INGERSOLL-RAND DHD 3.5
    EPIROC COP 35 / TD 35.2 / QLX 35 / TERRANOX 3, BULROC HYPER 31 (DHD 3.5 shank), HALCO DART 350 / DOMINATOR 350 & 375 (DHD 3.5 shank), KARBO 35A, SSNUM 35A, SSNUM CONL, MIN. PATRIOT 35 A, PUMA 3.1 (DHD 3.5 shank), SANDVIK RH460 3.5 ″
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     dhd3.5-1 8 11 6 11 85 3 3/8 ″ 4.2
    8 11 8 11 92 3 5/8 ″ 4.5
    8 12 6 12 92 3 5/8 ″ 4.6
    8 12 6 12 95 3 3/4 ″ 4.7
    8 12 7 12 100 3 15/16 ″ 4.95
    8 12 8 12 105 4 1/8 ″ 5.4
     dhd3.5-2 8 14 7 12 105 4 1/8 ″ 5.4
    dhd3.5-3 7 11 6 11 92 3 5/8 ″ 4.72
    7 12 6 12 95 3 3/4 ″ 4.9
    7 12 6 12 100 3 15/16 ″ 5.16
    7 12 6 12 105 4 1/8 ″ 5.3
    INGERSOLL-RAND DHD 3,5 HDHALCO DOMINATOR 375 (MD 35 shank), MINCON Dókítà 35
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     dhd3.5hd-1 8 12 6 12 95 3 3/4 ″ 5.1
    8 12 7 12 100 3 15/16 ″ 5.3
    7 14 6 14 105 4 1/8 ″ 5.8
    8 12 8 12 105 4 1/8 ″ 5.4
     dhd3.5hd-2 8 14 7 12 105 4 1/8 ″ 5.45
     dhd3.5hd-3 7 12 6 12 95 3 3/4 ″ 5.34
    7 12 6 12 100 3 15/16 ″ 5.3
    7 12 7 12 105 4 1/8 ″ 5.4
    EPIROC TD 40 / QLX 40 / COP 44 wura
    MINCON MP40 (TD40 shank), SANDVIK RH460 4 ″
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     td40-1 8 14 7 13 110 4 5/16 ″ 8
    8 13 8 13 115 4 1/2 " 9.3
    8 14 7 13 115 4 1/2 " 9.3
    8 14 8 13 120 4 23/32″ 9.5
    8 14 9 13 125 4 15/16 ″ 9.8
    8 14 10 13 130 * 5 1/8 ″ 10.2
     td40-2 8 14 7 12 110 4 5/16 ″ 9.1
    8 14 8 12 115 4 1/2 " 9.3
    8 16 6 14 115 4 1/2 " 9.3
    8 14 8 12 120 4 23/32″ 9.5
    8 14 10 12 125 4 15/16 ″ 9.8
    8 14 8 14 130 * 5 1/8 ″ 10.2
    8 16 10 14 140 * 5 1/2 ″ 10.9
     td40-3 8 14 8 12 115 4 1/2 " 9.1
    8 14 8 12 115 4 1/2 " 9.1
    8 16 8 12 125 4 15/16 ″ 9.8
    8 16 8 12 125 4 15/16 ″ 9.8
    8 16 8 12 130 * 5 1/8 ″ 10.2
    8 16 8 12 130 * 5 1/8 ″ 10.2
    td40-4 8 13 8 12 115 4 1/2 " 9.1
    INGERSOLL-RAND DHD 340A
    EPIROC COP 44 / DHD 4 / QL 340 / TERRANOX 4, BULROC HYPER 41 (DHD 340A shank), HYPER 415,
    Harco Dart 400 / Super Dominitor 400, 450 (DHD 340A Shank), Controc 8 ", Secuc 4" / 4 ″ Q
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     dhd340a-1 8 14 8 12 105 4 1/8 ″ 7.6
    8 12 8 12 105 4 1/8 ″ 7.5
    8 14 8 12 110 4 5/16 ″ 7.8
    8 12 8 12 110 4 5/16 ″ 7.8
    8 13 8 13 110 4 5/16 ″ 7.8
    8 14 8 12 115 4 1/2 " 8.1
    8 12 9 12 115 4 1/2 " 8.1
    8 13 8 13 115 4 1/2 " 8.1
    7 14 7 14 115 4 1/2 " 8.62
    8 12 9 12 115 4 1/2 " 8.1
    8 14 8 12 120 4 23/32″ 8.1
    8 14 9 14 130 * 5 1/8 ″ 9.3
    8 16 9 14 140 * 5 1/2 ″ 11.1
    8 16 9 14 145 * 5 45/64 ″ 11.6
     dhd340a-2 9 12 12 12 127 * 5″ 8.75
    9 12 12 12 130 * 5 1/8 ″ 9.15
    9 14 12 12 140 * 5 1/2 ″ 10.2
     dhd340a-3 8 14 7 12 105 4 1/8 ″ 7.7
    8 14 8 12 110 4 5/16 ″ 8.15
    8 14 8 12 115 4 1/2 " 8.5
    8 16 6 14 115 4 1/2 " 8.5
    8 14 8 12 120 4 23/32″ 9
    8 14 9 12 127 * 5″ 9.15
    8 14 9 12 130 * 5 1/8 ″ 9.2
    8 16 9 14 140 * 5 1/2 ″ 11.1
    8 16 9 14 145 * 5 45/64 ″ 11.5
    8 16 9 14 150 * 5 7/8 ″ 12
    INGERSOLL-RAND DHD 350R
    EPIROC COP 54 / DHD 5 / TERRANOX 5, BULROC HYPER 51 / 55DH (DHD 350 shank), HALCO SUPER DOMINATOR 500 / 550 HD (DHD 350 shank) MINCON 5 DH / 5 BH (DHDANUM5 CHAKHA), 35050 CHA 5.2 (DHD 350 shank), SECOROC 5″ / 5″ Q
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     hdh350r-1 8 16 6 16 127 5″ 15.85
    8 16 8 16 140 5 1/2 ″ 15.9
    8 16 9 14 146 5 3/4 ″ 16.6
     hdh350r-2 8 16 8 14 130 5 1/8 ″ 14.6
    8 16 7 14 135 5 5/16 ″ 15.7
    8 16 8 14 140 5 1/2 ″ 15.9
    8 16 8 16 145 5 45/64 ″ 16,60
    8 16 8 16 146 5 3/4 ″ 16.6
    8 16 8 16 150 5 7/8 ″ 17.2
    8 16 8 16 152 * 6″ 18
    8 16 10 16 165 * 6 1/2 ″ 18.8
     hdh350r-3 9 16 9 14 135 5 5/16 ″ 16.7
    9 16 9 14 150 5 7/8 ″ 17.2
     hdh350r-4 8 16 8 12 127 5″ 14.5
    8 16 8 12 130 5 1/8 ″ 14.6
    8 16 7 14 135 5 5/16 ″ 15.7
    8 16 8 14 140 5 1/2 ″ 15.9
    8 16 8 16 146 5 3/4 ″ 17.1
    8 16 9 14 150 5 7/8 ″ 16.1
    8 16 9 14 152 * 6″ 17.2
    8 16 9 16 152 * 6″ 17.2
    8 16 9 16 165 * 6 1/2 ″ 18.8
    10 16 12 16 180 * 7″ 25
     hdh350r-5 9 16 9 14 130 5 1/8 ″ 15.1
    9 14 9 14 135 5 5/16 ″ 15.7
    9 16 10 14 150 5 7/8 ″ 16.9
    INGERSOLL-RAND QL5 / QL50
    EPIROC QL 50 / TD 50 / COP 54 GOLD, BULROC HYPER 55 DH, HALCO SUPER DOMINATOR 550 HD QL50, KARBO K50 MINCON MQ50, MP50 / 5 DH-QL, MP56, NUMA PATRIOT 5,5 55 DCS ), SANDVIK RH460 / RH460g 5 ″
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     ql50-1 8 16 6 16 130 5 1/8 ″ 15.8
    8 16 7 16 135 5 5/16 ″ 15.8
    8 16 7 16 140 5 1/2 ″ 16.72
     ql50-2 9 14 9 16 130 5 1/8 ″ 15.8
    9 14 10 14 135 5 5/16 ″ 15.8
    9 14 10 14 140 5 1/2 ″ 16.7
     ql50-3 8 16 8 12 130 5 1/8 ″ 14.55
    8 16 8 14 140 5 1/2 ″ 16.7
    8 16 10 14 140 5 1/2 ″ 16.7
    8 16 8 16 146 5 3/4 ″ 17
    8 16 8 16 152 * 6″ 17.6
    8 16 10 16 165 * 6 1/2 ″ 19.4
     ql50-4 9 16 9 14 135 5 5/16 ″ 16.1
    9 16 9 14 140 5 1/2 ″ 16.7
     ql50-5 8 16 8 12 127 5″ 13.56
    8 16 8 12 130 5 1/8 ″ 14.55
    8 16 6 16 130 5 1/8 ″ 14.8
    8 16 6 16 135 5 5/16 ″ 15
    8 16 8 14 140 5 1/2 ″ 16.5
    8 16 8 16 146 5 3/4 ″ 16.8
    8 16 9 16 152 * 6″ 17.1
    8 16 9 16 165 * 6 1/2 ″ 18.8
    10 16 12 16 180 * 7″ 19.4
     ql50-6 9 16 9 14 130 5 1/8 ″ 15.8
    9 14 9 14 135 5 5/16 ″ 16.1
    9 16 9 14 150 5 7/8 ″ 17.6
    9 16 9 16 152 * 6″ 17.6
    INGERSOLL-RAND DHD 360 / DH6 / SF6 / SF6.5
    EPIROC COP 64 / DHD 6 / TERRANOX 6, BULROC HYPER 61 / 63 / 63 HD / 66 DH (DHD 360 shank), HALCO DOMINATOR 600 (DHD 360 shank) / SUPER DOMINATOR 600 / 6360D shank (DHD), 360,
    NUMA CHALLENGER 6 / PATRIOT 60W, PUMA 6.2 / 6.3 (DHD 360 shank), SECOROC 6 ″ / 6″ Q / 6″ QHD
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     dhd360-1 8 16 8 16 152 6″ 23.9
    8 16 8 16 156 6 1/8 ″ 24.3
    8 16 8 16 159 6 1/4 ″ 24.7
    8 16 10 16 165 6 1/2 ″ 25.2
    10 16 10 16 165 6 1/2 ″ 25.4
    10 16 10 16 172 6 3/4 ″ 25.9
    10 16 12 16 180 * 7″ 25
    10 19 14 16 190 * 7 1/2 ″ 29.8
    10 19 14 16 200 * 7 7/8 ″ 30
    10 19 14 16 203 * 8″ 30.1
     dhd360-2 9 16 10 16 178 * 7″ 25
     dhd360-3 8 16 9 16 152 6″ 23.6
    8 16 9 16 156 6 1/8 ″ 24
    8 16 9 16 159 6 1/4 ″ 24.4
    8 16 9 16 165 6 1/2 ″ 24.8
    10 16 10 16 165 6 1/2 ″ 25
    8 19 9 16 172 6 3/4 ″ 25.6
    10 16 10 16 172 6 3/4 ″ 25.6
    10 19 14 16 190 * 7 1/2 ″ 29.8
    10 19 14 16 200 * 7 7/8 ″ 29.9
    10 19 14 16 203 * 8″ 30
    12 19 23 16 254 * 10″ 35.2
     dhd360-4 9 19 10 19 178 * 7″ 25.6
    INGERSOLL-RAND QL6 / QL60, ROCKMORE ROK 600A / ROK 650A / ROK 650M
    EPIROC QL 60 / TD 60 / TD 65 / TD 70 / COP 64 GOLD, BULROC HYPER 66 DH (QL 60 shank), HALCO SUPER DOMINATOR 650 HD QL60 MINCON 6 DH / 6 DH-LV / XP60 / 6 MP6 / MQ68, NUMA PATRIOT 60 WQ, PUMA 6.2 (QL 60 shank), SANDVIK RH460 6 ″ / RH460g 6″
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     ql60-1 8 16 8 16 152 6″ 23.9
    8 16 8 16 155 6.1 ″ 24
    8 16 8 16 156 6 1/8 ″ 24.1
    8 16 8 16 159 6 1/4 ″ 24.15
    8 16 10 16 165 6 1/2 ″ 25.2
    8 19 10 16 165 6 1/2 ″ 25.25
    8 19 10 16 172 6 3/4 ″ 25.7
    8 19 8 19 172 6 3/4 ″ 25.75
     ql60-2 10 16 10 16 165 6 1/2 ″ 25.4
    10 16 10 16 172 6 3/4 ″ 25.9
    10 19 14 16 190 * 7 1/2 ″ 26.5
    10 19 14 16 200 * 7 7/8 ″ 27
    10 19 14 16 203 * 8″ 31.8
    10 19 14 16 219 * 8 5/8 ″ 32
    12 19 23 16 244 * 9 5/8 ″ 51
     ql60-3 8 16 9 16 152 6″ 23.6
    8 16 9 16 155 6.1 ″ 25.1
    8 16 9 16 156 6 1/8 ″ 25.2
    8 16 9 16 159 6 1/4 ″ 25.3
    8 16 9 16 165 6 1/2 ″ 25.7
    8 19 9 16 165 6 1/2 ″ 25.73
    8 19 9 16 172 6 3/4 ″ 25.9
     ql60-4 9 19 9 16 152 6″ 23.65
    9 19 9 16 155 6.1 ″ 25.15
    9 19 9 16 156 6 1/8 ″ 25.25
    9 19 10 16 159 6 1/4 ″ 25.35
    9 19 10 16 165 6 1/2 ″ 25.75
    9 19 10 16 172 6 3/4 ″ 25.95
     ql60-5 10 16 10 16 165 6 1/2 ″ 25
    10 19 12 16 165 6 1/2 ″ 25.8
    10 16 10 16 172 6 3/4 ″ 25.7
    10 19 10 16 172 6 3/4 ″ 25.97
    10 16 12 16 180 * 7″ 26
    10 19 14 16 190 * 7 1/2 ″ 26
    10 19 14 16 200 * 7 7/8 ″ 26.5
    10 19 14 16 220 * 8 5/8 ″ 27
     ql60-6 10 16 10 16 152 6″ 23.65
    10 16 10 16 155 6.1 ″ 25.15
    10 16 10 16 156 6 1/8 ″ 25.25
    10 16 10 16 159 6 1/4 ″ 25.35
    10 16 10 16 165 6 1/2 ″ 25.75
    10 16 10 16 172 6 3/4 ″ 25.95
    10 19 9 16 172 6 3/4 ″ 25.95
    10 19 8 19 172 6 3/4 ″ 26
    INGERSOLL-RAND DHD 380
    EPIROC COP 84 / DHD 8 / TERRANOX 8, BULROC HYPER 81 (DHD 380 shank), HALCO MACH 80 / 88 (DHD 380 shank), DOMINATOR 800 / 880 / 880 DW (DHD 380 –80 shank) / MIN90 DW NUMA CHALLENGER 80 / PATRIOT 80, PUMA 8.1 (DHD 380 shank), SECOROC 8″
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     dhd380-1 10 19 14 16 203 8″ 50
    10 19 14 16 207 8 1/8 ″ 50.3
    10 19 14 16 216 8 1/2 " 52
    10 19 16 16 225 8 7/8 ″ 52.5
    10 19 16 16 229 9″ 52.65
    12 19 23 16 251 * 9 7/8 ″ 55.5
    12 19 27 16 254 * 10″ 56
    12 19 37 16 305 * 12 ″ 85
    dhd380-2 10 19 14 16 190 7 1/2 ″ 50
    10 19 14 16 194 7 5/8 ″ 49
    10 19 14 16 203 8″ 50
    10 19 14 16 207 8 1/8 ″ 50.3
    10 19 14 16 216 8 1/2 " 52
    10 19 16 16 225 8 7/8 ″ 52.5
    10 19 16 16 229 9″ 52.65
    12 19 23 16 251 * 9 7/8 ″ 55.5
    12 19 23 16 254 * 10″ 56
    12 19 31 16 305 * 12 ″ 85
    INGERSOLL-RAND QL8 / QL80
    EPIROC QL 80 / TD 80 / TD 85, BULROC HYPER 81 (QL 80 shank), HALCO DOMINATOR 850 QL80, MINCON 8.1 (QL80 shank) / MP80 / MQ80 / MP85 / MQ85 / MQ80 / MP85 / MQ85, PUMAL 801K, PUMA 801K, PUMA 801K, PUMA 801K, PUMA 801K, PUMA 801K, PUMA 801K, PUMA 801K, PUMA 801K, PUMA 801K, PUMA 801K, PUMA 801, PUMA 801K, PUMA 801, PUMA 801, PUMA 801, PUMA 801, PUMA 801, PUMA 801, PUMA 801, PUMA 0 801, PUMA. / RH460g 8 ″
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     ql80-1 10 19 14 16 203 8″ 48.86
    10 19 14 16 216 8 1/2 " 51.72
    12 19 27 16 254 * 10″ 64.3
    12 19 37 16 305 * 12 ″ 85
     ql80-2 10 19 14 16 203 8″ 48.86
    10 19 14 16 207 8 1/8 ″ 48.93
    10 19 14 16 216 8 1/2 " 49.1
    10 19 16 16 225 8 7/8 ″ 52.7
    10 19 16 16 229 9″ 53.1
    12 19 23 16 254 * 10″ 64.3
    12 19 31 16 305 * 12 ″ 85
    OSISE MI6 / M60
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     m60-1 8 16 8 16 156 6 1/8 ″ 20.4
    10 19 14 16 203 * 8″ 29.5
     m60-2jpg 8 16 9 16 156 6 1/8 ″ 20.2
    8 16 9 16 165 6 1/2 ″ 20.9
    8 16 9 16 172 6 3/4 ″ 21.6
    Iṣẹ apinfunni A 53-15 / SD6
    EPIROC COP 64M, BULROC BR6, HALCO DOMINATOR 600 (SD6 shank) SUPER DOMINATOR 650, (SD6 shank)
    MINCON 6 DHSD6, PUMA 6.2 / 6.3 (SD 6 shank), SECOROC 6 ″ M
    DHT bit Iwọn carbide Awọn iwọn D Iwọn
    Iwọn Iwaju
    [Rara.] [mm] [Rara.] [mm] [mm] [ninu] Kg
     sd6-1 8 16 8 16 152 6″ 25.9
    8 16 8 16 156 6 1/8 ″ 26.4
    8 16 8 16 159 6 1/4 ″ 27
    8 16 10 16 165 6 1/2 ″ 27.4
    10 16 10 16 165 6 1/2 ″ 27.6
    10 16 10 16 172 6 3/4 ″ 28
    10 16 10 16 178 * 7″ 28.1
    10 19 14 16 190 * 7 1/2 ″ 28.2
    10 19 14 16 200 * 7 7/8 ″ 28.45
    10 19 14 16 203 * 8″ 33.5
     sd6-2 8 16 9 16 152 6″ 25.9
    8 16 9 16 156 6 1/8 ″ 26.4
    8 16 9 16 159 6 1/4 ″ 27
    8 16 9 16 165 6 1/2 ″ 27.4
    10 16 10 16 165 6 1/2 ″ 27.6
    10 16 10 16 172 6 3/4 ″ 28.1
    10 16 10 16 178 * 7″ 27.7
    10 19 14 16 190 * 7 1/2 ″ 28
    10 19 14 16 200 * 7 7/8 ″ 28.2
    10 19 14 16 203 * 8″ 33.5

    Jẹmọ Products

    Si isalẹ The iho Hammer

    Si isalẹ The iho Hammer

    DTH liluho oniho

    DTH liluho oniho

    DTH alamuuṣẹ

    DTH alamuuṣẹ

    Ga Air titẹ DTH Hammers

    Ga Air titẹ DTH Hammers

    Low Air Titẹ DTH Hammers

    Low Air Titẹ DTH Hammers

    Aarin-Kekere Air Titẹ DTH Hammers

    Aarin-Kekere Air Titẹ DTH Hammers

    RC DTH Hammer

    RC DTH Hammer

    WhatsApp Online iwiregbe!