Mga Bit ng DTH

Maikling Paglalarawan:

Dahil sa ekonomiya at malakas na kapasidad ng pagbabarena, ang down the hole hammer ay naging isang advanced na tool sa pagbabarena para sa mga industriya ng pagbabarena at pagmimina.Ang mga down the hole hammers at drill bits ay idinisenyo nang magkasama upang gumana nang maayos, na nagbibigay ng mataas na rate ng pagtagos, mahabang buhay ng serbisyo at mababang gastos.1. Maghatid ng maximum na enerhiya sa drilling bit, mabilis na bilis ng pagbabarena at mababang pagkonsumo ng hangin dahil sa espesyal na panloob na istraktura ng HD series na DTH hammer na idinisenyo ayon sa pinakabagong teorya ng pagbabarena ng bato.2. Makinis...

3″&4″DTH Bits:HD3.5,M30;DHD340,SD4,QL40,M40

5"&6"DTH Bits:DHD350,SD5,QL50,M50,DHD360;SD6,QL60,M60,

8″DTH Bits,:DHD380,SD8,QL80,M80,

Mababang presyon ng hangin DTHBits:CIR80,CIR90

Magpadala ng email sa amin I-download bilang PDF

Detalye ng Produkto

3"(DHD3.5,M30)

4"(DHD340,SD4,QL40,M40)

5"(DHD350,SD5,QL50,M50)

6"(DHD360,SD6,QL60,M60)

8"(DHD380,SD8,QL80,M80)

Misson(M16,M60,SD6)

Mga Tag ng Produkto

1. Maghatid ng maximum na enerhiya sa drilling bit, mabilis na bilis ng pagbabarena at mababang pagkonsumo ng hangin dahil sa espesyal na panloob na istraktura ng HD series na DTH hammer na idinisenyo ayon sa pinakabagong teorya ng pagbabarena ng bato.

2. Makinis na pagganap at mahabang buhay ng serbisyo ng HD series na DTH hammer dahil sa mataas na kalidad na mga materyales na bakal na haluang metal at advanced na teknolohiya sa pagpoproseso na inangkop.

3. Mababang problema rate at madaling maintenance dahil sa simple, maaasahan at madaling mag-assemble at i-disassemble panloob na istraktura ng martilyo.

4. Madaling umalis ng kaunti mula sa martilyo dahil sa multihead thread na kumukonekta sa chuck at cylinder of hammer.

5. Mapapalitan ng DTH bit at drill pipe

Ang mga low pressure at high pressure na martilyo ay magagamit sa aming kumpanya.

· Angkop para sa mataas na presyon ng pagbabarena rigs

· Pagbabarena ng balon ng tubig

· Record breaking penetration

· Pagbabarena ng bangko

· Paggalugad ng Mga Aplikasyon ng Civil Engineering

· Pinakamababang gastos sa bawat paa na drilled

· Pagmimina / Paggalugad ng Mineral

· Simple at matatag na disenyo

· Paggalugad ng Mga Aplikasyon ng Civil Engineering

· Pagbabarena ng balon ng langis

· Foot Valve ay hindi kinakailangan sa bit

· Mas mahabang bahagi ng buhay

· Pina-maximize ang kahusayan

· Bumubuo ng higit na kapangyarihan para sa anumang mga kapasidad ng compressor

· Tumagos ng 15% hanggang 30% na mas mabilis

· Nagbibigay ng karagdagang produksyon sa mas mababang halaga ng yunit

3″Mga Bit ng DTH,DHD3.5,M30;

4″DTH Bits,DHD340,SD4,QL40,M40;

5″DTH Bits,DHD350,SD5,QL50,M50,

6″DTH Bits,DHD360,SD6,QL60,M60,

8″DTH Bits,DHD380,SD8,QL80,M80,

Mababang presyon ng hangin DTHBits,CIR80,CIR90.

(1) Sukat: 90mm-605mm

(2)DTH Hammer: 3”-12”

(3)Package: sa wooden case

(4) Produktibo: 2000pcs/buwan

Nakaraan: Over Burden Drilling

Susunod: Coupling sleeves

EPIROC COP 32
SECOROC 3″
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	11	6	11	85	3 3/8″	3.7
	8	12	6	12	90	3 1/2″	4.2
INGERSOLL-RAND DHD 3.5
EPIROC COP 35 / TD 35.2 / QLX 35 / TERRANOX 3, BULROC HYPER 31 (DHD 3.5 shank), HALCO DART 350 / DOMINATOR 350 & 375 (DHD 3.5 shank), KARBO 35A & XLISS5, KARBO 35A & XLISS5 PATRIOT 35 A, PUMA 3.1 (DHD 3.5 shank), SANDVIK RH460 3.5″
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	11	6	11	85	3 3/8″	4.2
	8	11	8	11	92	3 5/8″	4.5
	8	12	6	12	92	3 5/8″	4.6
	8	12	6	12	95	3 3/4″	4.7
	8	12	7	12	100	3 15/16″	4.95
	8	12	8	12	105	4 1/8″	5.4
	8	14	7	12	105	4 1/8″	5.4
	7	11	6	11	92	3 5/8″	4.72
	7	12	6	12	95	3 3/4″	4.9
	7	12	6	12	100	3 15/16″	5.16
	7	12	6	12	105	4 1/8″	5.3
INGERSOLL-RAND DHD 3.5 HDHALCO DOMINATOR 375 (MD 35 shank), MINCON MD 35
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	12	6	12	95	3 3/4″	5.1
	8	12	7	12	100	3 15/16″	5.3
	7	14	6	14	105	4 1/8″	5.8
	8	12	8	12	105	4 1/8″	5.4
	8	14	7	12	105	4 1/8″	5.45
	7	12	6	12	95	3 3/4″	5.34
	7	12	6	12	100	3 15/16″	5.3
	7	12	7	12	105	4 1/8″	5.4

EPIROC TD 40 / QLX 40 / COP 44 GOLD
MINCON MP40 (TD40 shank), SANDVIK RH460 4″
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	14	7	13	110	4 5/16″	8
	8	13	8	13	115	4 1/2″	9.3
	8	14	7	13	115	4 1/2″	9.3
	8	14	8	13	120	4 23/32″	9.5
	8	14	9	13	125	4 15/16″	9.8
	8	14	10	13	130 *	5 1/8″	10.2
	8	14	7	12	110	4 5/16″	9.1
	8	14	8	12	115	4 1/2″	9.3
	8	16	6	14	115	4 1/2″	9.3
	8	14	8	12	120	4 23/32″	9.5
	8	14	10	12	125	4 15/16″	9.8
	8	14	8	14	130 *	5 1/8″	10.2
	8	16	10	14	140 *	5 1/2″	10.9
	8	14	8	12	115	4 1/2″	9.1
	8	14	8	12	115	4 1/2″	9.1
	8	16	8	12	125	4 15/16″	9.8
	8	16	8	12	125	4 15/16″	9.8
	8	16	8	12	130 *	5 1/8″	10.2
	8	16	8	12	130 *	5 1/8″	10.2
	8	13	8	12	115	4 1/2″	9.1
INGERSOLL-RAND DHD 340A
EPIROC COP 44 / DHD 4 / QL 340 / TERRANOX 4, BULROC HYPER 41 (DHD 340A shank), HYPER 415, HALCO DART 400 / SUPER DOMINATOR 400, 450 (DHD 340A shank), KARBO K40, MINCON 4 HR, NUMA CHALLENGER 4 / CHAMPION 40 / PATRIOT 40, PUMA 4.4 (DHD 340A shank), SANDVIK RH46 ″ Q
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	14	8	12	105	4 1/8″	7.6
	8	12	8	12	105	4 1/8″	7.5
	8	14	8	12	110	4 5/16″	7.8
	8	12	8	12	110	4 5/16″	7.8
	8	13	8	13	110	4 5/16″	7.8
	8	14	8	12	115	4 1/2″	8.1
	8	12	9	12	115	4 1/2″	8.1
	8	13	8	13	115	4 1/2″	8.1
	7	14	7	14	115	4 1/2″	8.62
	8	12	9	12	115	4 1/2″	8.1
	8	14	8	12	120	4 23/32″	8.1
	8	14	9	14	130 *	5 1/8″	9.3
	8	16	9	14	140 *	5 1/2″	11.1
	8	16	9	14	145 *	5 45/64″	11.6
	9	12	12	12	127 *	5″	8.75
	9	12	12	12	130 *	5 1/8″	9.15
	9	14	12	12	140 *	5 1/2″	10.2
	8	14	7	12	105	4 1/8″	7.7
	8	14	8	12	110	4 5/16″	8.15
	8	14	8	12	115	4 1/2″	8.5
	8	16	6	14	115	4 1/2″	8.5
	8	14	8	12	120	4 23/32″	9
	8	14	9	12	127 *	5″	9.15
	8	14	9	12	130 *	5 1/8″	9.2
	8	16	9	14	140 *	5 1/2″	11.1
	8	16	9	14	145 *	5 45/64″	11.5
	8	16	9	14	150 *	5 7/8″	12

INGERSOLL-RAND DHD 350R
EPIROC COP 54 / DHD 5 / TERRANOX 5, BULROC HYPER 51 / 55DH (DHD 350 shank), HALCO SUPER DOMINATOR 500 / 550 HD (DHD 350 shank) MINCON 5 DH / 5 BH (DHD 350 CHALLENGER), 5.2 (DHD 350 shank), SECOROC 5″ / 5″ Q
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	16	6	16	127	5″	15.85
	8	16	8	16	140	5 1/2″	15.9
	8	16	9	14	146	5 3/4″	16.6
	8	16	8	14	130	5 1/8″	14.6
	8	16	7	14	135	5 5/16″	15.7
	8	16	8	14	140	5 1/2″	15.9
	8	16	8	16	145	5 45/64″	16,60
	8	16	8	16	146	5 3/4″	16.6
	8	16	8	16	150	5 7/8″	17.2
	8	16	8	16	152 *	6″	18
	8	16	10	16	165 *	6 1/2″	18.8
	9	16	9	14	135	5 5/16″	16.7
	9	16	9	14	150	5 7/8″	17.2
	8	16	8	12	127	5″	14.5
	8	16	8	12	130	5 1/8″	14.6
	8	16	7	14	135	5 5/16″	15.7
	8	16	8	14	140	5 1/2″	15.9
	8	16	8	16	146	5 3/4″	17.1
	8	16	9	14	150	5 7/8″	16.1
	8	16	9	14	152 *	6″	17.2
	8	16	9	16	152 *	6″	17.2
	8	16	9	16	165 *	6 1/2″	18.8
	10	16	12	16	180 *	7″	25
	9	16	9	14	130	5 1/8″	15.1
	9	14	9	14	135	5 5/16″	15.7
	9	16	10	14	150	5 7/8″	16.9
INGERSOLL-RAND QL5 / QL50
EPIROC QL 50 / TD 50 / COP 54 GOLD, BULROC HYPER 55 DH, HALCO SUPER DOMINATOR 550 HD QL50, KARBO K50 MINCON MQ50, MP50 / 5 DH-QL, MP56, NUMA PATRIOT 52, NUMA PATRIOT 50 / DCS5 ), SANDVIK RH460 / RH460g 5″
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	16	6	16	130	5 1/8″	15.8
	8	16	7	16	135	5 5/16″	15.8
	8	16	7	16	140	5 1/2″	16.72
	9	14	9	16	130	5 1/8″	15.8
	9	14	10	14	135	5 5/16″	15.8
	9	14	10	14	140	5 1/2″	16.7
	8	16	8	12	130	5 1/8″	14.55
	8	16	8	14	140	5 1/2″	16.7
	8	16	10	14	140	5 1/2″	16.7
	8	16	8	16	146	5 3/4″	17
	8	16	8	16	152 *	6″	17.6
	8	16	10	16	165 *	6 1/2″	19.4
	9	16	9	14	135	5 5/16″	16.1
	9	16	9	14	140	5 1/2″	16.7
	8	16	8	12	127	5″	13.56
	8	16	8	12	130	5 1/8″	14.55
	8	16	6	16	130	5 1/8″	14.8
	8	16	6	16	135	5 5/16″	15
	8	16	8	14	140	5 1/2″	16.5
	8	16	8	16	146	5 3/4″	16.8
	8	16	9	16	152 *	6″	17.1
	8	16	9	16	165 *	6 1/2″	18.8
	10	16	12	16	180 *	7″	19.4
	9	16	9	14	130	5 1/8″	15.8
	9	14	9	14	135	5 5/16″	16.1
	9	16	9	14	150	5 7/8″	17.6
	9	16	9	16	152 *	6″	17.6

INGERSOLL-RAND DHD 360 / DH6 / SF6 / SF6.5
EPIROC COP 64 / DHD 6 / TERRANOX 6, BULROC HYPER 61 / 63 / 63 HD / 66 DH (DHD 360 shank), HALCO DOMINATOR 600 (DHD 360 shank) / SUPER DOMINATOR 600 / 650 (DHD 360 shank) 360, NUMA CHALLENGER 6 / PATRIOT 60W, PUMA 6.2 / 6.3 (DHD 360 shank), SECOROC 6″ / 6″ Q / 6″ QHD
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	16	8	16	152	6″	23.9
	8	16	8	16	156	6 1/8″	24.3
	8	16	8	16	159	6 1/4″	24.7
	8	16	10	16	165	6 1/2″	25.2
	10	16	10	16	165	6 1/2″	25.4
	10	16	10	16	172	6 3/4″	25.9
	10	16	12	16	180 *	7″	25
	10	19	14	16	190 *	7 1/2″	29.8
	10	19	14	16	200 *	7 7/8″	30
	10	19	14	16	203 *	8″	30.1
	9	16	10	16	178 *	7″	25
	8	16	9	16	152	6″	23.6
	8	16	9	16	156	6 1/8″	24
	8	16	9	16	159	6 1/4″	24.4
	8	16	9	16	165	6 1/2″	24.8
	10	16	10	16	165	6 1/2″	25
	8	19	9	16	172	6 3/4″	25.6
	10	16	10	16	172	6 3/4″	25.6
	10	19	14	16	190 *	7 1/2″	29.8
	10	19	14	16	200 *	7 7/8″	29.9
	10	19	14	16	203 *	8″	30
	12	19	23	16	254 *	10″	35.2
	9	19	10	19	178 *	7″	25.6

INGERSOLL-RAND QL6 / QL60, ROCKMORE ROK 600A / ROK 650A / ROK 650M
EPIROC QL 60 / TD 60 / TD 65 / TD 70 / COP 64 GOLD, BULROC HYPER 66 DH (QL 60 shank), HALCO SUPER DOMINATOR 650 HD QL60 MINCON 6 DH / 6 DH-LV / XP60 / 606 DH-LV / XP60 / MP606 / MQ68, NUMA PATRIOT 60 WQ, PUMA 6.2 (QL 60 shank), SANDVIK RH460 6″ / RH460g 6″
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	16	8	16	152	6″	23.9
	8	16	8	16	155	6.1″	24
	8	16	8	16	156	6 1/8″	24.1
	8	16	8	16	159	6 1/4″	24.15
	8	16	10	16	165	6 1/2″	25.2
	8	19	10	16	165	6 1/2″	25.25
	8	19	10	16	172	6 3/4″	25.7
	8	19	8	19	172	6 3/4″	25.75
	10	16	10	16	165	6 1/2″	25.4
	10	16	10	16	172	6 3/4″	25.9
	10	19	14	16	190 *	7 1/2″	26.5
	10	19	14	16	200 *	7 7/8″	27
	10	19	14	16	203 *	8″	31.8
	10	19	14	16	219 *	8 5/8″	32
	12	19	23	16	244 *	9 5/8″	51
	8	16	9	16	152	6″	23.6
	8	16	9	16	155	6.1″	25.1
	8	16	9	16	156	6 1/8″	25.2
	8	16	9	16	159	6 1/4″	25.3
	8	16	9	16	165	6 1/2″	25.7
	8	19	9	16	165	6 1/2″	25.73
	8	19	9	16	172	6 3/4″	25.9
	9	19	9	16	152	6″	23.65
	9	19	9	16	155	6.1″	25.15
	9	19	9	16	156	6 1/8″	25.25
	9	19	10	16	159	6 1/4″	25.35
	9	19	10	16	165	6 1/2″	25.75
	9	19	10	16	172	6 3/4″	25.95
	10	16	10	16	165	6 1/2″	25
	10	19	12	16	165	6 1/2″	25.8
	10	16	10	16	172	6 3/4″	25.7
	10	19	10	16	172	6 3/4″	25.97
	10	16	12	16	180 *	7″	26
	10	19	14	16	190 *	7 1/2″	26
	10	19	14	16	200 *	7 7/8″	26.5
	10	19	14	16	220 *	8 5/8″	27
	10	16	10	16	152	6″	23.65
	10	16	10	16	155	6.1″	25.15
	10	16	10	16	156	6 1/8″	25.25
	10	16	10	16	159	6 1/4″	25.35
	10	16	10	16	165	6 1/2″	25.75
	10	16	10	16	172	6 3/4″	25.95
	10	19	9	16	172	6 3/4″	25.95
	10	19	8	19	172	6 3/4″	26

INGERSOLL-RAND DHD 380
EPIROC COP 84 / DHD 8 / TERRANOX 8, BULROC HYPER 81 (DHD 380 shank), HALCO MACH 80 / 88 (DHD 380 shank), DOMINATOR 800 / 880 / 880 DW (DHD 380 shank) / MINCON9 DH380 NUMA CHALLENGER 80 / PATRIOT 80, PUMA 8.1 (DHD 380 shank), SECOROC 8″
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	10	19	14	16	203	8″	50
	10	19	14	16	207	8 1/8″	50.3
	10	19	14	16	216	8 1/2″	52
	10	19	16	16	225	8 7/8″	52.5
	10	19	16	16	229	9″	52.65
	12	19	23	16	251 *	9 7/8″	55.5
	12	19	27	16	254 *	10″	56
	12	19	37	16	305 *	12″	85
	10	19	14	16	190	7 1/2″	50
	10	19	14	16	194	7 5/8″	49
	10	19	14	16	203	8″	50
	10	19	14	16	207	8 1/8″	50.3
	10	19	14	16	216	8 1/2″	52
	10	19	16	16	225	8 7/8″	52.5
	10	19	16	16	229	9″	52.65
	12	19	23	16	251 *	9 7/8″	55.5
	12	19	23	16	254 *	10″	56
	12	19	31	16	305 *	12″	85

INGERSOLL-RAND QL8 / QL80
EPIROC QL 80 / TD 80 / TD 85, BULROC HYPER 81 (QL 80 shank), HALCO DOMINATOR 850 QL80, MINCON 8.1 (QL80 shank) / MP80 / MQ80 / MP85 / MQ85, PUMAL8DV01 (QUMAL8DV01) / RH460g 8″
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	10	19	14	16	203	8″	48.86
	10	19	14	16	216	8 1/2″	51.72
	12	19	27	16	254 *	10″	64.3
	12	19	37	16	305 *	12″	85
	10	19	14	16	203	8″	48.86
	10	19	14	16	207	8 1/8″	48.93
	10	19	14	16	216	8 1/2″	49.1
	10	19	16	16	225	8 7/8″	52.7
	10	19	16	16	229	9″	53.1
	12	19	23	16	254 *	10″	64.3
	12	19	31	16	305 *	12″	85

MISYON MI6 / M60
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	16	8	16	156	6 1/8″	20.4
	10	19	14	16	203 *	8″	29.5
	8	16	9	16	156	6 1/8″	20.2
	8	16	9	16	165	6 1/2″	20.9
	8	16	9	16	172	6 3/4″	21.6

MISYON A 53-15 / SD6
EPIROC COP 64M, BULROC BR6, HALCO DOMINATOR 600 (SD6 shank) SUPER DOMINATOR 650, (SD6 shank) MINCON 6 DHSD6, PUMA 6.2 / 6.3 (SD 6 shank), SECOROC 6″ M
DHT bit	Sukat ng karbida				Mga sukat D		Timbang
	Panukat		harap		Mga sukat D		Timbang
	[Hindi.]	[mm]	[Hindi.]	[mm]	[mm]	[sa]	Kg
	8	16	8	16	152	6″	25.9
	8	16	8	16	156	6 1/8″	26.4
	8	16	8	16	159	6 1/4″	27
	8	16	10	16	165	6 1/2″	27.4
	10	16	10	16	165	6 1/2″	27.6
	10	16	10	16	172	6 3/4″	28
	10	16	10	16	178 *	7″	28.1
	10	19	14	16	190 *	7 1/2″	28.2
	10	19	14	16	200 *	7 7/8″	28.45
	10	19	14	16	203 *	8″	33.5
	8	16	9	16	152	6″	25.9
	8	16	9	16	156	6 1/8″	26.4
	8	16	9	16	159	6 1/4″	27
	8	16	9	16	165	6 1/2″	27.4
	10	16	10	16	165	6 1/2″	27.6
	10	16	10	16	172	6 3/4″	28.1
	10	16	10	16	178 *	7″	27.7
	10	19	14	16	190 *	7 1/2″	28
	10	19	14	16	200 *	7 7/8″	28.2
	10	19	14	16	203 *	8″	33.5