Pūnaha punga keri-whaiaro
Ka whakamahia nuitia te punga i roto i te kauhanga mo te tautoko i mua, te titahatanga, te takutai, te maina, nga kaupapa tiaki wai, Te turanga hangahanga, te whakakaha i te rori me te maimoatanga hapa o te whenua penei i te pahekeheke, te kapiti, me te tau totohu, kaore e taea te whakakapi i te waahi hangahanga whaiti.
NGA PAINGA
Pūnaha Punga Pae Hollow Whaiaro:
Kei roto i te pae miro tuwhera ka honoa ki te moka keri hei mahi keri.Ko te pae tuwhera ka taea e te hau me te wai te haere noa i roto i te pae i te wa e keri ana hei tango i nga otaota, ka oti te keri i te hohonutanga e hiahiatia ana, ka whakakiia e te grout te pae tuwhera ma te pehanga mo o raatau hiahia me te kapi katoa i te raka.
Kaihono: Ka taea te whakamahi i te hono ki te hono atu ki nga tutaki hollow me te whakaroa i te roa o te pou, ko te tikanga ka taea te whakaroa i te punga me nga hononga.
Te pereti me te nati: Kua whakauruhia te pereti me te nati kia rite ki o raatau whakaritenga hoahoa.
Maaka Drill: Ka kowhiria te moka wiri ina kowhiria te ahua o te whenua.
R25 Punga Keri Whaiaro
Pae Punga Hollow | |||||
| Rahi | Dia waho. | Roto Dia. | Uta Mutunga | Tukua Uta | Taumaha |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| R25-12 | 25 | 12 | 200 | 150 | 2.35 |
Mata Drill | ||||
| Momo | Dia waho. | Taumaha | Awhe Taupānga (He Tohutohu) | |
| (mm) | (inihi) | (Kg) | ||
| Maka moka ripeka | 42 | 1.65 | 0.35 | Makahia he moka whiti mo te kirikiri me te kirikiri |
| 51 | 2 | 0.38 | ||
| moka ripeka maitai | 42 | 1.65 | 0.3 | Moka ripeka kua whakapakeketia mo nga ahuatanga mahorahora ki te reo matotahi me nga toka iti. |
| 51 | 2 | 0.4 | ||
| TC ripeka bit | 42 | 1.65 | 0.35 | TC moka whiti mo nga hanganga toka ngawari ki waenga |
| 51 | 2 | 0.45 | ||
Kaihonohono | ||||
| Rahi | Dia waho. | Te roa | Taumaha | Tuhipoka |
| (mm) | (mm) | (Kg/pc) | ||
| R25-S | 36 | 150 | 0.66 | Me te hanganga hiri |
| R25-E | 36 | 150 | 0.66 | Kaore he hanganga hiri |
Nati Hex | ||||
| Rahi | Rahi Kī | Te roa | Taumaha | Te pakeke |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| R25-S | 41 | 30 | 0.2 | 25-30 |
Pereti Domed | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| R25-E | 150×150 | 8 | 30 | 1.4 |
| 150×150 | 5 | 28 | 0.85 | |
| 200×200 | 8 | 32 | 3.2 | |
R32 Punga Keri Whaiaro
Pae Punga Hollow | |||||
| Rahi | Dia waho. | Roto Dia. | Uta Mutunga | Tukua Uta | Taumaha |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R32/20 | 32 | 20 | 210 | 160 | 2.83 |
| S-R32/17 | 32 | 17 | 280 | 230 | 3.5 |
| S-R32/15 | 32 | 15 | 360 | 280 | 4 |
| E-R32/21 | 32 | 21 | 210 | 160 | 2.6 |
| E-R32/19 | 32 | 19 | 280 | 230 | 2.95 |
| E-R32/17 | 32 | 17 | 360 | 280 | 3.5 |
| E-R32/15 | 32 | 15 | 405 | 320 | 4 |
| C-R32/21 | 32 | 21 | 250 | 190 | 2.6 |
| C-R32/20 | 32 | 20 | 280 | 230 | 2.83 |
| C-R32/17.5 | 32 | 17.5 | 360 | 280 | 3.4 |
Mata Drill | |||
| Momo | Dia waho. | Taumaha | Awhe Taupānga (He Tohutohu) |
| (mm) | (Kg) | ||
| Maka moka ripeka | 51 mm | 0.99 | Makahia he moka whiti mo te kirikiri me te kirikiri |
| moka ripeka maitai | 51 mm | 0.88 | Moka rino whakapakeke mo nga ahuatanga whenua mahorahora ki te reo mato |
| 76 mm | 2.87 | ||
| Te maitai 3 moka tapahi | 76 mm | 2.65 | |
| TC ripeka bit | 51 mm | 0.99 | Moka whakauru TC mo nga hanganga toka ngawari ki waenga |
| TC 3 moka tapahi | 76 mm | 2.87 | |
| Paraka kikorangi rino | 51 mm | 0.99 | Moka kikorangi kua whakapakeketia mo te hangahanga papai mo te oneone kore whakakoi me nga toka iti |
| TC moka kikorangi | 51 mm | 0.99 | Moka kikorangi TC mo te hangahanga arotau mo nga hanganga toka ngawari ki te reo |
| Paraka patene maitai | 51 mm | 1.32 | Moka patene whakapakeke mo te toka kore whakakotahi me nga toka |
| moka pātene TC | 51 mm | 1.43 | TC insert bit button bit for medium rock formation |
| moka EX | 51 mm | 0.88 | Moka poro tapatapahi kua whakapakeketia, e tika ana mo te nuinga o nga tono tae atu ki nga roopu whaiti o te toka ngohengohe. |
| EXX bit(he rereke) | 51 mm | 1.1 | Ko te EXX te moka pukoro tino uaua e waatea ana, mo te toka kaha, mo nga tuitui maro me nga turanga raima. |
Kaihonohono | ||||
| Rahi | Dia waho. | Te roa | Taumaha | Tuhipoka |
| (mm) | (mm) | (Kg/pc) | ||
| SSR32 | 42 | 145 | 0.79 | Me te hanganga hiri |
| 42 | 160 | 0.86 | ||
| 42 | 190 | 1 | ||
| SER32 | 42 | 145 | 0.77 | Kaore he hanganga hiri |
| 42 | 160 | 0.84 | ||
| 42 | 190 | 1 | ||
Nati Hex | ||||
| Rahi | Rahi Kī | Te roa | Taumaha | Te pakeke |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| SSR32 | 46 | 45 | 0.37 | 25-30 |
| 46 | 55 | 0.46 | ||
| 46 | 60 | 0.47 | ||
Pereti Domed | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| R32-E | 150×150 | 8 | 35 | 1.3 |
| 150×150 | 5 | 35 | 0.85 | |
| 150×150 | 6 | 35 | 1 | |
| 150×150 | 10 | 35 | 1.7 | |
| 175×175 | 8 | 35 | 1.9 | |
| 200×200 | 8 | 35 | 2.6 | |
| 200×200 | 10 | 35 | 3.52 | |
| 200×200 | 12 | 35 | 2.94 | |
Pereti punga | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R32 | 95×95 | 25 | 35 | 1.6 |
| 120×120 | 30 | 35 | 3.2 | |
| 150×150 | 8 | 35 | 1.3 | |
| 200×200 | 10 | 35 | 3.06 | |
R38 Punga Keri Whaiaro
Pae Punga Hollow | |||||
| Rahi | Dia waho. | Roto Dia. | Uta Mutunga | Tukua Uta | Taumaha |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R38/20 | 38 | 20 | 500 | 400 | 5.5 |
| E-R38/22 | 38 | 22 | 500 | 400 | 4.95 |
| E-R38/18 | 38 | 18 | 550 | 430 | 6 |
| C-R38/22.5 | 38 | 22.5 | 500 | 400 | 4.8 |
| C-R38/21 | 38 | 21 | 500 | 400 | 5.25 |
Mata Drill | |||
| Momo | Dia waho. | Taumaha | Awhe Taupānga (He Tohutohu) |
| (mm) | (Kg) | ||
| moka ripeka maitai | 76 mm | 1.2 | Moka ripeka kua whakapakeketia mo nga ahuatanga mahorahora ki te reo matotahi me nga toka iti |
| 90 mm | 1.4 | ||
| Paraka kikorangi rino | 76 mm | 1.2 | Moka kikorangi kua whakapakeketia mo te hangahanga papai mo te oneone kore whakakoi me nga toka iti |
| TC moka kikorangi | 115 mm | 2.85 | Moka kikorangi TC mo te hangahanga arotau mo nga hanganga toka ngawari ki te reo |
| TC ripeka bit | 76 mm | 1.25 | TC moka whiti mo nga hanganga toka ngawari ki waenga |
| 90 mm | 1.45 | ||
| TC 3 moka tapahi | 76 mm | 0.85 | Moka whakauru TC mo nga hanganga toka ngawari ki waenga |
| Paraka patene maitai | 76 mm | 1 | Moka patene whakapakeke mo te toka kore whakakotahi me nga toka |
| moka pātene TC | 76 mm | 1 | TC insert bit button bit for medium rock formations |
Kaihonohono | ||||
| Rahi | Dia waho. | Te roa | Taumaha | Tuhipoka |
| (mm) | (mm) | (Kg/pc) | ||
| S-R38 | 51 | 180 | 1.33 | Me te hanganga hiri |
| 51 | 200 | 1.5 | ||
| 51 | 220 | 1.67 | ||
| E-R38 | 51 | 180 | 1.38 | Kaore he hanganga hiri |
| 51 | 200 | 1.55 | ||
| 51 | 220 | 1.68 | ||
Nati Hex | ||||
| Rahi | Rahi Kī | Te roa | Taumaha | Te pakeke |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-R38 | 50 | 60 | 1.47 | 25-30 |
Pereti Domed | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R38 | 150×150 | 8 | 41 | 3.6 |
| 200×200 | 12 | 41 | 1.38 | |
Pereti punga | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R38 | 140×140 | 35 | 41 | 5 |
| 150×150 | 25 | 41 | 4.1 | |
| 200×200 | 12 | 41 | 3.67 | |
R51 Punga Keri Whaiaro
Pae Punga Hollow | |||||
| Rahi | Dia waho. | Roto Dia. | Uta Mutunga | Tukua Uta | Taumaha |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R51/34 | 51 | 34 | 580 | 450 | 6.95 |
| S-R51/29 | 51 | 29 | 800 | 630 | 9 |
| E-R51/36 | 51 | 36 | 550 | 430 | 6.15 |
| E-R51/35 | 51 | 35 | 580 | 450 | 6.4 |
| E-R51/31 | 51 | 31 | 800 | 630 | 8.2 |
| C-R51/33 | 51 | 33 | 800 | 630 | 8 |
Mata Drill | |||
| Momo | Dia waho. | Taumaha | Awhe Taupānga (He Tohutohu) |
| (mm) | (Kg) | ||
| moka ripeka maitai | 85 mm | 1.3 | Moka ripeka kua whakapakeketia mo nga ahuatanga mahorahora ki te reo matotahi me nga toka iti |
| TC ripeka bit | 115 mm | 1.8 | TC moka whiti mo nga hanganga toka ngawari ki waenga |
| Paraka patene maitai | 100 mm | 1.85 | TC whakauru moka patene mo te toka kore whakakotahi me nga toka |
| 115 mm | 2 | ||
| moka pātene TC | 100 mm | 1.85 | TC insert bit button bit for medium rock formations |
Kaihonohono | ||||
| Rahi | Dia waho. | Te roa | Taumaha | Tuhipoka |
| (mm) | (mm) | (Kg/pc) | ||
| S-R51 | 63 | 200 | 1.85 | Me te hanganga hiri |
| 63 | 220 | 2 | ||
| E-R51 | 63 | 200 | 1.84 | Kaore he hanganga hiri |
| 63 | 220 | 2.13 | ||
Nati Hex | ||||
| Rahi | Rahi Kī | Te roa | Taumaha | Te pakeke |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-R51 | 75 | 70 | 1.53 | 25-30 |
| 75 | 80 | 1.84 | ||
Pereti Domed | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R38 | 200×200 | 15 | 55 | 4.7 |
Pereti punga | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R51 | 150×150 | 40 | 56 | 6.2 |
| 180×180 | 45 | 56 | 10.5 | |
| 200×200 | 30 | 60 | 8.72 | |
| 250×250 | 40 | 60 | 18.9 | |
T30 Punga Keri Whaiaro
Pae Punga Hollow | |||||
| Rahi | Dia waho. | Roto Dia. | Uta Mutunga | Tukua Uta | Taumaha |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T30/16 | 30 | 16 | 220 | 180 | 2.9 |
| S-T30/14 | 30 | 14 | 260 | 220 | 3.35 |
| S-T30/11 | 30 | 11 | 320 | 260 | 3.6 |
| E-T30/14 | 30 | 14 | 320 | 260 | 3.35 |
Mata Drill | |||
| Momo | Dia waho. | Taumaha | Awhe Taupānga (He Tohutohu) |
| (mm) | (Kg) | ||
| Moka ripeka whakapakeke | 42mm | 0.30kg | Moka whiti kua whakapakeketia mo nga ahuatanga o te whenua maataa ki te ahua o te whenua |
| 46mm | 0.32kg | ||
| 51mm | 0.40kg | ||
| 76mm | 0.56kg | ||
| TC ripeka bit | 42mm | 0.30kg | TC moka whiti mo nga hanganga toka ngawari ki waenga |
| 46mm | 0.32kg | ||
| 51mm | 0.40kg | ||
| Moka patene whakapakeke | 42mm | 0.30kg | Moka patene whakapakeke mo te toka kore whakakotahi me nga toka |
| 46mm | 0.32kg | ||
| 51mm | 0.40kg | ||
| moka pātene TC | 46mm | 0.45kg | Moka patene TC mo nga hanganga toka waenga |
| 51mm | 0.69kg | ||
Kaihonohono | ||||
| Rahi | Dia waho. | Te roa | Taumaha | Tuhipoka |
| (mm) | (mm) | (Kg/pc) | ||
| S-T30 | 38 | 105 | 0.39 | Me te hanganga hiri |
| E-T30 | 38 | 105 | 0.45 | Kaore he hanganga hiri |
Nati Hex | ||||
| Rahi | Rahi Kī | Te roa | Taumaha | Te pakeke |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T30 | 46 | 35 | 0.31 | 25-30 |
Nati Kara Porohita | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T30 | 46 | 35 | 0.33 | 290-340 |
Pereti punga | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T30 | 150×150 | 25 | 40 | 4.2 |
| 200×200 | 8 | 36 | 2.43 | |
T40 Punga Keri Whaiaro
Pae Punga Hollow | |||||
| Rahi | Dia waho. | Roto Dia. | Uta Mutunga | Tukua Uta | Taumaha |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T40/20 | 40 | 20 | 539 | 430 | 6.2 |
| S-T40/16 | 40 | 16 | 660 | 525 | 7.2 |
| E-T40/22 | 40 | 22 | 539 | 430 | 5.7 |
| E-T40/18 | 40 | 18 | 660 | 525 | 6.8 |
Mata Drill | |||
| Momo | Dia waho. | Taumaha | Awhe Taupānga (He Tohutohu) |
| (mm) | (Kg) | ||
| Moka ripeka whakapakeke | 76mm | 0.90kg | Moka whiti kua whakapakeketia mo nga ahuatanga o te whenua maataa ki te ahua o te whenua |
| 90mm | 1.5kg | ||
| 100mm | 1.65kg | ||
| 115mm | 2.6kg | ||
| TC ripeka bit | 76mm | 1.2kg | TC moka whiti mo nga hanganga toka ngawari ki waenga |
| 90mm | 1.75kg | ||
| 100mm | 2kg | ||
| 115mm | 2.8kg | ||
| 130mm | 3.1kg | ||
| 150mm | 5kg | ||
| Moka ripeka whakapakeke | 76mm | 1.15kg | Moka patene whakapakeke mo te toka kore whakakotahi me nga toka |
| 90mm | 1.68kg | ||
| 100mm | 2.15kg | ||
| 115mm | 2.3kg | ||
| 130mm | 3.15kg | ||
| moka pātene TC | 76mm | 1.78kg | Moka patene TC mo nga hanganga toka waenga |
| 90mm | 1.4kg | ||
| 100mm | 2kg | ||
| 115mm | 2.8kg | ||
| 130mm | 4.92kg | ||
Kaihonohono | ||||
| Rahi | Dia waho. | Te roa | Taumaha | Tuhipoka |
| (mm) | (mm) | (Kg/pc) | ||
| S-T40 | 54 | 140 | 1.09 | Me te hanganga hiri |
| 57 | 140 | 1.37 | ||
| E-T40 | 54 | 140 | 1.11 | Kaore he hanganga hiri |
| 57 | 140 | 1.39 | ||
Nati Hex | ||||
| Rahi | Rahi Kī | Te roa | Taumaha | Te pakeke |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T40 | 65 | 50 | 0.92 | 25-30 |
Nati Kara Porohita | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T40 | 65 | 50 | 0.86 | 290-340 |
Pereti punga | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T40 | 115×115 | 20 | 56 | 1.6 |
| 125×125 | 24 | 56 | 2.4 | |
| 200×200 | 12 | 56 | 3.28 | |
| 200×200 | 30 | 56 | 8.5 | |
T52 Punga Keri Whaiaro
Pae Punga Hollow | |||||
| Rahi | Dia waho. | Roto Dia. | Uta Mutunga | Tukua Uta | Taumaha |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T52/24 | 52 | 24 | 929 | 730 | 10.2 |
| S-T52/26 | 52 | 26 | 929 | 730 | 9.7 |
Kaihonohono | ||||
| Rahi | Dia waho. | Te roa | Taumaha | Tuhipoka |
| (mm) | (mm) | (Kg/pc) | ||
| S-T52 | 70 | 160 | 2.31 | Me te hanganga hiri |
| E-T52 | 70 | 160 | 2.46 | Kaore he hanganga hiri |
Nati Hex | ||||
| Rahi | Rahi Kī | Te roa | Taumaha | Te pakeke |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T52 | 80 | 70 | 1.94 | 25-30 |
Nati Kara Porohita | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T52 | 80 | 70 | 2.3 | 290-340 |
Pereti punga | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| SST52 | 145×145 | 27 | 65 | 3.6 |
| 200×200 | 30 | 65 | 8.59 | |
| 220×220 | 35 | 65 | 13.1 | |
T76 Punga Keri Whaiaro
Pae Punga Hollow | |||||
| Rahi | Dia waho. | Roto Dia. | Uta Mutunga | Tukua Uta | Taumaha |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| E-T76/51 | 76 | 51 | 1600 | 1200 | 16.5 |
| E-T76/45 | 76 | 45 | 1900 | 1500 | 19.7 |
Kaihonohono | ||||
| Rahi | Dia waho. | Te roa | Taumaha | Tuhipoka |
| (mm) | (mm) | (Kg/pc) | ||
| S-T76 | 95 | 200 | 4.26 | Me te hanganga hiri |
| 95 | 220 | 4.8 | ||
Nati Hex | ||||
| Rahi | Rahi Kī | Te roa | Taumaha | Te pakeke |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T76 | 100 | 75 | 2.4 | 25-30 |
| 100 | 80 | 2.67 | ||
Nati Kara Porohita | |||
| Rahi | Rahi Kī | Te roa | Taumaha |
| (mm) | (mm) | (Kg/pc) | |
| E-T76 | 95 | 70 | 1.9 |
Pereti punga | ||||
| Rahi | Ahu | Te matotoru | Kohao Dia. | Taumaha |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T76 | 250×250 | 60 | 80 | 27 |
| 250×250 | 40 | 80 | 18 | |
