scamnum EXERCITATIO

Description:

Scamnum et fabricatio instrumenta exercendis includunt virgas, scapus adaptatores, juncturas et frena.Stamina maxime habemus IX: R3212, R32, HL38, T38, T45, T51, T60, ST58 et ST68.Adhiberi possunt cum frenis globulis, cruxibus et productis relegatis.Sanshan EXERCITATIO comprehensivorum scamni et productionis petrarum exercendis instrumenta omnia includit a 1" funiculi instrumento filo usque ad T60 apparatum filo, Multi clientes dicunt virgas terebras, fistulas et frena globulorum optima in marre...


Product Detail

R32

T35

R38

T38

T45

T51

ST58

GT60

ST68

Product Tags

Scamnum et fabricatio instrumenta exercendis includunt virgas, scapus adaptatores, juncturas et frena.Stamina maxime habemus IX:R3212, R32;HL38, T38, T45, T51, T60;ST58etST68.Non possunt esse cumbutton bits, crucis frena et producta reaming.

Sanshan EXERCITATIO comprehensiva scamni et productionis instrumentorum petrarum exercendorum omnia includit ab 1" instrumento stamina fune usque ad T60 apparatum filorum, Multi clientes dicunt virgas terebras, fistulas etbutton frenums optima sunt hodie in foro.Nunc dicamus eos productivitatem aliquantum emendare.

scamnum EXERCITATIO-R32
 r32
scamnum EXERCITATIO-T35
 t35
scamnum EXERCITATIO-R38
 r38
scamnum EXERCITATIO T38
 t38
scamnum drilling-T45
 t45
scamnum drilling-T51
 t51
scamnum drilling-ST58
 st58
scamnum EXERCITATIO GT60
gt60

R25 (1), R28 (1 1/8"), R32 (1 1/4"), R/T38 (1 1/2"), T45 (1 3/4"), T51 (2"). T60 (2 3/8").
Drill frenum R/T38, Extensio virgae T38 - Hex.32 mm - T38, Extensio virgae T38 - Round 38 mm - T38 (Speedrod), Extensio virgae R38 - Rotunda 38 mm - R38;
Extensio virgae T38 - Rotundus 38 mm - T38, Extensio virgae T38 - Rotundus 38 mm - T38 (cum duplici filo) Virga T38 - Circulus 45 mm - T38 (Speedrod);
Guide tubeT38,Copulatio R/T 38.reaming partemGubernator adptor;

Descriptio:extensio virga, alia nomina sunt Extensio ferrum terebra, Extensio virgae terebrae, Extensio chalybs, M/F virga ( Speedrod ) ,

 


  • Previous:
  • Deinde:

  • tr32

    Button bit Carbide dimensio Dimensiones D Flushinga foraminis
    Cange Front
    [No.] [mm] [No.] [mm] [mm] [in] Front Latus
     r32-button frenum-7 5 9 2 9 41 1 5/8″ 1 1
    5 9.5 2 8 43 1 11/16″ 1 1
    5 9.5 2 9 43 1 11/16″ 1 1
    5 10 2 9 45 1 3/4″ 1 1
    5 11 2 9 48 1 7/8″ 1 2
    5 11 2 10 51 2″ 1 1
     r32-button frenum-8 6 8 2 8 41 1 5/8″ 2 0
    6 8 2 8 41 1 5/8″ 2 1
    6 8 2 8 43 1 11/16″ 2 0
    6 9 2 9 45 1 3/4″ 2 0
    6 9.5 2 9.5 48 1 7/8″ 2 0
    6 11 2 9 51 2″ 2 0
     r32-button frenum-9 6 9 3 7 43 1 11/16″ 3 1
    6 9 3 8 45 1 3/4″ 3 1
    6 10 3 8 45 1 3/4″ 3 1
    6 9 3 9 48 1 7/8″ 3 1
    6 10 3 8 48 1 7/8″ 3 1
    6 11 3 9 51 2″ 3 1
    6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
     r32-button bit-9-2 6 10 3 8 43 1 11/16″ 3 1
    6 9 3 7 43 1 11/16″ 3 1
    6 10 3 8 45 1 3/4″ 3 1
    6 10 3 8 48 1 7/8″ 3 1
    Flat Face / Retrac
     r32-button frenum-flatface-9 6 9 3 9 48 1 7/8″ 3 1
    6 10 3 9.5 51 2″ 3 1
    6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
    scamnum EXERCITATIO
    Face plana
     r32-scamnum-flatface 8 11 6 11 76 3″ 2 0
    8 10 4 10 64 2 1/2″ 2 0
    Iacta Center
     r32-scamnum-dropcenter-10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
    Iacta Center
     r32-scamnum-dropcenter-11 6 14 3/1 12.7/9.5 89 3 1/2″ 3 0
    6 14 3/1 12.7/9.5 89 3 1/2″ 3 0
    Flat Face / Retrac
     r32-scamnum-flatface-retrac-12 8 10 4 10 64 2 1/2″ 2 0
    Flat Face / Retrac
     r32-scamnum-flatface-retrac-14 8 11 6 11 76 3″ 2 0
    Iacta Center / Retrac
     r32-scamnum-dropcenter-retrac-11 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 12.7 3/1 10 / 9.5 76 3″ 3 0
    Iacta Center / Retrac
     r32-scamnum-dropcenter-retrac-14 8 11 4/2 11/9.5 89 3 1/2″ 4 1
    8 11 4/2 11/9.5 89 3 1/2″ 4 1

     

    R32 Cross bit Carbide dimensio Dimensiones D Flushinga foraminis
    Latitudo Altitudo
    [mm] [mm] [mm] [in] Front Latus
     r32-crucis-bit 11.5 19 41 1 5/8″ 1 4
    9.5 19 43 1 11/16″ 1 4
    11.5 19 45 1 3/4″ 1 4
    9.5 19 48 1 7/8″ 1 4
    9.5 19 51 2″ 1 4
    9.5 19 57 2 1/4″ 1 4

     

     

    R32 – R32 – Rd 32 1-1/4″ STABULUM (32mm) Carburized
     r32drillrod D TANDEM (L.) FILUM
    mm FT Lifit ius
    RD 32 610 2′ R32 R32
    RD 32 915 3′ R32 R32
    RD 32 1000 3′ 3″ R32 R32
    RD 32 1220 4′ R32 R32
    RD 32 1525 5′ R32 R32
    RD 32 1830 6′ R32 R32
    RD 32 2000 6′ 7″ R32 R32
    RD 32 2435 8′ R32 R32
    RD 32 3000 9′ 10″ R32 R32
    RD 32 3050 10′ R32 R32
    RD 32 3660 12′ R32 R32
    RD 32 4265 14′ R32 R32
    RD 32 4915 16′ 1-1/2″ R32 R32
    RD 32 5490 18′ R32 R32
    MF-Rod R32 - R32 - Rd 32 1-1/4″ ROPE FILUM (32mm) Carburized
     r32drillrod-mf * D TANDEM (L.) FILUM
    mm FT Lifit ius
    RD 32 915 3′ R32F R32
    RD 32 1000 3′ 3″ R32F R32
    RD 32 1220 4′ R32F R32
    RD 32 1525 5′ R32F R32
    RD 32 1830 6′ R32F R32
    RD 32 2435 8′ R32F R32
    RD 32 2700 8′ 10″ R32F R32
    RD 32 2850 9′ 4″ R32F R32
    RD 32 3000 9′ 10″ R32F R32
    RD 32 3050 10′ R32F R32
    RD 32 3660 12′ R32F R32
    RD 32 4000 13′ 1-1/2″ R32F R32
    RD 32 4270 14′ R32F R32
    RD 32 5370 17′ 7-1/2″ R32F R32
    RD 32 6300 20′ 8″ R32F R32

    t35

    Button bit Carbide dimensio Dimensiones D Flushinga foraminis
    Cange Front
    [No.] [mm] [No.] [mm] [mm] [in] Front Latus
     buttonbit-flatface 6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
    Flat Face / Retrac
     buttonbit-flatface-retrac 6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1

     

    MF-Rod T35 - T35 - Rd 39 1-3/8″ TRAPEZOIDAL FILUM (35mm) Carburized
     t35mfrod D TANDEM (L.) FILUM
    mm FT Lifit ius
    48 1220 4′ T35 T35
    48 1830 6′ T35 T35
    48 2435 8′ T35 T35
    48 3050 10′ T35 T35
    48 3660 12′ T35 T35
    48 4270 14′ T35 T35

    r38

    Button bit Carbide dimensio Dimensiones D Flushinga foraminis
    Cange Front
    [No.] [mm] [No.] [mm] [mm] [in] Front Latus
     button-r38-f12 8 10 4 10 64 2 1/2″ 2 0
     button-r38-f14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    Iacta Center
     buttonbit-r38-d10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11/9.5 70 2 3/4″ 3 0
    6 11 3/1 11/9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
     buttonbit-r38-d11 6 14 3/2 12.7/9.5 89 3 1/2″ 3 0
    6 14 3/2 12.7/9.5 89 3 1/2″ 3 0

     

    R38 crucis frenum Carbide dimensio Dimensiones D Flushinga foraminis
    Latitudo Altitudo
    [mm] [mm] [mm] [in] Front Latus
     crossbit-r38 12 20.6 64 2 1/2″ 1 4
    12.7 25 70 2 3/4″ 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    R38 – R38 – Rd 39 1-1/2″ ROPE LICIUM (38mm) Carburized
     r38drillrods D TANDEM (L.) FILUM
    mm FT Lifit ius
    RD 39 915 3′ R38 R38
    RD 39 1000 3′ 3″ R38 R38
    RD 39 1220 4′ R38 R38
    RD 39 1500 4′ 11″ R38 R38
    RD 39 1830 6′ R38 R38
    RD 39 2000 6′ 7″ R38 R38
    RD 39 2435 8′ R38 R38
    RD 39 3050 10′ R38 R38
    RD 39 3660 12′ R38 R38
    RD 39 4000 14′ R38 R38
    MF-Rod R38 - R38 - Rd 39 1-1/2″ TRAPEZOIDAL FILUM (38mm) Carburized
     r38mfrod D TANDEM (L.) FILUM
    mm FT Lifit ius
    56 1220 4′ R38F R38
    56 1525 5′ R38F R38
    56 1830 6′ R38F R38
    56 2000 6′ 7″ R38F R38
    56 3050 10′ R38F R38
    56 3660 12′ R38F R38
    56 4265 14′ R38F R38

    t38

    Button bit Carbide dimensio Dimensiones D Flushinga foraminis
    Cange Front
    [No.] [mm] [No.] [mm] [mm] [in] Front Latus
     buttonbit-t38-f9 6 10 3 10 57 2 1/4″ 3 1
    6 11 3 11 64 2 1/2″ 3 1
     buttonbit-t38-f9-2 6 11 3 9.5 57 2 1/4″ 1 2
    6 12.7 3 11 64 2 1/2″ 1 2
     buttonbit-t38-f10 6 12.7 3 12.7 76 3″ 3 1
    6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t38-f11 6 12.7 5 11 70 2 3/4″ 1 2
    6 12.7 5 11 76 3″ 1 2
     buttonbit-t38-f12 8 10 4 10 64 2 1/2″ 2 0
    8 10 4 10 70 2 3/4″ 2 0
     buttonbit-t38-f13 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t38-f17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
    Iacta Center
     buttonbit-t38-d10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11/9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
     buttonbit-t38-d11 6 14 3/2 12.7/9.5 89 3 1/2″ 3 0
     buttonbit-t38-d13 8 11 4/1 10/10 76 3″ 4 0
     buttonbit-t38-d14 8 11 4/2 11/9.5 89 3 1/2″ 4 0
     buttonbit-t38-d15 8 14 4/3 12.7/11 102 4″ 4 0
    Flat Face / Retrac
     buttonbit-t38-fr9 6 11 3 9.5 57 2 1/4″ 1 2
    6 12.7 3 11 64 2 1/2″ 1 2
     buttonbit-t38-fr9-2 6 12.7 3 11 64 2 1/2″ 3 0
    6 12.7 3 12.7 76 3″ 3 1
    buttonbit-t38-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t38-fr12 8 10 4 10 64 2 1/2″ 2 0
     buttonbit-t38-fr13 8 12.7 5 10 76 3″ 4 0
     buttonbit-t38-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 1
    Iacta Center / Retrac
     buttonbit-t38-dr10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11/9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
     buttonbit-t38-dr11 6 14 3/2 12.7/9.5 89 3 1/2″ 3 0
     buttonbit-t38-dr13 8 11 4/1 10/10 76 3″ 4 0
     buttonbit-t38-dr14 8 11 4/2 11/9.5 89 3 1/2″ 4 1
     buttonbit-t38-dr15 8 14 4/3 12.7/11 102 4″ 4 1

     

    T38 Cross bit Carbide dimensio Dimensiones D Flushinga foraminis
    Latitudo Altitudo
    [mm] [mm] [mm] [in] Front Latus
     crossbit-t38 12.7 20.6 64 2 1/2″ 1 4
    12.7 25 70 2 3/4″ 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    T38 - T38 - Rd 39 1-1/2″ TRAPEZOIDAL FILUM (38mm) Carburized
     t38drillrod D TANDEM (L.) FILUM
    mm FT Lifit ius
    RD 39 1000 3′ 3″ T38 T38
    RD 39 1220 4′ T38 T38
    RD 39 1500 4′ 11″ T38 T38
    RD 39 1525 5′ T38 T38
    RD 39 1830 6′ T38 T38
    RD 39 2000 6′ 7″ T38 T38
    RD 39 2435 8′ T38 T38
    RD 39 3000 9′ 10″ T38 T38
    RD 39 3050 10′ T38 T38
    RD 39 3660 12′ T38 T38
    RD 39 4000 13′ 1-1/2″ T38 T38
    RD 39 4265 14′ T38 T38
    TANDEM FILUM T38 - T38 - Rd 39 1-1/2″ TRAPEZOIDALE FILUM (38mm) Carburized
     t38drillrod-tandem-therad D TANDEM (L.) FILUM
    mm FT Lifit ius
    RD 39 3050 10′ T38/T38 T38/T38
    RD 39 3660 12′ T38/T38 T38/T38
    RD 39 4265 14′ T38/T38 T38/T38
    MF-Rod T38 - T38 - Rd 39 1-1/2″ TRAPEZOIDAL FILUM (38mm) Carburized
     t38mfrod D TANDEM (L.) FILUM
    mm FT Lifit ius
    56 915 3′ T38F T38
    56 1000 3′ 3″ T38F T38
    56 1220 4′ T38F T38
    56 1525 5′ T38F T38
    56 1830 6′ T38F T38
    56 2000 6′ 7″ T38F T38
    56 2435 8′ T38F T38
    56 3000 9′ 10″ T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38
    56 4270 14′ T38F T38
    MF-Tube T38 - T38 - Rd 56 1-1/2″ TRAPEZOIDAL FILUM (38mm) X 2-7/32″ CIRCUM (56mm) Carburized
     t38mftube D TANDEM (L.) FILUM
    mm FT Lifit ius
    56 1220 4′ T38F T38
    56 1525 5′ T38F T38
    56 1830 6′ T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38

    t45

    Button bit Carbide dimensio Dimensiones D Flushinga foraminis
    Cange Front
    [No.] [mm] [No.] [mm] [mm] [in] Front Latus
     buttonbit-t45-9 6 12.7 3 12.7 76 3″ 3 1
     buttonbit-t45-10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t45-13 8 12.7 5 10 76 3″ 4 0
     buttonbit-t45-14 8 14 6 12.7 102 4″ 4 2
     buttonbit-t45-14-2 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t45-16 8 16 8 14 127 5″ 2 0
    8 16 8 16 152 6″ 2 0
     buttonbit-t45-17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t45-18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
    Iacta Center
     buttonbit-t45-d11 6 14 3/2 12.7/9.5 89 3 1/2″ 3 0
     buttonbit-t45-d13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t45-d14 8 11 4/2 11/9.5 83 3 1/4″ 4 1
    8 11 4/2 11/9.5 89 3 1/2″ 4 1
     buttonbit-t45-d15 8 14 4/3 12.7/11 102 4″ 4 0
    8 14 4/3 14/11 115 4 1/2″ 4 0
    Flat Face / Retrac
     buttonbit-t45-fr9 6 12.7 3 12.7 76 3″ 3 1
     buttonbit-t45-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t45-fr13 8 12.7 5 10 76 3″ 4 0
    8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t45-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t45-fr16 8 16 8 14 127 5″ 2 0
    Iacta Center / Retrac
     buttonbit-t45-dr10 6 11 3/1 11/9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
     buttonbit-t45-dr11 6 14 3/2 12.7/9.5 89 3 1/2″ 3 0
     buttonbit-t45-dr13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t45-dr14 8 11 4/2 11/9.5 89 3 1/2″ 4 1
     buttonbit-t45-dr15 8 14 4/3 12.7/11 102 4″ 4 1
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 2

     

    T45 Cross bit Carbide dimensio Dimensiones D Flushinga foraminis
    Latitudo Altitudo
    [mm] [mm] [mm] [in] Front Latus
     crossbit-t45 12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    T45 - T45 - Rd 46 1-3/4″ TRAPEZOIDAL FILUM (45mm) Carburized
     t45drillrod D TANDEM (L.) FILUM
    mm FT Lifit ius
    RD 46 1000 3′ 3″ T45 T45
    RD 46 1220 4′ T45 T45
    RD 46 1500 4′ 11″ T45 T45
    RD 46 1525 5′ T45 T45
    RD 46 1830 6′ T45 T45
    RD 46 2000 6′ 7″ T45 T45
    RD 46 2435 8′ T45 T45
    RD 46 3000 9′ 10″ T45 T45
    RD 46 3050 10′ T45 T45
    RD 46 3660 12′ T45 T45
    RD 46 4265 14′ T45 T45
    RD 46 4875 16′ T45 T45
    RD 46 5490 18′ T45 T45
    RD 46 6095 20′ T45 T45
    TANDEM FILUM T45 - T45 - Rd 46 1-3/4″ TRAPEZOIDALE FILUM (45mm) Carburized
     t45drillrod-tandem-fila D TANDEM (L.) FILUM
    mm FT Lifit ius
    RD 39 3050 10′ T45/T45 T45/T45
    RD 39 3660 12′ T45/T45 T45/T45
    RD 39 4265 14′ T45/T45 T45/T45
    MF-Rod T45 - T45 - Rd 46 1-3/4″ TRAPEZOIDAL FILUM (45mm) Carburized
     t45mfrod D TANDEM (L.) FILUM
    mm FT Lifit ius
    64 1000 3′ 3″ T45F T45
    64 1220 4′ T45F T45
    64 1500 4′ 11″ T45F T45
    64 1525 5′ T45F T45
    64 1830 6′ T45F T45
    64 2000 6′ 7″ T45F T45
    64 2435 8′ T45F T45
    64 3000 9′ 10″ T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    64 4880 16′ T45F T45
    64 5490 18′ T45F T45
    64 6100 20′ T45F T45
    MF-TUBE T45 - T45 - Rd 64 1-3/4″ TRAPEZOIDALE FILUM (45mm) X 2-1/2″ CIRCUM (64mm) Carburized
     t45mftube D TANDEM (L.) FILUM
    mm FT Lifit ius
    64 1220 4′ T45F T45
    64 1525 5′ T45F T45
    64 1830 6′ T45F T45
    64 2440 8′ T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    MF-TUBE T45 - T45 - Rd 76 1-3/4″ TRAPEZOIDALE FILUM (45mm) X 2-1/2″ CIRCUM (64mm) Carburized
     t45mftube D TANDEM (L.) FILUM
    mm FT Lifit ius
    76 1220 4′ T45F T45
    76 1525 5′ T45F T45
    76 1830 6′ T45F T45
    76 2440 8′ T45F T45
    76 3050 10′ T45F T45
    76 3660 12′ T45F T45

    t51

    Button bit Carbide dimensio Dimensiones D Flushinga foraminis
    Cange Front
    [No.] [mm] [No.] [mm] [mm] [in] Front Latus
     buttonbit-t51-f10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t51-f14 8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 11 85 3 3/8″ 2 1
    8 12.7 6 11 85 3 3/8″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 2
    8 14 6 14 102 4″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t51-f16 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2″ 2 0
     buttonbit-t51-f13 8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t51-f14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-t51-f15 8 14 7 14 115 4 1/2″ 4 2
    8 16 7 14 121 4 3/4″ 4 2
     buttonbit-t51-f16 8 16 8 14 127 5″ 4 2
     buttonbit-t51-f16-2 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2″ 2 0
     buttonbit-t51-f17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t51-fr18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-t51-f19 10 14 9 12.7 115 4 1/2″ 5 0
    10 16 7 16 127 5″ 5 0
    10 16 8 16 140 5 1/2″ 5 0
    Iacta Center
     buttonbit-t51-d11 6 12.7 3/2 11/9.5 80 3 1/8″ 3 0
    6 14 3/2 12.7/9.5 89 3 1/2″ 3 0
     buttonbit-t51-d13 8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t51-d14 8 11 4/2 11/9.5 89 3 1/2″ 4 0
     buttonbit-t51-d15 8 14 4/3 12.7/11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 0
     buttonbit-t51-d16 8 16 4/4 16/14 140 5 1/2″ 4 0
     buttonbit-t51-d18 10 14 5/3 12.7 / 12.7 115 4 1/2″ 5 0
    10 16 5/3 16 / 12.7 127 5″ 5 0
    10 16 5/3 16/14 140 5 1/2″ 5 0
    Flat Face / Retrac
     buttonbit-t51-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t51-fr14 8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t51-fr16 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2″ 2 0
     buttonbit-t51-fr17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t51-fr18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-t51-fr13 8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t51-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-t51-fr15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-t51-fr16 8 16 8 14 127 5″ 4 2
    8 14 8 14 127 5″ 4 2
    Iacta Center / Retrac
     buttonbit-t51-dr11 6 14 3/2 12.7/9.5 89 3 1/2″ 3 0
     buttonbit-t51-dr13 8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t51-dr14 8 11 4/2 11/9.5 89 3 1/2″ 4 1
    8 12.7 4/2 11/9.5 89 3 1/2″ 4 1
    8 12.7 4/2 12.7/9.5 93 3 11/16″ 4 0
     buttonbit-t51-dr15 8 14 4/3 12.7/11 102 4″ 4 1
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 0
     buttonbit-t51-dr16 8 16 4/4 16/14 140 5 1/2″ 4 0

    st58

    Button bit Carbide dimensio Dimensiones D Flushinga foraminis
    Cange Front
    [No.] [mm] [No.] [mm] [mm] [in] Front Latus
    Flat Face / Retrac
     buttonbit-st58-fr17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 11 93 3 11/16″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
    Iacta Center / Retrac
     buttonbit-st58-dr14 8 11 4/2 11/9.5 89 3 1/2″ 4 1
    8 12.7 4/2 12.7/9.5 93 3 11/16″ 4 0
     buttonbit-st58-dr15 8 14 4/3 12.7/11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 0

     

    MF-Rod ST58 – ST58 – Rd 60 2-1/4″ TRAPEZOIDAL FILUM (58mm) Carburized
     st58mfrod D TANDEM (L.) FILUM
    mm FT Lifit ius
    81 3660 12′ ST58F ST58
    81 4270 14′ ST58F ST58
    81 5490 18′ ST58F ST58
    81 6100 20′ ST58F ST58
    MF-TUBE ST58 – ST58 – Rd 76 2-1/4″ TRAPEZOIDALE FILUM (58mm) X 3″ CIRCUM (76mm) Carburized
     st58mftube D TANDEM (L.) FILUM
    mm FT Lifit ius
    76 1220 4′ ST58F ST58
    76 1525 5′ ST58F ST58
    76 1830 6′ ST58F ST58
    76 2440 8′ ST58F ST58
    76 3050 10′ ST58F ST58
    76 3660 12′ ST58F ST58
    76 4270 14′ ST58F ST58
    76 5200 17 3/4″ ST58F ST58

    gt60

    Button bit Carbide dimensio Dimensiones D Flushinga foraminis
    Cange Front
    [No.] [mm] [No.] [mm] [mm] [in] Front Latus
     buttonbit-gt60-f14 8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
     buttonbit-gt60-f14-2 8 14 6 12.7 102 4″ 4 2
    8 16 6 12.7 102 4″ 4 2
     buttonbit-gt60-f15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-gt60-f16 8 16 8 14 127 5″ 4 2
     buttonbit-gt60-f18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-gt60-fs19 10 14 9 12.7 115 4 1/2″ 5 0
    10 16 7 16 127 5″ 5 0
    10 16 8 16 140 5 1/2″ 5 0
    10 16 8 16 152 6″ 5 0
    Iacta Center
     buttonbit-gt60-d14 8 12.7 4/2 12.7/9.5 93 3 11/16″ 4 0
    8 12.7 4/2 12.7/9.5 95 3 3/4″ 4 0
     buttonbit-gt60-d15 8 14 4/3 12.7/11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 1
     buttonbit-gt60-d16 8 16 4/4 16/14 140 5 1/2″ 4 2
    8 16 6/4 16/14 152 6″ 4 0
     buttonbit-gt60-ds18 10 14 5/3 12.7 / 12.7 16 / 12.7 115 4 1/2″ 5 0
    10 16 5/3 127 5″ 5 0
    10 16 5/4 16/14 140 5 1/2″ 5 0
    Flat Face / Retrac
     buttonbit-gt60-fr14 8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
     buttonbit-gt60-fr18 9 12.7 9 11 93 3 11/16″ 1 0
     buttonbit-gt60-fr18-2 9 12.7 9 12.7 93 3 11/16″ 2 0
     buttonbit-gt60-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-gt60-fr15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-gt60-fr16 8 16 8 14 127 5″ 4 2
     buttonbit-gt60-fr17 9 12.7 8 11 93 3 11/16″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-gt60-fr18-2 9 14 9 12.7 102 4″ 3 1
    9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
    9 16 9 16 127 5″ 3 1
    Iacta Center / Retrac
     buttonbit-gt60-dr14 8 12.7 4/2 12.7/9.5 93 3 11/16″ 4 0
    8 12.7 4/2 12.7/9.5 95 3 3/4″ 4 0
     buttonbit-gt60-dr15 8 14 4/3 12.7/11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 0
      buttonbit-gt60-drs18 10 14 5/3 12.7 / 12.7 115 4 1/2″ 5 0
    10 16 5/3 16 / 12.7 127 5″ 5 0
    10 16 5/4 16/14 140 5 1/2″ 5 0

     

    MF-Rod GT60 - GT60 - Rd 64 2-1/4″ TRAPEZOIDALE FILUM (60mm) 3-3/8″ OD FEMINA (85MM) Carburized
     gt60mfrod D TANDEM (L.) FILUM
    mm FT Lifit ius
    85 3660 12′ GT60F GT60
    85 4270 14′ GT60F GT60
    85 6100 20′ GT60F GT60
    MF-TUBE GT60 - GT60 - Rd 76 2-1/4″ TRAPEZOIDALE FILUM (60mm) X 3″ CIRCUM (76mm) Carburized
     gt60mftube D TANDEM (L.) FILUM
    mm FT Lifit ius
    76 1220 4′ GT60F GT60
    76 1525 5′ GT60F GT60
    76 1830 6′ GT60F GT60
    76 2440 8′ GT60F GT60
    76 3050 10′ GT60F GT60
    76 3660 12′ GT60F GT60
    76 4270 14′ GT60F GT60
    76 5200 17 3/4″ GT60F GT60
    Button bit Carbide dimensio Dimensiones D Flushinga foraminis
    Cange Front
    [No.] [mm] [No.] [mm] [mm] [in] Front Latus
     ST68-1 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2″ 4 0
    Dux Retrac
     ST68-2 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2″ 4 0
    8 12 10 12 102 4″ 4 0
    Grave officium
     ST68-3 6 12 8 14 89 3 1/2″ 2 0
    Colling bit
     ST68-4 8 16 9 16 152 6″ 3 0
    Retrac frenum, Gravis Officium
     ST68-5 5 14 8 16 102 4″ 2 0
    Reaming frenum
     ST68-6 4 16 8 16 152 4 1/2″ 4
    9 16 9 16 204 5″ 3 0
    9 16 9 18 254 4 1/2″ 3 0

     

     ST68 D TANDEM (L.) FILUM
    mm FT Lifit ius
    87 1525 5′ ST68F ST68
    87 1830 6′ ST68F ST68

    Related Products

    Whatsapp Online Chat!