Button bits grinder BTHH500

Masu niƙan iska suna buƙatar wadataccen iska mai tsabta da bushewa na mafi ƙarancin 60 psi da 29 cfm suna wucewa ta cikin mai in-line don samar da mai ga injin niƙa.Har ila yau, ana buƙatar samar da ruwa daga hanyar samar da wutar lantarki ko tari don yin aiki azaman mai sanyaya yayin aikin niƙa.Hakanan ana samun cikakken sabis ɗin ajiyar ajiya.Akwai tare da zaɓi na Hemispherical, Ballistic Semi Ballistic, Paraboloid ko Conical fil, a cikin masu girma dabam 6mm zuwa 25mm, ana samun cikakken sabis na ajiyar baya.

Semi-atomatik maɓallan raƙuman ruwa mai ƙwanƙwasaBTHH-500
Gudun juyawa	20000 RPM
Ƙarfin mota	1.5 KW
Matsin aiki	5-7 bar (100 psi)
Amfanin iska	2.2m3/min (50ft3/min)
Max.ruwa matsa lamba	4 bar (60 psi)
Diamita na bututun iska	mm19 ku
Diamita bututun ruwa	6mm ku
Nauyi excl.marufi	120 kg
Nauyi ya hada damarufi	130 kg
Matsayin sauti	92 dB(A)

Dokokin aminci

An keɓance shigarwa, kulawa, da amfani da na'urar ga ƙwararrun ma'aikata.

Kafin yin kowane tsaftacewa ko kulawa tabbatar da cire haɗin wutar lantarki.

Kar a cire kafaffen kariyar na'ura mai kare abubuwan wayar hannu.

Kar a sanya hannaye a sassan da ke da hatsarin murkushewa da/ko tarko.

Ya kamata mai aiki ya kasance ta ƙungiyar masu sarrafawa a mafi nisa da kariya.

Yin da sarrafa ayyukan aiki dole ne mai aiki ya sanya kansa koyaushe a bayan ƙungiyar sarrafawa.

Dole ne a yi sarrafa na'ura ko sashinta tare da na'ura mara amfani, an cire haɗin wutar lantarki, ta ƙwararrun ma'aikata tare da kayan aikin da suka dace.

Idan ya zama dole don maye gurbin kayan aikin injin, yi amfani da kayan gyara na asali kawai.

 

HANYOYIN TSARI DA UMURNI GA MASU AIKIN INJI

KAFIN AMFANI:

Bincika cewa injin ɗin ya tsaya tsayin daka kuma injin niƙa daidai yake kuma yana dacewa da injin.

Bincika amincin masu gadi masu kare sassa a cikin motsi.

 

LOKACIN AMFANI:

Ba da rahoto nan da nan duk wani aiki da bai dace ba ko yanayi masu haɗari;

Matsayin mai aiki yana buƙatar zama kamar kada ya kasance tare da sassan da ke cikin motsi;

Kar a cire ko gyara na'urorin kariya;

Kada ku tsoma baki akan sassan wayar hannu yayin aikin injin;

Kar ku shagala.

 

BAYAN AMFANI:

Sanya injin daidai ba tare da barin dakatar da kayan aiki ba;

Gudanar da bita da ayyukan kulawa da ake buƙata don sake amfani da injin tare da katse wutar lantarki;

A cikin ayyukan kulawa, bi alamun wannan jagorar;

Tsaftace injin.