Bankuko zulaketak

Bankuko zulaketa Irudi aipagarria
  • Bankuko zulaketak
  • Bankuko zulaketak
  • Bankuko zulaketak

Deskribapen laburra:

Bankuko eta produkzioko zulatzeko tresnen artean hagaxkak, zurtoin-egokitzaileak, akoplamenduak eta bitsak daude.Batez ere 9 hari ditugu: R3212, R32, HL38, T38, T45, T51, T60, ST58 eta ST68.Botoi-bitekin, gurutze-bitekin eta fresatzeko produktuekin erabil daitezke.Sanshan zulaketa-ren bankuko eta produkzioko harkaitzak zulatzeko tresnen sorta osoa barne hartzen du 1" soka-hari ekipamendutik hasi eta T60 hari-ekiporaino.


Deskargatu PDF moduan

Produktuaren xehetasuna

R32

T35

R38

T38

T45

T51

ST58

GT60

ST68

Produktuen etiketak

Bankuko eta produkzioko zulatzeko tresnen artean hagaxkak, zurtoin-egokitzaileak, akoplamenduak eta bitsak daude.Batez ere 9 hari ditugu:R3212, R32,HL38, T38, T45, T51, T60,ST58etaST68.Hauekin erabil daitezkebotoi-bitak, gurutze-bitak eta fresatzeko produktuak.

Sanshan zulaketa-ren bankuko eta produkzioko harkaitzak zulatzeko tresnen sorta osoa barne hartzen du 1" soka-hari ekipamendutik hasi eta T60 hari-ekiporaino. Bezero askok diote zulagailuak, hodiak etabotoiaren bitGaur egun merkatuan dauden onenak dira.Esan dezagun produktibitatea nabarmen hobetuko dutela.

Bankuko zulaketa-R32
 r32
Bankuko zulaketa-T35
 t35
Bankuko zulaketa-R38
 r38
Bankuko zulaketa-T38
 t38
Bankua zulatzea -T45
 t45
Bankua zulatzea -T51
 t51
Bankua zulatzea -ST58
 st58
Bankuko zulaketa-GT60
gt60

R25 (1"),R28 (1 1/8"),R32 (1 1/4"),R/T38 (1 1/2"),T45 (1 3/4"),T51 (2"), T60 (2 3/8")
Zulagailu R/T38,T38 luzapen-barra – Hex.32 mm – T38, Luzapen hagaxka T38 – Biribila 38 mm – T38 (Speedrod), Luzapen hagaxka R38 – Biribila 38 mm – R38,
Luzapen hagaxka T38 – Biribila 38 mm – T38,Luzapen hagaxka T38 – Biribila 38 mm – T38 (hari bikoitzarekin)Gida hagaxka T38 – Biribila 45 mm – T38 (Speedrod),
Gida-hodiaT38,Akoplamendua R/T 38.apur bat erreserbatzea,adaptatzaile pilotua,

Deskribapena:luzapen-barra, beste izenak Extension zulagailu altzairua, Extension zulagailu hagaxka eta Extension steel, M/F hagaxka ( Speedrod ) dira,

 

  • Aurrekoa:
  • Hurrengoa:

    • tr32

    Botoi-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Neurgailua Aurrealdea
    [Ez.] [mm] [Ez.] [mm] [mm] [in] Aurrealdea Aldea
     r32-botoi-bit-7 5 9 2 9 41 1 5/8″ 1 1
    5 9.5 2 8 43 1 11/16″ 1 1
    5 9.5 2 9 43 1 11/16″ 1 1
    5 10 2 9 45 1 3/4″ 1 1
    5 11 2 9 48 1 7/8″ 1 2
    5 11 2 10 51 2″ 1 1
     r32-botoi-bit-8 6 8 2 8 41 1 5/8″ 2 0
    6 8 2 8 41 1 5/8″ 2 1
    6 8 2 8 43 1 11/16″ 2 0
    6 9 2 9 45 1 3/4″ 2 0
    6 9.5 2 9.5 48 1 7/8″ 2 0
    6 11 2 9 51 2″ 2 0
     r32-botoi-bit-9 6 9 3 7 43 1 11/16″ 3 1
    6 9 3 8 45 1 3/4″ 3 1
    6 10 3 8 45 1 3/4″ 3 1
    6 9 3 9 48 1 7/8″ 3 1
    6 10 3 8 48 1 7/8″ 3 1
    6 11 3 9 51 2″ 3 1
    6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
     r32-botoi-bit-9-2 6 10 3 8 43 1 11/16″ 3 1
    6 9 3 7 43 1 11/16″ 3 1
    6 10 3 8 45 1 3/4″ 3 1
    6 10 3 8 48 1 7/8″ 3 1
    Aurpegi laua / Retrac
     r32-button-bit-flatface-9 6 9 3 9 48 1 7/8″ 3 1
    6 10 3 9.5 51 2″ 3 1
    6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
    Bankuko zulaketak
    Aurpegi laua
     r32-banku-laua 8 11 6 11 76 3″ 2 0
    8 10 4 10 64 2 1/2″ 2 0
    Jarri zentroa
     r32-banku-dropcenter-10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
    Jarri zentroa
     r32-bankua-dropcenter-11 6 14 3/1 12,7 / 9,5 89 3 1/2″ 3 0
    6 14 3/1 12,7 / 9,5 89 3 1/2″ 3 0
    Aurpegi laua / Retrac
     r32-banku-azalera laua-retrac-12 8 10 4 10 64 2 1/2″ 2 0
    Aurpegi laua / Retrac
     r32-banku-laua-erretrak-14 8 11 6 11 76 3″ 2 0
    Drop Center / Retrac
     r32-banku-dropcenter-retrac-11 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 12.7 3/1 10 / 9.5 76 3″ 3 0
    Drop Center / Retrac
     r32-banku-dropcenter-retrac-14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
    8 11 4/2 11 / 9.5 89 3 1/2″ 4 1

     

    R32 Gurutze-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Zabalera Altuera
    [mm] [mm] [mm] [in] Aurrealdea Aldea
     r32-gurutze-bit 11.5 19 41 1 5/8″ 1 4
    9.5 19 43 1 11/16″ 1 4
    11.5 19 45 1 3/4″ 1 4
    9.5 19 48 1 7/8″ 1 4
    9.5 19 51 2″ 1 4
    9.5 19 57 2 1/4″ 1 4

     

     

    R32 – R32 – Rd 32 1-1/4″ SOKA HARIA (32mm) Karburizatua
     r32 zulagailu D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    RD 32 610 2′ R32 R32
    RD 32 915 3′ R32 R32
    RD 32 1000 3′ 3″ R32 R32
    RD 32 1220 4′ R32 R32
    RD 32 1525 5′ R32 R32
    RD 32 1830 6′ R32 R32
    RD 32 2000 6′ 7″ R32 R32
    RD 32 2435 8′ R32 R32
    RD 32 3000 9′ 10″ R32 R32
    RD 32 3050 10′ R32 R32
    RD 32 3660 12′ R32 R32
    RD 32 4265 14′ R32 R32
    RD 32 4915 16′ 1-1/2″ R32 R32
    RD 32 5490 18′ R32 R32
    MF-Rod R32 – R32 – Rd 32 1-1/4″ SOKA HARIA (32mm) Karburizatua
     r32drillrod-mf D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    RD 32 915 3′ R32F R32
    RD 32 1000 3′ 3″ R32F R32
    RD 32 1220 4′ R32F R32
    RD 32 1525 5′ R32F R32
    RD 32 1830 6′ R32F R32
    RD 32 2435 8′ R32F R32
    RD 32 2700 8′ 10″ R32F R32
    RD 32 2850 9′ 4″ R32F R32
    RD 32 3000 9′ 10″ R32F R32
    RD 32 3050 10′ R32F R32
    RD 32 3660 12′ R32F R32
    RD 32 4000 13′ 1-1/2″ R32F R32
    RD 32 4270 14′ R32F R32
    RD 32 5370 17′ 7-1/2″ R32F R32
    RD 32 6300 20′ 8″ R32F R32

    t35

    Botoi-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Neurgailua Aurrealdea
    [Ez.] [mm] [Ez.] [mm] [mm] [in] Aurrealdea Aldea
     buttonbit-flatface 6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
    Aurpegi laua / Retrac
     buttonbit-flatface-retrac 6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1

     

    MF-Rod T35 – T35 – Rd 39 1-3/8″ HARIA TRAPEZOIDALA (35 mm) Karburizatua
     t35mfrod D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    48 1220 4′ T35 T35
    48 1830 6′ T35 T35
    48 2435 8′ T35 T35
    48 3050 10′ T35 T35
    48 3660 12′ T35 T35
    48 4270 14′ T35 T35

    r38

    Botoi-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Neurgailua Aurrealdea
    [Ez.] [mm] [Ez.] [mm] [mm] [in] Aurrealdea Aldea
     botoia-r38-f12 8 10 4 10 64 2 1/2″ 2 0
     botoia-r38-f14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    Jarri zentroa
     buttonbit-r38-d10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11 / 9.5 70 2 3/4″ 3 0
    6 11 3/1 11 / 9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-r38-d11 6 14 3/2 12,7 / 9,5 89 3 1/2″ 3 0
    6 14 3/2 12,7 / 9,5 89 3 1/2″ 3 0

     

    R38 Gurutze-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Zabalera Altuera
    [mm] [mm] [mm] [in] Aurrealdea Aldea
     crossbit-r38 12 20.6 64 2 1/2″ 1 4
    12.7 25 70 2 3/4″ 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    R38 – R38 – Rd 39 1-1/2″ SOKA HARIA (38mm) Karburizatua
     r38 zulagailuak D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    RD 39 915 3′ R38 R38
    RD 39 1000 3′ 3″ R38 R38
    RD 39 1220 4′ R38 R38
    RD 39 1500 4′ 11″ R38 R38
    RD 39 1830 6′ R38 R38
    RD 39 2000 6′ 7″ R38 R38
    RD 39 2435 8′ R38 R38
    RD 39 3050 10′ R38 R38
    RD 39 3660 12′ R38 R38
    RD 39 4000 14′ R38 R38
    MF-Rod R38 – R38 – Rd 39 1-1/2″ HARIA TRAPEZOIDALA (38mm) Karburizatua
     r38mfrod D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    56 1220 4′ R38F R38
    56 1525 5′ R38F R38
    56 1830 6′ R38F R38
    56 2000 6′ 7″ R38F R38
    56 3050 10′ R38F R38
    56 3660 12′ R38F R38
    56 4265 14′ R38F R38

    t38

    Botoi-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Neurgailua Aurrealdea
    [Ez.] [mm] [Ez.] [mm] [mm] [in] Aurrealdea Aldea
     buttonbit-t38-f9 6 10 3 10 57 2 1/4″ 3 1
    6 11 3 11 64 2 1/2″ 3 1
     buttonbit-t38-f9-2 6 11 3 9.5 57 2 1/4″ 1 2
    6 12.7 3 11 64 2 1/2″ 1 2
     buttonbit-t38-f10 6 12.7 3 12.7 76 3″ 3 1
    6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t38-f11 6 12.7 5 11 70 2 3/4″ 1 2
    6 12.7 5 11 76 3″ 1 2
     buttonbit-t38-f12 8 10 4 10 64 2 1/2″ 2 0
    8 10 4 10 70 2 3/4″ 2 0
     buttonbit-t38-f13 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t38-f17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
    Jarri zentroa
     buttonbit-t38-d10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11 / 9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-t38-d11 6 14 3/2 12,7 / 9,5 89 3 1/2″ 3 0
     buttonbit-t38-d13 8 11 4/1 10/10 76 3″ 4 0
     buttonbit-t38-d14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 0
     buttonbit-t38-d15 8 14 4/3 12,7 / 11 102 4″ 4 0
    Aurpegi laua / Retrac
     buttonbit-t38-fr9 6 11 3 9.5 57 2 1/4″ 1 2
    6 12.7 3 11 64 2 1/2″ 1 2
     buttonbit-t38-fr9-2 6 12.7 3 11 64 2 1/2″ 3 0
    6 12.7 3 12.7 76 3″ 3 1
    buttonbit-t38-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t38-fr12 8 10 4 10 64 2 1/2″ 2 0
     buttonbit-t38-fr13 8 12.7 5 10 76 3″ 4 0
     buttonbit-t38-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 1
    Drop Center / Retrac
     buttonbit-t38-dr10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11 / 9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-t38-dr11 6 14 3/2 12,7 / 9,5 89 3 1/2″ 3 0
     buttonbit-t38-dr13 8 11 4/1 10/10 76 3″ 4 0
     buttonbit-t38-dr14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
     buttonbit-t38-dr15 8 14 4/3 12,7 / 11 102 4″ 4 1

     

    T38 Gurutze-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Zabalera Altuera
    [mm] [mm] [mm] [in] Aurrealdea Aldea
     crossbit-t38 12.7 20.6 64 2 1/2″ 1 4
    12.7 25 70 2 3/4″ 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    T38 – T38 – Rd 39 1-1/2″ HARI TRAPEZOIDALA (38mm) Karburizatua
     t38 zulagailu D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    RD 39 1000 3′ 3″ T38 T38
    RD 39 1220 4′ T38 T38
    RD 39 1500 4′ 11″ T38 T38
    RD 39 1525 5′ T38 T38
    RD 39 1830 6′ T38 T38
    RD 39 2000 6′ 7″ T38 T38
    RD 39 2435 8′ T38 T38
    RD 39 3000 9′ 10″ T38 T38
    RD 39 3050 10′ T38 T38
    RD 39 3660 12′ T38 T38
    RD 39 4000 13′ 1-1/2″ T38 T38
    RD 39 4265 14′ T38 T38
    TANDEM HARI T38 – T38 – Rd 39 1-1/2″ HARIA TRAPEZOIDALA (38mm) Karburizatua
     t38drillrod-tandem-therad D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    RD 39 3050 10′ T38/T38 T38/T38
    RD 39 3660 12′ T38/T38 T38/T38
    RD 39 4265 14′ T38/T38 T38/T38
    MF-Rod T38 – T38 – Rd 39 1-1/2″ HARIA TRAPEZOIDALA (38mm) Karburizatua
     t38mfrod D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    56 915 3′ T38F T38
    56 1000 3′ 3″ T38F T38
    56 1220 4′ T38F T38
    56 1525 5′ T38F T38
    56 1830 6′ T38F T38
    56 2000 6′ 7″ T38F T38
    56 2435 8′ T38F T38
    56 3000 9′ 10″ T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38
    56 4270 14′ T38F T38
    MF-Tube T38 – T38 – Rd 56 1-1/2″ HARIA TRAPEZOIDALA (38mm) X 2-7/32″ BOROBILA (56mm) Karburatuta
     t38mftube D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    56 1220 4′ T38F T38
    56 1525 5′ T38F T38
    56 1830 6′ T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38

    t45

    Botoi-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Neurgailua Aurrealdea
    [Ez.] [mm] [Ez.] [mm] [mm] [in] Aurrealdea Aldea
     buttonbit-t45-9 6 12.7 3 12.7 76 3″ 3 1
     buttonbit-t45-10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t45-13 8 12.7 5 10 76 3″ 4 0
     buttonbit-t45-14 8 14 6 12.7 102 4″ 4 2
     buttonbit-t45-14-2 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t45-16 8 16 8 14 127 5″ 2 0
    8 16 8 16 152 6″ 2 0
     buttonbit-t45-17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t45-18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
    Jarri zentroa
     buttonbit-t45-d11 6 14 3/2 12,7 / 9,5 89 3 1/2″ 3 0
     buttonbit-t45-d13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12,7 / 12,7 89 3 1/2″ 4 0
     buttonbit-t45-d14 8 11 4/2 11 / 9.5 83 3 1/4″ 4 1
    8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
     buttonbit-t45-d15 8 14 4/3 12,7 / 11 102 4″ 4 0
    8 14 4/3 14/11 115 4 1/2″ 4 0
    Aurpegi laua / Retrac
     buttonbit-t45-fr9 6 12.7 3 12.7 76 3″ 3 1
     buttonbit-t45-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t45-fr13 8 12.7 5 10 76 3″ 4 0
    8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t45-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t45-fr16 8 16 8 14 127 5″ 2 0
    Drop Center / Retrac
     buttonbit-t45-dr10 6 11 3/1 11 / 9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-t45-dr11 6 14 3/2 12,7 / 9,5 89 3 1/2″ 3 0
     buttonbit-t45-dr13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12,7 / 12,7 89 3 1/2″ 4 0
     buttonbit-t45-dr14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
     buttonbit-t45-dr15 8 14 4/3 12,7 / 11 102 4″ 4 1
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 2

     

    T45 Gurutze-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Zabalera Altuera
    [mm] [mm] [mm] [in] Aurrealdea Aldea
     crossbit-t45 12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    T45 – T45 – Rd 46 1-3/4″ HARIA TRAPEZOIDALA (45 mm) Karburizatua
     t45 zulagailua D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    RD 46 1000 3′ 3″ T45 T45
    RD 46 1220 4′ T45 T45
    RD 46 1500 4′ 11″ T45 T45
    RD 46 1525 5′ T45 T45
    RD 46 1830 6′ T45 T45
    RD 46 2000 6′ 7″ T45 T45
    RD 46 2435 8′ T45 T45
    RD 46 3000 9′ 10″ T45 T45
    RD 46 3050 10′ T45 T45
    RD 46 3660 12′ T45 T45
    RD 46 4265 14′ T45 T45
    RD 46 4875 16′ T45 T45
    RD 46 5490 18′ T45 T45
    RD 46 6095 20′ T45 T45
    TANDEM HARIA T45 – T45 – Rd 46 1-3/4″ HARIA TRAPEZOIDALA (45mm) Karburizatua
     t45drillrod-tandem-haria D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    RD 39 3050 10′ T45/T45 T45/T45
    RD 39 3660 12′ T45/T45 T45/T45
    RD 39 4265 14′ T45/T45 T45/T45
    MF-Rod T45 – T45 – Rd 46 1-3/4″ HARIA TRAPEZOIDALA (45mm) Karburizatua
     t45mfrod D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    64 1000 3′ 3″ T45F T45
    64 1220 4′ T45F T45
    64 1500 4′ 11″ T45F T45
    64 1525 5′ T45F T45
    64 1830 6′ T45F T45
    64 2000 6′ 7″ T45F T45
    64 2435 8′ T45F T45
    64 3000 9′ 10″ T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    64 4880 16′ T45F T45
    64 5490 18′ T45F T45
    64 6100 20′ T45F T45
    MF-Tube T45 – T45 – Rd 64 1-3/4″ HARIA TRAPEZOIDALA (45mm) X 2-1/2″ BORONDA (64mm) Karburatuta
     t45mftube D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    64 1220 4′ T45F T45
    64 1525 5′ T45F T45
    64 1830 6′ T45F T45
    64 2440 8′ T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    MF-Tube T45 – T45 – Rd 76 1-3/4″ HARIA TRAPEZOIDALA (45mm) X 2-1/2″ BOROBILA (64mm) Karburatuta
     t45mftube D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    76 1220 4′ T45F T45
    76 1525 5′ T45F T45
    76 1830 6′ T45F T45
    76 2440 8′ T45F T45
    76 3050 10′ T45F T45
    76 3660 12′ T45F T45

    t51

    Botoi-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Neurgailua Aurrealdea
    [Ez.] [mm] [Ez.] [mm] [mm] [in] Aurrealdea Aldea
     buttonbit-t51-f10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t51-f14 8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 11 85 3 3/8″ 2 1
    8 12.7 6 11 85 3 3/8″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 2
    8 14 6 14 102 4″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t51-f16 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2″ 2 0
     buttonbit-t51-f13 8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t51-f14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-t51-f15 8 14 7 14 115 4 1/2″ 4 2
    8 16 7 14 121 4 3/4″ 4 2
     buttonbit-t51-f16 8 16 8 14 127 5″ 4 2
     buttonbit-t51-f16-2 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2″ 2 0
     buttonbit-t51-f17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t51-fr18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-t51-f19 10 14 9 12.7 115 4 1/2″ 5 0
    10 16 7 16 127 5″ 5 0
    10 16 8 16 140 5 1/2″ 5 0
    Jarri zentroa
     buttonbit-t51-d11 6 12.7 3/2 11 / 9.5 80 3 1/8″ 3 0
    6 14 3/2 12,7 / 9,5 89 3 1/2″ 3 0
     buttonbit-t51-d13 8 12.7 4/1 12,7 / 12,7 89 3 1/2″ 4 0
     buttonbit-t51-d14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 0
     buttonbit-t51-d15 8 14 4/3 12,7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 0
     buttonbit-t51-d16 8 16 4/4 16 / 14 140 5 1/2″ 4 0
     buttonbit-t51-d18 10 14 5/3 12,7 / 12,7 115 4 1/2″ 5 0
    10 16 5/3 16 / 12.7 127 5″ 5 0
    10 16 5/3 16 / 14 140 5 1/2″ 5 0
    Aurpegi laua / Retrac
     buttonbit-t51-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t51-fr14 8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t51-fr16 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2″ 2 0
     buttonbit-t51-fr17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t51-fr18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-t51-fr13 8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t51-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-t51-fr15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-t51-fr16 8 16 8 14 127 5″ 4 2
    8 14 8 14 127 5″ 4 2
    Drop Center / Retrac
     buttonbit-t51-dr11 6 14 3/2 12,7 / 9,5 89 3 1/2″ 3 0
     buttonbit-t51-dr13 8 12.7 4/1 12,7 / 12,7 89 3 1/2″ 4 0
     buttonbit-t51-dr14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
    8 12.7 4/2 11 / 9.5 89 3 1/2″ 4 1
    8 12.7 4/2 12,7 / 9,5 93 3 11/16″ 4 0
     buttonbit-t51-dr15 8 14 4/3 12,7 / 11 102 4″ 4 1
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 0
     buttonbit-t51-dr16 8 16 4/4 16 / 14 140 5 1/2″ 4 0

    st58

    Botoi-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Neurgailua Aurrealdea
    [Ez.] [mm] [Ez.] [mm] [mm] [in] Aurrealdea Aldea
    Aurpegi laua / Retrac
     buttonbit-st58-fr17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 11 93 3 11/16″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
    Drop Center / Retrac
     buttonbit-st58-dr14 8 11 4/2 11 / 9.5 89 3 1/2″ 4 1
    8 12.7 4/2 12,7 / 9,5 93 3 11/16″ 4 0
     buttonbit-st58-dr15 8 14 4/3 12,7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 0

     

    MF-Rod ST58 – ST58 – Rd 60 2-1/4″ HARIA TRAPEZOIDALA (58mm) Karburizatua
     st58mfrod D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    81 3660 12′ ST58F ST58
    81 4270 14′ ST58F ST58
    81 5490 18′ ST58F ST58
    81 6100 20′ ST58F ST58
    MF-Tube ST58 – ST58 – Rd 76 2-1/4″ HARIA TRAPEZOIDALA (58mm) X 3″ BOROBILA (76mm) Karburatuta
     st58mftube D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    76 1220 4′ ST58F ST58
    76 1525 5′ ST58F ST58
    76 1830 6′ ST58F ST58
    76 2440 8′ ST58F ST58
    76 3050 10′ ST58F ST58
    76 3660 12′ ST58F ST58
    76 4270 14′ ST58F ST58
    76 5200 17′ 3/4″ ST58F ST58

    gt60

    Botoi-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Neurgailua Aurrealdea
    [Ez.] [mm] [Ez.] [mm] [mm] [in] Aurrealdea Aldea
     buttonbit-gt60-f14 8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
     buttonbit-gt60-f14-2 8 14 6 12.7 102 4″ 4 2
    8 16 6 12.7 102 4″ 4 2
     buttonbit-gt60-f15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-gt60-f16 8 16 8 14 127 5″ 4 2
     buttonbit-gt60-f18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-gt60-fs19 10 14 9 12.7 115 4 1/2″ 5 0
    10 16 7 16 127 5″ 5 0
    10 16 8 16 140 5 1/2″ 5 0
    10 16 8 16 152 6″ 5 0
    Jarri zentroa
     buttonbit-gt60-d14 8 12.7 4/2 12,7 / 9,5 93 3 11/16″ 4 0
    8 12.7 4/2 12,7 / 9,5 95 3 3/4″ 4 0
     buttonbit-gt60-d15 8 14 4/3 12,7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 1
     buttonbit-gt60-d16 8 16 4/4 16 / 14 140 5 1/2″ 4 2
    8 16 6/4 16 / 14 152 6″ 4 0
     buttonbit-gt60-ds18 10 14 5/3 12,7 / 12,7 16 / 12,7 115 4 1/2″ 5 0
    10 16 5/3 127 5″ 5 0
    10 16 5/4 16 / 14 140 5 1/2″ 5 0
    Aurpegi laua / Retrac
     buttonbit-gt60-fr14 8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
     buttonbit-gt60-fr18 9 12.7 9 11 93 3 11/16″ 1 0
     buttonbit-gt60-fr18-2 9 12.7 9 12.7 93 3 11/16″ 2 0
     buttonbit-gt60-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-gt60-fr15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-gt60-fr16 8 16 8 14 127 5″ 4 2
     buttonbit-gt60-fr17 9 12.7 8 11 93 3 11/16″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-gt60-fr18-2 9 14 9 12.7 102 4″ 3 1
    9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 127 5″ 3 1
    9 16 9 16 127 5″ 3 1
    Drop Center / Retrac
     buttonbit-gt60-dr14 8 12.7 4/2 12,7 / 9,5 93 3 11/16″ 4 0
    8 12.7 4/2 12,7 / 9,5 95 3 3/4″ 4 0
     buttonbit-gt60-dr15 8 14 4/3 12,7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2″ 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 0
      buttonbit-gt60-drs18 10 14 5/3 12,7 / 12,7 115 4 1/2″ 5 0
    10 16 5/3 16 / 12.7 127 5″ 5 0
    10 16 5/4 16 / 14 140 5 1/2″ 5 0

     

    MF-Rod GT60 – GT60 – Rd 64 2-1/4″ HARIA TRAPEZOIDALA (60mm) 3-3/8″ EME OD (85MM) Karburatuta
     gt60mfrod D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    85 3660 12′ GT60F GT60
    85 4270 14′ GT60F GT60
    85 6100 20′ GT60F GT60
    MF-Tube GT60 – GT60 – Rd 76 2-1/4″ HARIA TRAPEZOIDALA (60mm) X 3″ BORONDA (76mm) Karburatuta
     gt60mftube D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    76 1220 4′ GT60F GT60
    76 1525 5′ GT60F GT60
    76 1830 6′ GT60F GT60
    76 2440 8′ GT60F GT60
    76 3050 10′ GT60F GT60
    76 3660 12′ GT60F GT60
    76 4270 14′ GT60F GT60
    76 5200 17′ 3/4″ GT60F GT60
    Botoi-bit Karburoaren dimentsioa Neurriak D Hustuketa-zuloa
    Neurgailua Aurrealdea
    [Ez.] [mm] [Ez.] [mm] [mm] [in] Aurrealdea Aldea
     ST68-1 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2″ 4 0
    Gida Retrac
     ST68-2 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2″ 4 0
    8 12 10 12 102 4″ 4 0
    Lan gogorra
     ST68-3 6 12 8 14 89 3 1/2″ 2 0
    Collaring bit
     ST68-4 8 16 9 16 152 6″ 3 0
    Retrac bit, Heavy Duty
     ST68-5 5 14 8 16 102 4″ 2 0
    Pixka bat errematatzen
     ST68-6 4 16 8 16 152 4 1/2″ 4
    9 16 9 16 204 5″ 3 0
    9 16 9 18 254 4 1/2″ 3 0

     

     ST68 D LUZERA (L) HARIA
    mm FT Lifit Eskuin
    87 1525 5′ ST68F ST68
    87 1830 6′ ST68F ST68

    Lotutako produktuak

    Txandakako egokitzaileak

    Txandakako egokitzaileak

    Zulatzeko hagatxoa

    Zulatzeko hagatxoa

    Hari botoi-bitak

    Hari botoi-bitak

    WhatsApp Online Txata!