Reaming hakowa kayan aikin
Reaming hakowa kayan aikinana amfani da shi lokacin da ake buƙatar babban diamita don sake gyarawa bayan an haƙa rami mai zurfi zuwa zurfin.Muna keramatukin jirgi reaming kayan aikin hakowa, Maɓallin maɓalli reamingkumaadaftar reaming button ragowa.Kayan aikin hakowa na matukin jirgi sun ƙunshi adaftar matukin jirgi da maɓalli na reaming;duk da haka, duka biyuMaɓallin maɓalli reamingda adaftar reaming Buttons an tsara su guda ɗaya.
Ma'auni
• Girman zaren: R25, R28, da R32.
• Diamita na adaftar matukin jirgi: 26mm zuwa 40 mm.
•Pilot bitdigiri: 6°, 12°
• Diamita na Maɓallin Maɓalli: 64mm zuwa 225mm.
• Digiri bit na maɓallin Reamer: 6°, 12°
Siffofin
• Maɓallin allo suna da zafi da aka ɗora a cikin ɗigon raɗaɗi, yana tabbatar da daidaitattun daidaito da karko;
• An tabbatar da dogaro ta hanyar kayan bit ɗin kayan ƙira mai ƙima da maɓallin gami mai ƙima;
• Daban-daban iri da aka tsara don yanayin hakowa daban-daban da yanayin dutse;
• Babban saurin gudu da haɓaka hakowa;
• Ƙididdigar farashi, kyakkyawan aiki tare da farashi mai ma'ana.
Aikace-aikace
Hakowa tana aiki don ayyukan fashewa a cikin rami, gini, hako ma'adinai, fasa dutse, da sauransu.
6°Reaming hakowa kayan aikin |
12°Reaming hakowa kayan aikin |
Reaming Bits |
Reaming bit | Girman Carbide | Girman D | Ramin ruwa | |||||
Ma'auni | Gaba | |||||||
[Babu] | [mm] | [Babu] | [mm] | [mm] | [in] | Gaba | Gede | |
8 | 9.5 | 4 | 8 | 64 | 2 1/2 " | / | / | |
6 | 11 | 3 | 11 | 76 | 3" | |||
8 | 12.7 | 4 | 11 | 89 | 3 1/2" |
Adaftar matukin jirgi | Zare | L | D | Ramin ruwa | |||
[mm] | [in] | [mm] | [in] | Gaba | Gede | ||
R 25 | 300 | 11 13/16" | 28 | 1 3/32" | 1 | 1 | |
R 28 | 300 | 11 13/16" | 28 | 1 3/32" | 1 | 1 | |
R 32 | 300 | 11 13/16" | 28 | 1 3/32" | 1 | 1 |