Pagbabarena ng bangko

Maikling Paglalarawan:

Kasama sa bench at production drilling tool ang mga rod, shank adapter, coupling at bits.Marami kaming 9 na thread: R3212, R32, HL38, T38, T45, T51, T60, ST58 at ST68.Magagamit ang mga ito sa mga buton bit, cross bit at reaming na mga produkto.Kasama sa komprehensibong hanay ng mga bench at production na rock drilling tool ng Sanshan drilling ang lahat mula sa 1” rope thread equipment hanggang sa T60 thread equipment, Maraming mga customer ang nagsasabi na ang drill rods, tubes at button bits ay ang pinakamahusay sa mar...


Detalye ng Produkto

R32

T35

R38

T38

T45

T51

ST58

GT60

ST68

Mga Tag ng Produkto

Kasama sa bench at production drilling tool ang mga rod, shank adapter, coupling at bits.Mayroon kaming pangunahing 9 na mga thread:R3212, R32,HL38, T38, T45, T51, T60,ST58atST68.Maaari silang magamit sabuton bits, cross bits at reaming na mga produkto.

Kasama sa komprehensibong hanay ng mga bench at production rock drilling tool ng Sanshan drilling ang lahat mula sa 1” rope thread equipment hanggang sa T60 thread equipment, Maraming mga customer ang nagsasabi na ang drill rods, tubes atbuton bits ay ang pinakamahusay sa merkado ngayon.Sabihin na nating mapapabuti nila ang pagiging produktibo nang malaki.

Bench drilling-R32
 r32
Bench pagbabarena-T35
 t35
Bench drilling-R38
 r38
Bench drilling-T38
 t38
Bench drilling-T45
 t45
Bench drilling-T51
 t51
Bench drilling-ST58
 st58
Bench drilling-GT60
gt60

R25 (1”),R28 (1 1/8”),R32 (1 1/4”),R/T38 (1 1/2”),T45 (1 3/4”),T51 (2”), T60 (2 3/8”)
Drill bit R/T38, Extension rod T38 – Hex.32 mm – T38,Extension rod T38 – Round 38 mm – T38 (Speedrod),Extension rod R38 – Round 38 mm – R38,
Extension rod T38 – Round 38 mm – T38,Extension rod T38 – Round 38 mm – T38 (may double thread)Guide rod T38 – Round 45 mm – T38 (Speedrod),
Gabay na tuboT38,Coupling R/T 38.reaming bit,pilot adpter,

Paglalarawan:extension baras, ang iba pang mga pangalan ay Extension drill steel, Extension drill rod, at Extension steel, M/F rod ( Speedrod ),

 


  • Nakaraan:
  • Susunod:

  • tr32

    Button bit Sukat ng karbida Mga sukat D Flushing hole
    Panukat harap
    [Hindi.] [mm] [Hindi.] [mm] [mm] [sa] harap Gilid
     r32-button-bit-7 5 9 2 9 41 1 5/8″ 1 1
    5 9.5 2 8 43 1 11/16″ 1 1
    5 9.5 2 9 43 1 11/16″ 1 1
    5 10 2 9 45 1 3/4″ 1 1
    5 11 2 9 48 1 7/8″ 1 2
    5 11 2 10 51 2″ 1 1
     r32-button-bit-8 6 8 2 8 41 1 5/8″ 2 0
    6 8 2 8 41 1 5/8″ 2 1
    6 8 2 8 43 1 11/16″ 2 0
    6 9 2 9 45 1 3/4″ 2 0
    6 9.5 2 9.5 48 1 7/8″ 2 0
    6 11 2 9 51 2″ 2 0
     r32-button-bit-9 6 9 3 7 43 1 11/16″ 3 1
    6 9 3 8 45 1 3/4″ 3 1
    6 10 3 8 45 1 3/4″ 3 1
    6 9 3 9 48 1 7/8″ 3 1
    6 10 3 8 48 1 7/8″ 3 1
    6 11 3 9 51 2″ 3 1
    6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
     r32-button-bit-9-2 6 10 3 8 43 1 11/16″ 3 1
    6 9 3 7 43 1 11/16″ 3 1
    6 10 3 8 45 1 3/4″ 3 1
    6 10 3 8 48 1 7/8″ 3 1
    Patag na Mukha / Retrac
     r32-button-bit-flatface-9 6 9 3 9 48 1 7/8″ 3 1
    6 10 3 9.5 51 2″ 3 1
    6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
    Pagbabarena ng bangko
    Patag na mukha
     r32-bench-flatface 8 11 6 11 76 3″ 2 0
    8 10 4 10 64 2 1/2″ 2 0
    Drop Center
     r32-bench-dropcenter-10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
    Drop Center
     r32-bench-dropcenter-11 6 14 3/1 12.7 / 9.5 89 3 1/2″ 3 0
    6 14 3/1 12.7 / 9.5 89 3 1/2″ 3 0
    Patag na Mukha / Retrac
     r32-bench-flatface-retrac-12 8 10 4 10 64 2 1/2″ 2 0
    Patag na Mukha / Retrac
     r32-bench-flatface-retrac-14 8 11 6 11 76 3″ 2 0
    Drop Center / Retrac
     r32-bench-dropcenter-retrac-11 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 12.7 3/1 10 / 9.5 76 3″ 3 0
    Drop Center / Retrac
     r32-bench-dropcenter-retrac-14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
    8 11 4/2 11 / 9.5 89 3 1/2″ 4 1

     

    R32 Cross bit Sukat ng karbida Mga sukat D Flushing hole
    Lapad taas
    [mm] [mm] [mm] [sa] harap Gilid
     r32-cross-bit 11.5 19 41 1 5/8″ 1 4
    9.5 19 43 1 11/16″ 1 4
    11.5 19 45 1 3/4″ 1 4
    9.5 19 48 1 7/8″ 1 4
    9.5 19 51 2″ 1 4
    9.5 19 57 2 1/4″ 1 4

     

     

    R32 – R32 – Rd 32 1-1/4″ ROPE THREAD (32mm) Carburized
     r32drillrod D LENGTH (L) THREAD
    mm FT Lifit Tama
    RD 32 610 2′ R32 R32
    RD 32 915 3′ R32 R32
    RD 32 1000 3′ 3″ R32 R32
    RD 32 1220 4′ R32 R32
    RD 32 1525 5′ R32 R32
    RD 32 1830 6′ R32 R32
    RD 32 2000 6′ 7″ R32 R32
    RD 32 2435 8′ R32 R32
    RD 32 3000 9′ 10″ R32 R32
    RD 32 3050 10′ R32 R32
    RD 32 3660 12′ R32 R32
    RD 32 4265 14′ R32 R32
    RD 32 4915 16′ 1-1/2″ R32 R32
    RD 32 5490 18′ R32 R32
    MF-Rod R32 – R32 – Rd 32 1-1/4″ ROPE THREAD (32mm) Carburized
     r32drillrod-mf D LENGTH (L) THREAD
    mm FT Lifit Tama
    RD 32 915 3′ R32F R32
    RD 32 1000 3′ 3″ R32F R32
    RD 32 1220 4′ R32F R32
    RD 32 1525 5′ R32F R32
    RD 32 1830 6′ R32F R32
    RD 32 2435 8′ R32F R32
    RD 32 2700 8′ 10″ R32F R32
    RD 32 2850 9′ 4″ R32F R32
    RD 32 3000 9′ 10″ R32F R32
    RD 32 3050 10′ R32F R32
    RD 32 3660 12′ R32F R32
    RD 32 4000 13′ 1-1/2″ R32F R32
    RD 32 4270 14′ R32F R32
    RD 32 5370 17′ 7-1/2″ R32F R32
    RD 32 6300 20′ 8″ R32F R32

    t35

    Button bit Sukat ng karbida Mga sukat D Flushing hole
    Panukat harap
    [Hindi.] [mm] [Hindi.] [mm] [mm] [sa] harap Gilid
     buttonbit-flatface 6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
    Patag na Mukha / Retrac
     buttonbit-flatface-retrac 6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1

     

    MF-Rod T35 – T35 – Rd 39 1-3/8″ TRAPEZOIDAL THREAD (35mm) Carburized
     t35mfrod D LENGTH (L) THREAD
    mm FT Lifit Tama
    48 1220 4′ T35 T35
    48 1830 6′ T35 T35
    48 2435 8′ T35 T35
    48 3050 10′ T35 T35
    48 3660 12′ T35 T35
    48 4270 14′ T35 T35

    r38

    Button bit Sukat ng karbida Mga sukat D Flushing hole
    Panukat harap
    [Hindi.] [mm] [Hindi.] [mm] [mm] [sa] harap Gilid
     buton-r38-f12 8 10 4 10 64 2 1/2″ 2 0
     buton-r38-f14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    Drop Center
     buttonbit-r38-d10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11 / 9.5 70 2 3/4″ 3 0
    6 11 3/1 11 / 9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-r38-d11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
    6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0

     

    R38 Cross bit Sukat ng karbida Mga sukat D Flushing hole
    Lapad taas
    [mm] [mm] [mm] [sa] harap Gilid
     crossbit-r38 12 20.6 64 2 1/2″ 1 4
    12.7 25 70 2 3/4″ 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    R38 – R38 – Rd 39 1-1/2″ ROPE THREAD (38mm) Carburized
     r38drillrods D LENGTH (L) THREAD
    mm FT Lifit Tama
    RD 39 915 3′ R38 R38
    RD 39 1000 3′ 3″ R38 R38
    RD 39 1220 4′ R38 R38
    RD 39 1500 4′ 11″ R38 R38
    RD 39 1830 6′ R38 R38
    RD 39 2000 6′ 7″ R38 R38
    RD 39 2435 8′ R38 R38
    RD 39 3050 10′ R38 R38
    RD 39 3660 12′ R38 R38
    RD 39 4000 14′ R38 R38
    MF-Rod R38 – R38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
     r38mfrod D LENGTH (L) THREAD
    mm FT Lifit Tama
    56 1220 4′ R38F R38
    56 1525 5′ R38F R38
    56 1830 6′ R38F R38
    56 2000 6′ 7″ R38F R38
    56 3050 10′ R38F R38
    56 3660 12′ R38F R38
    56 4265 14′ R38F R38

    t38

    Button bit Sukat ng karbida Mga sukat D Flushing hole
    Panukat harap
    [Hindi.] [mm] [Hindi.] [mm] [mm] [sa] harap Gilid
     buttonbit-t38-f9 6 10 3 10 57 2 1/4″ 3 1
    6 11 3 11 64 2 1/2″ 3 1
     buttonbit-t38-f9-2 6 11 3 9.5 57 2 1/4″ 1 2
    6 12.7 3 11 64 2 1/2″ 1 2
     buttonbit-t38-f10 6 12.7 3 12.7 76 3″ 3 1
    6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t38-f11 6 12.7 5 11 70 2 3/4″ 1 2
    6 12.7 5 11 76 3″ 1 2
     buttonbit-t38-f12 8 10 4 10 64 2 1/2″ 2 0
    8 10 4 10 70 2 3/4″ 2 0
     buttonbit-t38-f13 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t38-f17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
    Drop Center
     buttonbit-t38-d10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11 / 9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-t38-d11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t38-d13 8 11 4/1 10/10 76 3″ 4 0
     buttonbit-t38-d14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 0
     buttonbit-t38-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    Patag na Mukha / Retrac
     buttonbit-t38-fr9 6 11 3 9.5 57 2 1/4″ 1 2
    6 12.7 3 11 64 2 1/2″ 1 2
     buttonbit-t38-fr9-2 6 12.7 3 11 64 2 1/2″ 3 0
    6 12.7 3 12.7 76 3″ 3 1
    buttonbit-t38-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t38-fr12 8 10 4 10 64 2 1/2″ 2 0
     buttonbit-t38-fr13 8 12.7 5 10 76 3″ 4 0
     buttonbit-t38-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 1
    Drop Center / Retrac
     buttonbit-t38-dr10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11 / 9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-t38-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t38-dr13 8 11 4/1 10/10 76 3″ 4 0
     buttonbit-t38-dr14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
     buttonbit-t38-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1

     

    T38 Cross bit Sukat ng karbida Mga sukat D Flushing hole
    Lapad taas
    [mm] [mm] [mm] [sa] harap Gilid
     crossbit-t38 12.7 20.6 64 2 1/2″ 1 4
    12.7 25 70 2 3/4″ 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    T38 – T38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
     t38drillrod D LENGTH (L) THREAD
    mm FT Lifit Tama
    RD 39 1000 3′ 3″ T38 T38
    RD 39 1220 4′ T38 T38
    RD 39 1500 4′ 11″ T38 T38
    RD 39 1525 5′ T38 T38
    RD 39 1830 6′ T38 T38
    RD 39 2000 6′ 7″ T38 T38
    RD 39 2435 8′ T38 T38
    RD 39 3000 9′ 10″ T38 T38
    RD 39 3050 10′ T38 T38
    RD 39 3660 12′ T38 T38
    RD 39 4000 13′ 1-1/2″ T38 T38
    RD 39 4265 14′ T38 T38
    TANDEM THREAD T38 – T38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
     t38drillrod-tandem-therad D LENGTH (L) THREAD
    mm FT Lifit Tama
    RD 39 3050 10′ T38/T38 T38/T38
    RD 39 3660 12′ T38/T38 T38/T38
    RD 39 4265 14′ T38/T38 T38/T38
    MF-Rod T38 – T38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
     t38mfrod D LENGTH (L) THREAD
    mm FT Lifit Tama
    56 915 3′ T38F T38
    56 1000 3′ 3″ T38F T38
    56 1220 4′ T38F T38
    56 1525 5′ T38F T38
    56 1830 6′ T38F T38
    56 2000 6′ 7″ T38F T38
    56 2435 8′ T38F T38
    56 3000 9′ 10″ T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38
    56 4270 14′ T38F T38
    MF-Tube T38 – T38 – Rd 56 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 2-7/32″ ROUND (56mm) Carburized
     t38mftube D LENGTH (L) THREAD
    mm FT Lifit Tama
    56 1220 4′ T38F T38
    56 1525 5′ T38F T38
    56 1830 6′ T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38

    t45

    Button bit Sukat ng karbida Mga sukat D Flushing hole
    Panukat harap
    [Hindi.] [mm] [Hindi.] [mm] [mm] [sa] harap Gilid
     buttonbit-t45-9 6 12.7 3 12.7 76 3″ 3 1
     buttonbit-t45-10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t45-13 8 12.7 5 10 76 3″ 4 0
     buttonbit-t45-14 8 14 6 12.7 102 4″ 4 2
     buttonbit-t45-14-2 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t45-16 8 16 8 14 127 5″ 2 0
    8 16 8 16 152 6″ 2 0
     buttonbit-t45-17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t45-18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
    Drop Center
     buttonbit-t45-d11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t45-d13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t45-d14 8 11 4/2 11 / 9.5 83 3 1/4″ 4 1
    8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
     buttonbit-t45-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14/11 115 4 1/2″ 4 0
    Patag na Mukha / Retrac
     buttonbit-t45-fr9 6 12.7 3 12.7 76 3″ 3 1
     buttonbit-t45-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t45-fr13 8 12.7 5 10 76 3″ 4 0
    8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t45-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t45-fr16 8 16 8 14 127 5″ 2 0
    Drop Center / Retrac
     buttonbit-t45-dr10 6 11 3/1 11 / 9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-t45-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t45-dr13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t45-dr14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
     buttonbit-t45-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 2

     

    T45 Cross bit Sukat ng karbida Mga sukat D Flushing hole
    Lapad taas
    [mm] [mm] [mm] [sa] harap Gilid
     crossbit-t45 12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    T45 – T45 – Rd 46 1-3/4″ TRAPEZOIDAL THREAD (45mm) Carburized
     t45drillrod D LENGTH (L) THREAD
    mm FT Lifit Tama
    RD 46 1000 3′ 3″ T45 T45
    RD 46 1220 4′ T45 T45
    RD 46 1500 4′ 11″ T45 T45
    RD 46 1525 5′ T45 T45
    RD 46 1830 6′ T45 T45
    RD 46 2000 6′ 7″ T45 T45
    RD 46 2435 8′ T45 T45
    RD 46 3000 9′ 10″ T45 T45
    RD 46 3050 10′ T45 T45
    RD 46 3660 12′ T45 T45
    RD 46 4265 14′ T45 T45
    RD 46 4875 16′ T45 T45
    RD 46 5490 18′ T45 T45
    RD 46 6095 20′ T45 T45
    TANDEM THREAD T45 – T45 – Rd 46 1-3/4″ TRAPEZOIDAL THREAD (45mm) Carburized
     t45drillrod-tandem-thread D LENGTH (L) THREAD
    mm FT Lifit Tama
    RD 39 3050 10′ T45/T45 T45/T45
    RD 39 3660 12′ T45/T45 T45/T45
    RD 39 4265 14′ T45/T45 T45/T45
    MF-Rod T45 – T45 – Rd 46 1-3/4″ TRAPEZOIDAL THREAD (45mm) Carburized
     t45mfrod D LENGTH (L) THREAD
    mm FT Lifit Tama
    64 1000 3′ 3″ T45F T45
    64 1220 4′ T45F T45
    64 1500 4′ 11″ T45F T45
    64 1525 5′ T45F T45
    64 1830 6′ T45F T45
    64 2000 6′ 7″ T45F T45
    64 2435 8′ T45F T45
    64 3000 9′ 10″ T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    64 4880 16′ T45F T45
    64 5490 18′ T45F T45
    64 6100 20′ T45F T45
    MF-Tube T45 – T45 – Rd 64 1-3/4″ TRAPEZOIDAL THREAD (45mm) X 2-1/2″ ROUND (64mm) Carburized
     t45mftube D LENGTH (L) THREAD
    mm FT Lifit Tama
    64 1220 4′ T45F T45
    64 1525 5′ T45F T45
    64 1830 6′ T45F T45
    64 2440 8′ T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    MF-Tube T45 – T45 – Rd 76 1-3/4″ TRAPEZOIDAL THREAD (45mm) X 2-1/2″ ROUND (64mm) Carburized
     t45mftube D LENGTH (L) THREAD
    mm FT Lifit Tama
    76 1220 4′ T45F T45
    76 1525 5′ T45F T45
    76 1830 6′ T45F T45
    76 2440 8′ T45F T45
    76 3050 10′ T45F T45
    76 3660 12′ T45F T45

    t51

    Button bit Sukat ng karbida Mga sukat D Flushing hole
    Panukat harap
    [Hindi.] [mm] [Hindi.] [mm] [mm] [sa] harap Gilid
     buttonbit-t51-f10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t51-f14 8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 11 85 3 3/8″ 2 1
    8 12.7 6 11 85 3 3/8″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 2
    8 14 6 14 102 4″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t51-f16 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2″ 2 0
     buttonbit-t51-f13 8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t51-f14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-t51-f15 8 14 7 14 115 4 1/2″ 4 2
    8 16 7 14 121 4 3/4″ 4 2
     buttonbit-t51-f16 8 16 8 14 127 5″ 4 2
     buttonbit-t51-f16-2 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2″ 2 0
     buttonbit-t51-f17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t51-fr18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-t51-f19 10 14 9 12.7 115 4 1/2″ 5 0
    10 16 7 16 127 5″ 5 0
    10 16 8 16 140 5 1/2″ 5 0
    Drop Center
     buttonbit-t51-d11 6 12.7 3/2 11 / 9.5 80 3 1/8″ 3 0
    6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t51-d13 8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t51-d14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 0
     buttonbit-t51-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 0
     buttonbit-t51-d16 8 16 4/4 16 / 14 140 5 1/2″ 4 0
     buttonbit-t51-d18 10 14 5/3 12.7 / 12.7 115 4 1/2″ 5 0
    10 16 5/3 16 / 12.7 127 5″ 5 0
    10 16 5/3 16 / 14 140 5 1/2″ 5 0
    Patag na Mukha / Retrac
     buttonbit-t51-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t51-fr14 8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t51-fr16 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2″ 2 0
     buttonbit-t51-fr17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t51-fr18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-t51-fr13 8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t51-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-t51-fr15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-t51-fr16 8 16 8 14 127 5″ 4 2
    8 14 8 14 127 5″ 4 2
    Drop Center / Retrac
     buttonbit-t51-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t51-dr13 8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t51-dr14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
    8 12.7 4/2 11 / 9.5 89 3 1/2″ 4 1
    8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
     buttonbit-t51-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 0
     buttonbit-t51-dr16 8 16 4/4 16 / 14 140 5 1/2″ 4 0

    st58

    Button bit Sukat ng karbida Mga sukat D Flushing hole
    Panukat harap
    [Hindi.] [mm] [Hindi.] [mm] [mm] [sa] harap Gilid
    Patag na Mukha / Retrac
     buttonbit-st58-fr17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 11 93 3 11/16″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
    Drop Center / Retrac
     buttonbit-st58-dr14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
    8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
     buttonbit-st58-dr15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 0

     

    MF-Rod ST58 – ST58 – Rd 60 2-1/4″ TRAPEZOIDAL THREAD (58mm) Carburized
     st58mfrod D LENGTH (L) THREAD
    mm FT Lifit Tama
    81 3660 12′ ST58F ST58
    81 4270 14′ ST58F ST58
    81 5490 18′ ST58F ST58
    81 6100 20′ ST58F ST58
    MF-Tube ST58 – ST58 – Rd 76 2-1/4″ TRAPEZOIDAL THREAD (58mm) X 3″ ROUND (76mm) Carburized
     st58mftube D LENGTH (L) THREAD
    mm FT Lifit Tama
    76 1220 4′ ST58F ST58
    76 1525 5′ ST58F ST58
    76 1830 6′ ST58F ST58
    76 2440 8′ ST58F ST58
    76 3050 10′ ST58F ST58
    76 3660 12′ ST58F ST58
    76 4270 14′ ST58F ST58
    76 5200 17′ 3/4″ ST58F ST58

    gt60

    Button bit Sukat ng karbida Mga sukat D Flushing hole
    Panukat harap
    [Hindi.] [mm] [Hindi.] [mm] [mm] [sa] harap Gilid
     buttonbit-gt60-f14 8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
     buttonbit-gt60-f14-2 8 14 6 12.7 102 4″ 4 2
    8 16 6 12.7 102 4″ 4 2
     buttonbit-gt60-f15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-gt60-f16 8 16 8 14 127 5″ 4 2
     buttonbit-gt60-f18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-gt60-fs19 10 14 9 12.7 115 4 1/2″ 5 0
    10 16 7 16 127 5″ 5 0
    10 16 8 16 140 5 1/2″ 5 0
    10 16 8 16 152 6″ 5 0
    Drop Center
     buttonbit-gt60-d14 8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
    8 12.7 4/2 12.7 / 9.5 95 3 3/4″ 4 0
     buttonbit-gt60-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 1
     buttonbit-gt60-d16 8 16 4/4 16 / 14 140 5 1/2″ 4 2
    8 16 6/4 16 / 14 152 6″ 4 0
     buttonbit-gt60-ds18 10 14 5/3 12.7 / 12.7 16 / 12.7 115 4 1/2″ 5 0
    10 16 5/3 127 5″ 5 0
    10 16 5/4 16 / 14 140 5 1/2″ 5 0
    Patag na Mukha / Retrac
     buttonbit-gt60-fr14 8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
     buttonbit-gt60-fr18 9 12.7 9 11 93 3 11/16″ 1 0
     buttonbit-gt60-fr18-2 9 12.7 9 12.7 93 3 11/16″ 2 0
     buttonbit-gt60-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-gt60-fr15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-gt60-fr16 8 16 8 14 127 5″ 4 2
     buttonbit-gt60-fr17 9 12.7 8 11 93 3 11/16″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-gt60-fr18-2 9 14 9 12.7 102 4″ 3 1
    9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
    9 16 9 16 127 5″ 3 1
    Drop Center / Retrac
     buttonbit-gt60-dr14 8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
    8 12.7 4/2 12.7 / 9.5 95 3 3/4″ 4 0
     buttonbit-gt60-dr15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 0
      buttonbit-gt60-drs18 10 14 5/3 12.7 / 12.7 115 4 1/2″ 5 0
    10 16 5/3 16 / 12.7 127 5″ 5 0
    10 16 5/4 16 / 14 140 5 1/2″ 5 0

     

    MF-Rod GT60 – GT60 – Rd 64 2-1/4″ TRAPEZOIDAL THREAD (60mm) 3-3/8″ FEMALE OD (85MM) Carburized
     gt60mfrod D LENGTH (L) THREAD
    mm FT Lifit Tama
    85 3660 12′ GT60F GT60
    85 4270 14′ GT60F GT60
    85 6100 20′ GT60F GT60
    MF-Tube GT60 – GT60 – Rd 76 2-1/4″ TRAPEZOIDAL THREAD (60mm) X 3″ ROUND (76mm) Carburized
     gt60mftube D LENGTH (L) THREAD
    mm FT Lifit Tama
    76 1220 4′ GT60F GT60
    76 1525 5′ GT60F GT60
    76 1830 6′ GT60F GT60
    76 2440 8′ GT60F GT60
    76 3050 10′ GT60F GT60
    76 3660 12′ GT60F GT60
    76 4270 14′ GT60F GT60
    76 5200 17′ 3/4″ GT60F GT60
    Button bit Sukat ng karbida Mga sukat D Flushing hole
    Panukat harap
    [Hindi.] [mm] [Hindi.] [mm] [mm] [sa] harap Gilid
     ST68-1 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2″ 4 0
    Gabay sa Retrac
     ST68-2 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2″ 4 0
    8 12 10 12 102 4″ 4 0
    Mabigat na tungkulin
     ST68-3 6 12 8 14 89 3 1/2″ 2 0
    Naka-collar bit
     ST68-4 8 16 9 16 152 6″ 3 0
    Retrac bit, Mabigat na Tungkulin
     ST68-5 5 14 8 16 102 4″ 2 0
    Reaming bit
     ST68-6 4 16 8 16 152 4 1/2″ 4
    9 16 9 16 204 5″ 3 0
    9 16 9 18 254 4 1/2″ 3 0

     

     ST68 D LENGTH (L) THREAD
    mm FT Lifit Tama
    87 1525 5′ ST68F ST68
    87 1830 6′ ST68F ST68

    Kaugnay na Mga Produkto

    WhatsApp Online Chat!