Bench drilling

Koarte beskriuwing:

Bench- en produksjeboarynstruminten omfetsje stangen, skaftadapters, koppelingen en bits.Wy hawwe benammen 9 triedden: R3212, R32, HL38, T38, T45, T51, T60, ST58 en ST68.Se kinne brûkt wurde mei knop bits, cross bits en reaming produkten.Sanshan drilling's wiidweidige oanbod fan ark- en produksje-rotsboarynstruminten omfettet alles fan 1” tou-thread-apparatuer oant T60-thread-apparatuer, In protte klanten sizze dat de boorstangen, buizen en knopbits de bêste binne op 'e mar ...

Stjoer e-mail nei ús Download as PDF

Produkt Detail

R32

T35

R38

T38

T45

T51

ST58

GT60

ST68

Produkt Tags

Bench- en produksjeboarynstruminten omfetsje stangen, skaftadapters, koppelingen en bits.Wy hawwe benammen 9 threads:R3212, R32,HL38, T38, T45, T51, T60,ST58enST68.Se kinne brûkt wurde meiknop bits, cross bits en reaming produkten.

Sanshan drilling syn wiidweidige oanbod fan bank en produksje rots boarring ark omfettet alles fan 1 "rope thread apparatuer oant T60 thread apparatuer, In protte klanten sizze dat de drill roeden, buizen enknop bytsjes binne de bêste op 'e merk hjoed.Litte wy gewoan sizze dat se de produktiviteit signifikant sille ferbetterje.

Bench drilling-R32

Bench drilling-T35

Bench drilling-R38

Bench drilling-T38

Bench drilling-T45

Bench drilling-T51

Bench drilling-ST58

Bench drilling-GT60

R25 (1"), R28 (1 1/8"), R32 (1 1/4"), R/T38 (1 1/2"), T45 (1 3/4"), T51 (2"), T60 (2 3/8")
Drill bit R/T38, Extension rod T38 – Hex.32 mm – T38, Extension rod T38 – Round 38 mm – T38 (Speedrod), Extension rod R38 – Round 38 mm – R38,
Verlengstang T38 – Rûn 38 mm – T38, Verlengstang T38 – Rûn 38 mm – T38 (mei dûbele tried)Gefierstang T38 – Rûn 45 mm – T38 (Speedrod),
Gids buisT38,Koppeling R/T 38.rommelich bytsje, pilot adapter,

Beskriuwing:extension rod, oare nammen binne Extension drill steel, Extension drill rod, en Extension steel, M/F rod ( Speedrod ),

Foarige: Overburden Drill Bit / Excentric Drill Bit

Folgjende: Oven tapping

Knop bytsje	Carbide diminsje				Ofmjittings D		Flushing gat
	Gauge		Front		Ofmjittings D		Flushing gat
	[Nee.]	[mm]	[Nee.]	[mm]	[mm]	[yn]	Front	Side
	5	9	2	9	41	1 5/8"	1	1
	5	9.5	2	8	43	1 11/16"	1	1
	5	9.5	2	9	43	1 11/16"	1	1
	5	10	2	9	45	1 3/4"	1	1
	5	11	2	9	48	1 7/8"	1	2
	5	11	2	10	51	2"	1	1

	6	8	2	8	41	1 5/8"	2	0
	6	8	2	8	41	1 5/8"	2	1
	6	8	2	8	43	1 11/16"	2	0
	6	9	2	9	45	1 3/4"	2	0
	6	9.5	2	9.5	48	1 7/8"	2	0
	6	11	2	9	51	2"	2	0

	6	9	3	7	43	1 11/16"	3	1
	6	9	3	8	45	1 3/4"	3	1
	6	10	3	8	45	1 3/4"	3	1
	6	9	3	9	48	1 7/8"	3	1
	6	10	3	8	48	1 7/8"	3	1
	6	11	3	9	51	2"	3	1
	6	10	3	9.5	54	2 1/8"	3	1
	6	10	3	10	57	2 1/4"	3	1

	6	10	3	8	43	1 11/16"	3	1
	6	9	3	7	43	1 11/16"	3	1
	6	10	3	8	45	1 3/4"	3	1
	6	10	3	8	48	1 7/8"	3	1
Flat Face / Retrac
	6	9	3	9	48	1 7/8"	3	1
	6	10	3	9.5	51	2"	3	1
	6	10	3	9.5	54	2 1/8"	3	1
	6	10	3	10	57	2 1/4"	3	1
Bench drilling
Flat Face
	8	11	6	11	76	3"	2	0
	8	10	4	10	64	2 1/2"	2	0
Drop Center
	6	10	3/1	10/9	64	2 1/2"	3	0
	6	12.7	3/1	11 / 9.5	76	3"	3	0
Drop Center
	6	14	3/1	12,7 / 9,5	89	3 1/2"	3	0
	6	14	3/1	12,7 / 9,5	89	3 1/2"	3	0
Flat Face / Retrac
	8	10	4	10	64	2 1/2"	2	0
Flat Face / Retrac
	8	11	6	11	76	3"	2	0
Drop Center / Retrac
	6	10	3/1	10/9	64	2 1/2"	3	0
	6	12.7	3/1	10 / 9.5	76	3"	3	0

Drop Center / Retrac
	8	11	4/2	11 / 9.5	89	3 1/2"	4	1
	8	11	4/2	11 / 9.5	89	3 1/2"	4	1

R32 Cross bit	Carbide diminsje		Ofmjittings D		Flushing gat
	Breedte	Hichte	Ofmjittings D		Flushing gat
	[mm]	[mm]	[mm]	[yn]	Front	Side
	11.5	19	41	1 5/8"	1	4
	9.5	19	43	1 11/16"	1	4
	11.5	19	45	1 3/4"	1	4
	9.5	19	48	1 7/8"	1	4
	9.5	19	51	2"	1	4
	9.5	19	57	2 1/4"	1	4

R32 – R32 – Rd 32 1-1/4″ ROPE THREAD (32mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	RD 32	610	2′	R32	R32
	RD 32	915	3′	R32	R32
	RD 32	1000	3′ 3″	R32	R32
	RD 32	1220	4′	R32	R32
	RD 32	1525	5′	R32	R32
	RD 32	1830	6′	R32	R32
	RD 32	2000	6′7′	R32	R32
	RD 32	2435	8′	R32	R32
	RD 32	3000	9′ 10′	R32	R32
	RD 32	3050	10′	R32	R32
	RD 32	3660	12′	R32	R32
	RD 32	4265	14′	R32	R32
	RD 32	4915	16′ 1-1/2′	R32	R32
	RD 32	5490	18′	R32	R32

MF-Rod R32 – R32 – Rd 32 1-1/4″ ROPE THREAD (32mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	RD 32	915	3′	R32F	R32
	RD 32	1000	3′ 3″	R32F	R32
	RD 32	1220	4′	R32F	R32
	RD 32	1525	5′	R32F	R32
	RD 32	1830	6′	R32F	R32
	RD 32	2435	8′	R32F	R32
	RD 32	2700	8′ 10′	R32F	R32
	RD 32	2850	9′4′	R32F	R32
	RD 32	3000	9′ 10′	R32F	R32
	RD 32	3050	10′	R32F	R32
	RD 32	3660	12′	R32F	R32
	RD 32	4000	13′ 1-1/2′	R32F	R32
	RD 32	4270	14′	R32F	R32
	RD 32	5370	17′ 7-1/2′	R32F	R32
	RD 32	6300	20′ 8′	R32F	R32

Knop bytsje	Carbide diminsje				Ofmjittings D		Flushing gat
	Gauge		Front		Ofmjittings D		Flushing gat
	[Nee.]	[mm]	[Nee.]	[mm]	[mm]	[yn]	Front	Side
	6	10	3	9.5	54	2 1/8"	3	1
	6	10	3	10	57	2 1/4"	3	1
Flat Face / Retrac
	6	10	3	9.5	54	2 1/8"	3	1
	6	10	3	10	57	2 1/4"	3	1

MF-Rod T35 – T35 – Rd 39 1-3/8″ TRAPEZOIDAL THREAD (35mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	48	1220	4′	T35	T35
	48	1830	6′	T35	T35
	48	2435	8′	T35	T35
	48	3050	10′	T35	T35
	48	3660	12′	T35	T35
	48	4270	14′	T35	T35

Knop bytsje	Carbide diminsje				Ofmjittings D		Flushing gat
	Gauge		Front		Ofmjittings D		Flushing gat
	[Nee.]	[mm]	[Nee.]	[mm]	[mm]	[yn]	Front	Side
	8	10	4	10	64	2 1/2"	2	0
	8	11	6	11	76	3"	2	0
	8	12.7	6	12.7	89	3 1/2"	2	0
	8	14	6	14	102	4"	2	0
Drop Center
	6	10	3/1	10/9	64	2 1/2"	3	0
	6	10	3/1	10/9	64	2 1/2"	3	0
	6	11	3/1	11 / 9.5	70	2 3/4"	3	0
	6	11	3/1	11 / 9.5	70	2 3/4"	3	0
	6	12.7	3/1	11 / 9.5	76	3"	3	0
	6	12.7	3/1	11 / 9.5	76	3"	3	0
	6	14	3/2	12,7 / 9,5	89	3 1/2"	3	0
	6	14	3/2	12,7 / 9,5	89	3 1/2"	3	0

R38 Cross bit	Carbide diminsje		Ofmjittings D		Flushing gat
	Breedte	Hichte	Ofmjittings D		Flushing gat
	[mm]	[mm]	[mm]	[yn]	Front	Side
	12	20.6	64	2 1/2"	1	4
	12.7	25	70	2 3/4"	1	4
	12.7	25	76	3"	1	4
	12.7	25	89	3 1/2"	1	4
	16	25	102	4"	1	4

R38 – R38 – Rd 39 1-1/2″ ROPE THREAD (38mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	RD 39	915	3′	R38	R38
	RD 39	1000	3′ 3″	R38	R38
	RD 39	1220	4′	R38	R38
	RD 39	1500	4′ 11′	R38	R38
	RD 39	1830	6′	R38	R38
	RD 39	2000	6′7′	R38	R38
	RD 39	2435	8′	R38	R38
	RD 39	3050	10′	R38	R38
	RD 39	3660	12′	R38	R38
	RD 39	4000	14′	R38	R38

MF-Rod R38 – R38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	56	1220	4′	R38F	R38
	56	1525	5′	R38F	R38
	56	1830	6′	R38F	R38
	56	2000	6′7′	R38F	R38
	56	3050	10′	R38F	R38
	56	3660	12′	R38F	R38
	56	4265	14′	R38F	R38

Knop bytsje	Carbide diminsje				Ofmjittings D		Flushing gat
	Gauge		Front		Ofmjittings D		Flushing gat
	[Nee.]	[mm]	[Nee.]	[mm]	[mm]	[yn]	Front	Side
	6	10	3	10	57	2 1/4"	3	1
	6	11	3	11	64	2 1/2"	3	1
	6	11	3	9.5	57	2 1/4"	1	2
	6	12.7	3	11	64	2 1/2"	1	2
	6	12.7	3	12.7	76	3"	3	1
	6	14	4	14	89	3 1/2"	3	0
	6	12.7	5	11	70	2 3/4"	1	2
	6	12.7	5	11	76	3"	1	2
	8	10	4	10	64	2 1/2"	2	0
	8	10	4	10	70	2 3/4"	2	0
	8	11	6	11	76	3"	2	0
	8	12.7	6	12.7	89	3 1/2"	2	0
	8	14	6	14	102	4"	2	0
	8	16	6	14	115	4 1/2"	2	0
	9	11	8	10	89	3 1/2"	3	1
	9	12.7	8	12.7	102	4"	3	1
Drop Center
	6	10	3/1	10/9	64	2 1/2"	3	0
	6	11	3/1	11 / 9.5	70	2 3/4"	3	0
	6	12.7	3/1	11 / 9.5	76	3"	3	0
	6	14	3/2	12,7 / 9,5	89	3 1/2"	3	0
	8	11	4/1	10/10	76	3"	4	0
	8	11	4/2	11 / 9.5	89	3 1/2"	4	0
	8	14	4/3	12.7 / 11	102	4"	4	0
Flat Face / Retrac
	6	11	3	9.5	57	2 1/4"	1	2
	6	12.7	3	11	64	2 1/2"	1	2
	6	12.7	3	11	64	2 1/2"	3	0
	6	12.7	3	12.7	76	3"	3	1
	6	14	4	14	89	3 1/2"	3	0
	8	10	4	10	64	2 1/2"	2	0
	8	12.7	5	10	76	3"	4	0
	8	11	6	11	76	3"	2	0
	8	12.7	6	12.7	89	3 1/2"	2	0
	8	14	6	14	102	4"	2	1
Drop Center / Retrac
	6	10	3/1	10/9	64	2 1/2"	3	0
	6	11	3/1	11 / 9.5	70	2 3/4"	3	0
	6	12.7	3/1	11 / 9.5	76	3"	3	0
	6	14	3/2	12,7 / 9,5	89	3 1/2"	3	0
	8	11	4/1	10/10	76	3"	4	0
	8	11	4/2	11 / 9.5	89	3 1/2"	4	1
	8	14	4/3	12.7 / 11	102	4"	4	1

T38 Cross bit	Carbide diminsje		Ofmjittings D		Flushing gat
	Breedte	Hichte	Ofmjittings D		Flushing gat
	[mm]	[mm]	[mm]	[yn]	Front	Side
	12.7	20.6	64	2 1/2"	1	4
	12.7	25	70	2 3/4"	1	4
	12.7	25	76	3"	1	4
	12.7	25	89	3 1/2"	1	4
	16	25	102	4"	1	4

T38 – T38 – Rd 39 1-1/2 ″ TRAPEZOIDAL THREAD (38mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	RD 39	1000	3′ 3″	T38	T38
	RD 39	1220	4′	T38	T38
	RD 39	1500	4′ 11′	T38	T38
	RD 39	1525	5′	T38	T38
	RD 39	1830	6′	T38	T38
	RD 39	2000	6′7′	T38	T38
	RD 39	2435	8′	T38	T38
	RD 39	3000	9′ 10′	T38	T38
	RD 39	3050	10′	T38	T38
	RD 39	3660	12′	T38	T38
	RD 39	4000	13′ 1-1/2′	T38	T38
	RD 39	4265	14′	T38	T38

TANDEM THREAD T38 – T38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	RD 39	3050	10′	T38/T38	T38/T38
	RD 39	3660	12′	T38/T38	T38/T38
	RD 39	4265	14′	T38/T38	T38/T38

MF-Rod T38 – T38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	56	915	3′	T38F	T38
	56	1000	3′ 3″	T38F	T38
	56	1220	4′	T38F	T38
	56	1525	5′	T38F	T38
	56	1830	6′	T38F	T38
	56	2000	6′7′	T38F	T38
	56	2435	8′	T38F	T38
	56	3000	9′ 10′	T38F	T38
	56	3050	10′	T38F	T38
	56	3660	12′	T38F	T38
	56	4270	14′	T38F	T38

MF-Tube T38 – T38 – Rd 56 1-1/2 ″ TRAPEZOIDAL THREAD (38mm) X 2-7/32″ RUND (56mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	56	1220	4′	T38F	T38
	56	1525	5′	T38F	T38
	56	1830	6′	T38F	T38
	56	3050	10′	T38F	T38
	56	3660	12′	T38F	T38

Knop bytsje	Carbide diminsje				Ofmjittings D		Flushing gat
	Gauge		Front		Ofmjittings D		Flushing gat
	[Nee.]	[mm]	[Nee.]	[mm]	[mm]	[yn]	Front	Side
	6	12.7	3	12.7	76	3"	3	1
	6	14	4	14	89	3 1/2"	3	0
	8	12.7	5	10	76	3"	4	0
	8	14	6	12.7	102	4"	4	2
	8	11	6	11	76	3"	2	0
	8	12.7	6	11	82	3 1/4"	2	1
	8	12.7	6	12.7	89	3 1/2"	2	0
	8	14	6	14	102	4"	2	0
	8	16	6	14	115	4 1/2"	2	0
	8	16	8	14	127	5"	2	0
	8	16	8	16	152	6"	2	0
	9	11	8	10	89	3 1/2"	3	1
	9	12.7	8	12.7	102	4"	3	1
	9	14	9	12.7	115	4 1/2"	3	1
	9	14	9	14	127	5"	3	1
Drop Center
	6	14	3/2	12,7 / 9,5	89	3 1/2"	3	0
	8	11	4/1	10/10	76	3"	4	0
	8	12.7	4/1	12.7 / 12.7	89	3 1/2"	4	0
	8	11	4/2	11 / 9.5	83	3 1/4"	4	1
	8	11	4/2	11 / 9.5	89	3 1/2"	4	1
	8	14	4/3	12.7 / 11	102	4"	4	0
	8	14	4/3	14/11	115	4 1/2"	4	0
Flat Face / Retrac
	6	12.7	3	12.7	76	3"	3	1
	6	14	4	14	89	3 1/2"	3	0
	8	12.7	5	10	76	3"	4	0
	8	12.7	5	12.7	89	3 1/2"	4	2
	8	11	6	11	76	3"	2	0
	8	12.7	6	11	82	3 1/4"	2	0
	8	12.7	6	12.7	89	3 1/2"	2	0
	8	14	6	14	102	4"	2	1
	8	16	6	14	115	4 1/2"	2	0
	8	16	8	14	127	5"	2	0
Drop Center / Retrac
	6	11	3/1	11 / 9.5	70	2 3/4"	3	0
	6	12.7	3/1	11 / 9.5	76	3"	3	0
	6	14	3/2	12,7 / 9,5	89	3 1/2"	3	0
	8	11	4/1	10/10	76	3"	4	0
	8	12.7	4/1	12.7 / 12.7	89	3 1/2"	4	0
	8	11	4/2	11 / 9.5	89	3 1/2"	4	1
	8	14	4/3	12.7 / 11	102	4"	4	1
	8	14	4/3	14 / 12.7	115	4 1/2"	4	0
	8	16	4/3	16 / 12.7	127	5"	4	2

T45 Cross bit	Carbide diminsje		Ofmjittings D		Flushing gat
	Breedte	Hichte	Ofmjittings D		Flushing gat
	[mm]	[mm]	[mm]	[yn]	Front	Side
	12.7	25	76	3"	1	4
	12.7	25	89	3 1/2"	1	4
	16	25	102	4"	1	4

T45 – T45 – Rd 46 1-3/4 ″ TRAPEZOIDAL THREAD (45mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	RD 46	1000	3′ 3″	T45	T45
	RD 46	1220	4′	T45	T45
	RD 46	1500	4′ 11′	T45	T45
	RD 46	1525	5′	T45	T45
	RD 46	1830	6′	T45	T45
	RD 46	2000	6′7′	T45	T45
	RD 46	2435	8′	T45	T45
	RD 46	3000	9′ 10′	T45	T45
	RD 46	3050	10′	T45	T45
	RD 46	3660	12′	T45	T45
	RD 46	4265	14′	T45	T45
	RD 46	4875	16′	T45	T45
	RD 46	5490	18′	T45	T45
	RD 46	6095	20′	T45	T45

TANDEM THREAD T45 – T45 – Rd 46 1-3/4″ TRAPEZOIDAL THREAD (45mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	RD 39	3050	10′	T45/T45	T45/T45
	RD 39	3660	12′	T45/T45	T45/T45
	RD 39	4265	14′	T45/T45	T45/T45

MF-Rod T45 – T45 – Rd 46 1-3/4″ TRAPEZOIDAL THREAD (45mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	64	1000	3′ 3″	T45F	T45
	64	1220	4′	T45F	T45
	64	1500	4′ 11′	T45F	T45
	64	1525	5′	T45F	T45
	64	1830	6′	T45F	T45
	64	2000	6′7′	T45F	T45
	64	2435	8′	T45F	T45
	64	3000	9′ 10′	T45F	T45
	64	3050	10′	T45F	T45
	64	3660	12′	T45F	T45
	64	4270	14′	T45F	T45
	64	4880	16′	T45F	T45
	64	5490	18′	T45F	T45
	64	6100	20′	T45F	T45

MF-Tube T45 – T45 – Rd 64 1-3/4″ TRAPEZOIDAL THREAD (45mm) X 2-1/2″ RUND (64mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	64	1220	4′	T45F	T45
	64	1525	5′	T45F	T45
	64	1830	6′	T45F	T45
	64	2440	8′	T45F	T45
	64	3050	10′	T45F	T45
	64	3660	12′	T45F	T45
	64	4270	14′	T45F	T45

MF-Tube T45 – T45 – Rd 76 1-3/4″ TRAPEZOIDAL THREAD (45mm) X 2-1/2″ Rûn (64mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	76	1220	4′	T45F	T45
	76	1525	5′	T45F	T45
	76	1830	6′	T45F	T45
	76	2440	8′	T45F	T45
	76	3050	10′	T45F	T45
	76	3660	12′	T45F	T45

Knop bytsje	Carbide diminsje				Ofmjittings D		Flushing gat
	Gauge		Front		Ofmjittings D		Flushing gat
	[Nee.]	[mm]	[Nee.]	[mm]	[mm]	[yn]	Front	Side
	6	14	4	14	89	3 1/2"	3	0
	8	12.7	6	11	82	3 1/4"	2	1
	8	12.7	6	11	82	3 1/4"	2	1
	8	12.7	6	11	85	3 3/8"	2	1
	8	12.7	6	11	85	3 3/8"	2	1
	8	12.7	6	12.7	89	3 1/2"	2	0
	8	12.7	6	12.7	89	3 1/2"	2	0
	8	12.7	6	12.7	89	3 1/2"	2	2
	8	14	6	14	102	4"	2	0
	8	14	6	14	102	4"	2	0
	8	16	6	14	115	4 1/2"	2	0
	8	16	6	14	115	4 1/2"	2	0
	8	16	8	14	127	5"	2	0
	8	16	8	16	140	5 1/2"	2	0
	8	12.7	5	12.7	89	3 1/2"	4	2
	8	14	6	12.7	102	4"	4	2
	8	14	7	14	115	4 1/2"	4	2
	8	16	7	14	121	4 3/4"	4	2
	8	16	8	14	127	5"	4	2
	8	16	8	14	127	5"	2	0
	8	16	8	16	140	5 1/2"	2	0
	9	11	8	10	89	3 1/2"	3	1
	9	12.7	8	12.7	102	4"	3	1
	9	14	9	12.7	115	4 1/2"	3	1
	9	14	9	14	127	5"	3	1
	10	14	9	12.7	115	4 1/2"	5	0
	10	16	7	16	127	5"	5	0
	10	16	8	16	140	5 1/2"	5	0
Drop Center
	6	12.7	3/2	11 / 9.5	80	3 1/8"	3	0
	6	14	3/2	12,7 / 9,5	89	3 1/2"	3	0
	8	12.7	4/1	12.7 / 12.7	89	3 1/2"	4	0
	8	11	4/2	11 / 9.5	89	3 1/2"	4	0
	8	14	4/3	12.7 / 11	102	4"	4	0
	8	14	4/3	14 / 12.7	115	4 1/2"	4	0
	8	16	4/3	16 / 12.7	127	5"	4	0
	8	16	4/4	16/14	140	5 1/2"	4	0
	10	14	5/3	12.7 / 12.7	115	4 1/2"	5	0
	10	16	5/3	16 / 12.7	127	5"	5	0
	10	16	5/3	16/14	140	5 1/2"	5	0
Flat Face / Retrac
	6	14	4	14	89	3 1/2"	3	0
	8	12.7	6	11	82	3 1/4"	2	1
	8	12.7	6	12.7	89	3 1/2"	2	0
	8	12.7	6	12.7	93	3 11/16"	2	0
	8	12.7	6	12.7	95	3 3/4"	2	0
	8	14	6	14	102	4"	2	1
	8	16	6	14	115	4 1/2"	2	0
	8	16	8	14	127	5"	2	0
	8	16	8	16	140	5 1/2"	2	0
	9	11	8	10	89	3 1/2"	3	1
	9	12.7	8	12.7	102	4"	3	1
	9	14	9	12.7	115	4 1/2"	3	1
	9	14	9	14	127	5"	3	1
	8	12.7	5	12.7	89	3 1/2"	4	2
	8	14	6	12.7	102	4"	4	2
	8	14	7	14	115	4 1/2"	4	2
	8	16	8	14	127	5"	4	2
	8	14	8	14	127	5"	4	2
Drop Center / Retrac
	6	14	3/2	12,7 / 9,5	89	3 1/2"	3	0
	8	12.7	4/1	12.7 / 12.7	89	3 1/2"	4	0
	8	11	4/2	11 / 9.5	89	3 1/2"	4	1
	8	12.7	4/2	11 / 9.5	89	3 1/2"	4	1
	8	12.7	4/2	12,7 / 9,5	93	3 11/16"	4	0
	8	14	4/3	12.7 / 11	102	4"	4	1
	8	14	4/3	14 / 12.7	115	4 1/2"	4	0
	8	16	4/3	16 / 12.7	127	5"	4	0
	8	16	4/4	16/14	140	5 1/2"	4	0

Knop bytsje	Carbide diminsje				Ofmjittings D		Flushing gat
	Gauge		Front		Ofmjittings D		Flushing gat
	[Nee.]	[mm]	[Nee.]	[mm]	[mm]	[yn]	Front	Side
Flat Face / Retrac
	9	11	8	10	89	3 1/2"	3	1
	9	12.7	8	11	93	3 11/16"	3	1
	9	12.7	8	12.7	102	4"	3	1
Drop Center / Retrac
	8	11	4/2	11 / 9.5	89	3 1/2"	4	1
	8	12.7	4/2	12,7 / 9,5	93	3 11/16"	4	0
	8	14	4/3	12.7 / 11	102	4"	4	0
	8	14	4/3	14 / 12.7	115	4 1/2"	4	1
	8	16	4/3	16 / 12.7	127	5"	4	0

MF-Rod ST58 – ST58 – Rd 60 2-1/4 ″ TRAPEZOIDAL THREAD (58mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	81	3660	12′	ST58F	ST58
	81	4270	14′	ST58F	ST58
	81	5490	18′	ST58F	ST58
	81	6100	20′	ST58F	ST58

MF-Tube ST58 – ST58 – Rd 76 2-1/4″ TRAPEZOIDAL THREAD (58mm) X 3″ RUND (76mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	76	1220	4′	ST58F	ST58
	76	1525	5′	ST58F	ST58
	76	1830	6′	ST58F	ST58
	76	2440	8′	ST58F	ST58
	76	3050	10′	ST58F	ST58
	76	3660	12′	ST58F	ST58
	76	4270	14′	ST58F	ST58
	76	5200	17′ 3/4″	ST58F	ST58

Knop bytsje	Carbide diminsje				Ofmjittings D		Flushing gat
	Gauge		Front		Ofmjittings D		Flushing gat
	[Nee.]	[mm]	[Nee.]	[mm]	[mm]	[yn]	Front	Side
	8	12.7	6	12.7	93	3 11/16"	2	0
	8	12.7	6	12.7	95	3 3/4"	2	0
	8	14	6	12.7	102	4"	4	2
	8	16	6	12.7	102	4"	4	2
	8	14	7	14	115	4 1/2"	4	2
	8	16	8	14	127	5"	4	2
	9	14	9	12.7	115	4 1/2"	3	1
	9	14	9	14	127	5"	3	1
	10	14	9	12.7	115	4 1/2"	5	0
	10	16	7	16	127	5"	5	0
	10	16	8	16	140	5 1/2"	5	0
	10	16	8	16	152	6"	5	0
Drop Center
	8	12.7	4/2	12,7 / 9,5	93	3 11/16"	4	0
	8	12.7	4/2	12,7 / 9,5	95	3 3/4"	4	0
	8	14	4/3	12.7 / 11	102	4"	4	0
	8	14	4/3	14 / 12.7	115	4 1/2"	4	1
	8	16	4/3	16 / 12.7	127	5"	4	1
	8	16	4/4	16/14	140	5 1/2"	4	2
	8	16	6/4	16/14	152	6"	4	0
	10	14	5/3	12,7 / 12,7 16 / 12,7	115	4 1/2"	5	0
	10	16	5/3	12,7 / 12,7 16 / 12,7	127	5"	5	0
	10	16	5/4	16/14	140	5 1/2"	5	0
Flat Face / Retrac
	8	12.7	6	12.7	93	3 11/16"	2	0
	8	12.7	6	12.7	95	3 3/4"	2	0
	9	12.7	9	11	93	3 11/16"	1	0
	9	12.7	9	12.7	93	3 11/16"	2	0
	8	14	6	12.7	102	4"	4	2
	8	14	7	14	115	4 1/2"	4	2
	8	16	8	14	127	5"	4	2
	9	12.7	8	11	93	3 11/16"	3	1
	9	12.7	8	12.7	102	4"	3	1
	9	14	9	12.7	102	4"	3	1
	9	14	9	12.7	115	4 1/2"	3	1
	9	14	9	14	127	5"	3	1
	9	16	9	16	127	5"	3	1
Drop Center / Retrac
	8	12.7	4/2	12,7 / 9,5	93	3 11/16"	4	0
	8	12.7	4/2	12,7 / 9,5	95	3 3/4"	4	0
	8	14	4/3	12.7 / 11	102	4"	4	0
	8	14	4/3	14 / 12.7	115	4 1/2"	4	1
	8	16	4/3	16 / 12.7	127	5"	4	0
	10	14	5/3	12.7 / 12.7	115	4 1/2"	5	0
	10	16	5/3	16 / 12.7	127	5"	5	0
	10	16	5/4	16/14	140	5 1/2"	5	0

MF-Rod GT60 – GT60 – Rd 64 2-1/4″ TRAPEZOIDAL THREAD (60mm) 3-3/8″ FRAME OD (85MM) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	85	3660	12′	GT60F	GT60
	85	4270	14′	GT60F	GT60
	85	6100	20′	GT60F	GT60

MF-Tube GT60 - GT60 - Rd 76 2-1/4" TRAPEZOIDAL THREAD (60mm) X 3" RUND (76mm) Carburized
	D	LENGTE (L)		THREAD
	D	mm	FT	Lifit	Rjochts
	76	1220	4′	GT60F	GT60
	76	1525	5′	GT60F	GT60
	76	1830	6′	GT60F	GT60
	76	2440	8′	GT60F	GT60
	76	3050	10′	GT60F	GT60
	76	3660	12′	GT60F	GT60
	76	4270	14′	GT60F	GT60
	76	5200	17′ 3/4″	GT60F	GT60

Knop bytsje	Carbide diminsje				Ofmjittings D		Flushing gat
	Gauge		Front		Ofmjittings D		Flushing gat
	[Nee.]	[mm]	[Nee.]	[mm]	[mm]	[yn]	Front	Side
	8	12	10	12	102	4"	4	0
	8	12	10	12	102	4"	4	0
	8	14	10	14	115	4 1/2"	4	0
Guide Retrac
	8	12	10	12	102	4"	4	0
	8	12	10	12	102	4"	4	0
	8	14	10	14	115	4 1/2"	4	0
	8	12	10	12	102	4"	4	0
Swiere taak
	6	12	8	14	89	3 1/2"	2	0
Kraag bit
	8	16	9	16	152	6"	3	0
Retrac bit, Heavy Duty
	5	14	8	16	102	4"	2	0
Reaming bytsje
	4	16	8	16	152	4 1/2"	4
	9	16	9	16	204	5"	3	0
	9	16	9	18	254	4 1/2"	3	0

D	LENGTE (L)		THREAD
D	mm	FT	Lifit	Rjochts
87	1525	5′	ST68F	ST68
87	1830	6′	ST68F	ST68

relatearre produkten

Bench drilling

Koarte beskriuwing:

Produkt Detail

R32

T35

R38

T38

T45

T51

ST58

GT60

ST68

Produkt Tags

relatearre produkten

Shank adapters

Boorstang

Thread knop bits

Boaringsoperaasjes fereaskje apparatuer dy't duorsum, betrouber en maklik te brûken is.En by ús bedriuw begripe wy dat de kwaliteit fan 'e apparatuer it ferskil is tusken sukses en mislearring foar boaroperaasjes ...

Down the hole (DTH) drilling bits binne in nijsgjirrige ynnovaasje dy't revolúsjonearje boarjen operaasjes yn de mynbou en bou yndustry.Dizze alsidige bits mei hege prestaasjes, ek wol hammerbits neamd, meitsje ús ...

Rock Auger Cutting Drill Teeth binne in nije ynnovaasje dy't de mynbou- en bousektor mei stoarm nimt.Dizze hege prestaasjes tosken binne spesifyk ûntworpen foar gebrûk mei rotsboargers en wurde makke fan in spesjale h ...

Road Milling Picks: De Ultimate Solution foar effisjint Pavement Removal De dyk bou yndustry hat krekt krigen in grutte ympuls mei de komst fan in nij, ynnovative ark - de wei milling pick.Dizze cuttin ...

Bullet Teeth: The New Generation of Rotary Drilling Teeth.Bekend as kûgeltosken, binne dizze ynnovative ark ûntworpen om boarjen e ...