Tapered rod
Taperdrill stangwurdt brûkt foar rock boarring, blasting gatten en oare boarjen wurken yn de steengroeven, stienkoalminen, ferkear en oare contractions.It wurket mei taper drill bits en hat ferskillende lingte foar ferskate applikaasjes, ús taperdrill stangs komme yn in ferskaat oan taper hoeken, oer it algemien, de lichte plicht rock drill meastal brûke 7 taper of lytsere taper hoek, de swiere plicht rock drill benammen brûke 11, 12 taper hoek.En de basis teory is dat taper drill roeden en taper drill bits moatte wêze yn deselde tapered graad.Wy leverjetapered rods yn in folslein oanbod fan shank konfiguraasjes en stielen hex diameters foar hân-holden pneumatyske boarjen behoeften.
(1) Stielklasse: 95CrMo lykweardich oan SANDBAR 20 of C253, Z708, sanbar 23, 55SiMnMo
(2)Shank grutte: hex.22mm × 108mm, hex.22mm × 159mm, hex.22mm × 80mm, hex.25mm × 108mm.hex.25mm × 159mm
(3) Taper: 4°46′,6,7,11,12 graden ensfh
(4) Lengte: 0.4m-10m
(5) Pakket: yn houten koffer as yn bondels.
(6) Produktiviteit: 50000MT / moanne
| Forged kraach tapered roeden | |||
| Skeakelje hex.22 mm (7/8 ″) x 108 mm (4 1/4 ″).Rod hex.22 mm (7/8).Spoelgat diameter 6,7 mm | |||
| | |||
| ROD KRUS | Lingte | Gewicht ca. | |
| mm | foet / inch | kg | |
| 4º46′ taper hoeke | |||
| 22H | 800 | 2'7½" | 2.8 |
| 22H | 1600 | 5'3" | 5.3 |
| 22H | 2 000 | 6'6¾" | 6.5 |
| 22H | 2 400 | 7'10½" | 7.7 |
| 22H | 3 200 | 10'6" | 10.2 |
| 22H | 3 500 | 11'5¾" | 11.1 |
| 22H | 4 000 | 13'1½" | 12.7 |
| 7º taper hoek | |||
| 22H | 400 | 1'3¾" | 1.6 |
| 22H | 800 | 2'7½" | 2.8 |
| 22H | 1 600 | 5'3" | 5.2 |
| 22H | 1 830 | 6′ | 6.0 |
| 22H | 2 000 | 6'6¾" | 6.5 |
| 22H | 2 435 | 8′ | 7.8 |
| 22H | 3 050 | 10′ | 9.7 |
| 22H | 3 200 | 10'6" | 10.1 |
| 22H | 3 600 | 12′ | 11.4 |
| 22H | 4 000 | 13'1½" | 12.6 |
| 22H | 4 800 | 15'9" | 15.1 |
| 22H | 5 600 | 18'4½" | 17.5 |
| 22H | 6 400 | 21′ | 20.0 |
| 22H | 7 200 | 23'7½" | 22.4 |
| 22H | 8 000 | 26'3" | 24.9 |
| 11º taper hoek | |||
| 22H | 800 | 2'7½" | 2.8 |
| 22H | 1 220 | 4′ | 4.1 |
| 22H | 1 525 | 5′ | 5.0 |
| 22H | 1 600 | 5'3" | 5.3 |
| 22H | 1 830 | 6′ | 6.0 |
| 22H | 2 000 | 6'6¾" | 6.5 |
| 22H | 2 435 | 8′ | 7.8 |
| 22H | 3 200 | 10'6" | 10.2 |
| 22H | 3 655 | 11'11⅞" | 11.6 |
| 22H | 4 000 | 13'1½" | 12.6 |
| 22H | 4 800 | 15'9" | 15.1 |
| 22H | 5 600 | 18'4½" | 17.6 |
| 22H | 6 400 | 21′ | 20.0 |
| 22H | 7 200 | 23'7½" | 22.5 |
| 22H | 8 000 | 26'3" | 24.9 |
| 12º taper hoek | |||
| 22H | 610 | 2′ | 2.2 |
| 22H | 800 | 2′ 7½" | 2.8 |
| 22H | 1 220 | 4′ | 4.1 |
| 22H | 1 525 | 5′ | 5.0 |
| 22H | 1 830 | 6′ | 6.0 |
| 22H | 2 000 | 6'6¾" | 6.5 |
| 22H | 2 435 | 8′ | 7.8 |
| 22H | 3 050 | 10′ | 9.7 |
| 22H | 3 200 | 10'6" | 10.2 |
| 22H | 3 655 | 11'11⅞" | 11.6 |
| 22H | 3 965 | 13′ | 12.5 |
| 22H | 4 800 | 15'9" | 15.1 |
| 22H | 5 600 | 18'4½" | 17.5 |
| 22H | 6 400 | 21′ | 20.0 |
| 22H | 7 200 | 23'7½" | 22.4 |
| 22H | 8 000 | 26′ 3′ | 24.9 |
Tapered apparatuer-Drill roeden -H22 mm
| Rubber kraach roeden | |||
| Heks fan de skaal.22 mm (7/8 ″) x 159 mm (6 1/4 ″).Stang hex.22 mm (7/8).Spoelgat diameter 6 mm | |||
 | |||
| ROD KRUS | Lingte | Gewicht ca. | |
| mm | foet / inch | kg | |
| 11° taper hoek | |||
| 22H | 600 | 1'11⅝" | 2.5 |
| 22H | 900 | 2'11⅜" | 3.3 |
| 22H | 1 000 | 3'3⅜" | 3.7 |
| 22H | 1 200 | 3'11¼" | 4.3 |
| 22H | 1 300 | 4'3⅛" | 4.6 |
| 22H | 1 400 | 4'7⅛" | 4.9 |
| 22H | 1 500 | 4'11" | 5.2 |
| 22H | 1 600 | 5'3" | 5.5 |
| 22H | 1 800 | 5'10⅞" | 5.7 |
| 22H | 2 000 | 6'6¾" | 6.7 |
| 22H | 2 200 | 7'2⅝" | 7.4 |
| 22H | 2 400 | 7'10½" | 7.7 |
| 22H | 2 600 | 8'6⅜" | 8.6 |
| 22H | 2 800 | 9'2¼" | 9.2 |
| 22H | 3 000 | 9'10⅛" | 10.0 |
| 22H | 3 200 | 10'6" | 10.5 |
| 22H | 3 400 | 10'9⅞" | 10.8 |
| 22H | 3 600 | 11'9¾" | 11.5 |
| 22H | 3 800 | 12'5⅝" | 12.3 |
| 22H | 4 200 | 13'9⅜" | 13.6 |
| 22H | 4 500 | 14'9⅛" | 14.5 |
Tapered apparatuer-Drill roeden-H25 mm
| Tapered roeden | |||
| Heks fan de skaal.25 mm (1 ″) x 108 mm (4 1/4 ″).Stang hex.25 mm (1 inch).Spoelgat diameter 8,6 mm | |||
 | |||
| ROD KRUS | Lingte | Gewicht ca. | |
| mm | foet / inch | kg | |
| 7º taper hoek | |||
| 25H | 600 | 1'11⅝" | 2.8 |
| 25H | 1 220 | 4′ | 5.3 |
| 25H | 1 500 | 4'11" | 6.4 |
| 25H | 1 600 | 5'3" | 6.8 |
| 25H | 1 830 | 6′ | 7.7 |
| 25H | 2 000 | 6'6¾" | 8.3 |
| 25H | 2 200 | 7'2⅝" | 9.1 |
| 25H | 2 400 | 7'10½" | 9.9 |
| 25H | 2 600 | 8'6⅜" | 10.7 |
| 25H | 3 200 | 10'6" | 13.0 |
| 25H | 3 900 | 12'9½" | 15.8 |
Tapered apparatuer-Drill roeden-H25 mm
| Forged kraach roeden | |||
| Heks fan de skaal.25 mm (1 ″) x 159 mm (6 1/4 ″).Stang hex.25 mm (1 inch).Spoelgat diameter 8,6 mm | |||
 | |||
| ROD KRUS | Lingte | Gewicht ca. | |
| mm | foet / inch | kg | |
| 12° taper hoek | |||
| 25H | 500 | 1'7⅝" | 2.7 |
| 25H | 700 | 2'3½" | 3.5 |
| 25H | 1 000 | 3'3⅜" | 4.7 |
| 25H | 1 400 | 4'7⅛" | 62 |
| 25H | 1 600 | 5'3" | 6.8 |
| 25H | 2 000 | 6'6¾" | 8.5 |
| 25H | 2 500 | 8'2⅜" | 10.4 |
| 25H | 2 600 | 8'6⅜" | 10.9 |
| 25H | 3 200 | 10'6" | 13.2 |
| 25H | 3 300 | 10'9⅞" | 13.6 |
| 25H | 3 550 | 11'5¾" | 14.6 |
| 25H | 3 800 | 12'5⅝" | 15.6 |
| 25H | 4 600 | 11′ | 18.7 |
