Isistimu yezikhonkwane zokuzibhoboza

Isistimu yehange lokuzibhoboza Isithombe esifakiwe
  • Isistimu yezikhonkwane zokuzibhoboza
  • Isistimu yezikhonkwane zokuzibhoboza
  • Isistimu yezikhonkwane zokuzibhoboza
  • Isistimu yezikhonkwane zokuzibhoboza
  • Isistimu yezikhonkwane zokuzibhoboza

Incazelo emfushane:

I-anchoring isetshenziswa kakhulu emhubheni wokwesekwa kwangaphambili, emthambekeni, ogwini, emayini, kumaphrojekthi okonga amanzi, Isisekelo sokwakha, ukuqinisa umbhede womgwaqo kanye nokwelashwa okunephutha okufana ne-landslip, crack, kanye neminyaka yokucwila, ayinakushintshwa endaweni ewumngcingo yokwakha.UBUHLE I-Self Drilling Bar Hollow Anchor System: Ihlanganisa ibha enentambo engenalutho exhunywe ne-drill bit eyenza ukubhola.Ibha engenalutho ivumela umoya namanzi ukuthi kudlule ngokukhululekile kubha ngesikhathi sokumba ukuze kukhishwe...


Landa njenge-PDF

Imininingwane Yomkhiqizo

R25 Self Drilling Anchor

R32 Self Drilling Anchor

R38 Self Drilling Anchor

R51 Self Drilling Anchor

I-T30 Self Drilling Anchor

I-T40 Self Drilling Anchor

I-T52 Self Drilling Anchor

I-T76 Self Drilling Anchor

Omaka bomkhiqizo

I-anchoring isetshenziswa kakhulu emhubheni wokwesekwa kwangaphambili, emthambekeni, ogwini, emayini, kumaphrojekthi okonga amanzi, Isisekelo sokwakha, ukuqinisa umbhede womgwaqo kanye nokwelashwa okunephutha okufana ne-landslip, crack, kanye neminyaka yokucwila, ayinakushintshwa endaweni ewumngcingo yokwakha.

UBUHLE

I-Self Drilling I-Hollow Bar Anchor System:

Ihlanganiswe nebha enentambo engenalutho enamathiselwe ne-drill bit eyenza ukubhola.Ibha engenalutho ivumela umoya namanzi ukuba kudlule ngokukhululekile ku-bar ngesikhathi sokumba ukuze kukhishwe imfucumfucu, ngemva kokubhoboza ekujuleni okudingekayo kuqediwe, i-grout igcwalisa ibha engenalutho ngokusebenzisa ingcindezi yemfuneko yabo futhi imboze ngokuphelele yonke ibhawodi.

I-Coupler: I-coupler ingasetshenziswa ukuhlanganisa imigoqo engenalutho futhi inwebe ubude bebhawodi, kusho ukuthi ihange linganwetshwa nezixhumi.

Ipuleti namantongomane: Ipuleti namantongomane afakwe ngokwezidingo zawo zokuklama.

I-Drill bit: I-drill bit izokhethwa ekukhetheni isimo somhlabathi.

  • Okwedlule:
  • Olandelayo:

    • R25 Self Drilling Anchor

     

    Ibha Yehange Elingenalutho
    Usayizi I-Dia yangaphandle. I-Inner Dia. Ultimate Load Yield Load Isisindo
    (mm) (mm) (kN) (kN) (Kg/m)
    R25-12 25 12 200 150 2.35

     

    I-Drill Bit
    Uhlobo I-Dia yangaphandle. Isisindo Ibanga lesicelo (Iseluleko)
    (mm) (intshi) (Kg)
    I-Cast cross bit 42 1.65 0.35 Faka i-cross bit ukuze uthole isihlabathi namatshe
    51 2 0.38
    Insimbi yesiphambano 42 1.65 0.3 I-cross bit eqinile ukuze ikhululeke ukuya kwezimo eziminyene kakhulu ezinamatshe amancane.
    51 2 0.4
    I-TC cross bit 42 1.65 0.35 I-TC cross bit yokwakheka kwamatshe athambile kuya kwamaphakathi
    51 2 0.45

     

    Umbhangqwana
    Usayizi I-Dia yangaphandle. Ubude Isisindo Qaphela
    (mm) (mm) (Kg/pc)
    R25-S 36 150 0.66 Ngesakhiwo sokubeka uphawu
    R25-E 36 150 0.66 Ngaphandle kokubeka uphawu

    I-Hex Nut
    Usayizi Usayizi Obalulekile Ubude Isisindo Ukuqina
    (mm) (mm) (Kg/pc) (HRC)
    R25-S 41 30 0.2 25-30

    I-Domed Plate
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    R25-E 150×150 8 30 1.4
    150×150 5 28 0.85
    200×200 8 32 3.2

    R32 Self Drilling Anchor

    Ibha Yehange Elingenalutho
    Usayizi I-Dia yangaphandle. I-Inner Dia. Ultimate Load Yield Load Isisindo
    (mm) (mm) (kN) (kN) (Kg/m)
    S-R32/20 32 20 210 160 2.83
    S-R32/17 32 17 280 230 3.5
    S-R32/15 32 15 360 280 4
    E-R32/21 32 21 210 160 2.6
    E-R32/19 32 19 280 230 2.95
    E-R32/17 32 17 360 280 3.5
    E-R32/15 32 15 405 320 4
    C-R32/21 32 21 250 190 2.6
    C-R32/20 32 20 280 230 2.83
    C-R32/17.5 32 17.5 360 280 3.4

     

    I-Drill Bit
    Uhlobo I-Dia yangaphandle. Isisindo Ibanga lesicelo (Iseluleko)
    (mm) (Kg)
    I-Cast cross bit 51 mm 0.99 Faka i-cross bit ukuze uthole isihlabathi namatshe
    Insimbi yesiphambano 51 mm 0.88 Ibhithi yensimbi eqinile ukuze kube nezimo zomhlabathi eziminyene kakhulu
    76 mm 2.87
    Insimbi 3 cutter bit 76 mm 2.65
    I-TC cross bit 51 mm 0.99 I-TC insert bit for soft to medium rock formations
    I-TC 3 cutter bit 76 mm 2.87
    Insimbi ene-arched bit 51 mm 0.99 Ibhithi eliqinile eliqinile lejiyomethri elungiselelwe inhlabathi engahlanganisiwe enamatshe amancane
    I-TC i-arched bit 51 mm 0.99 I-TC i-arched bit yejiyomethri ethuthukisiwe yokwakheka kwamatshe athambile ukuya kwamaphakathi
    Ibhithi yenkinobho yensimbi 51 mm 1.32 Ibhithi yenkinobho eqinile yedwala elingahlanganisiwe elinamatshe
    Ibhithi yenkinobho ye-TC 51 mm 1.43 I-TC yenkinobho yokufaka ibhithi yokwakheka kwetshe elimaphakathi
    EX kancane 51 mm 0.88 I-hardened cross cut drill bit, ilungele iningi lezinhlelo zokusebenza ezihlanganisa amabhande amancane edwala elithambile.
    EXX bit(okunye) 51 mm 1.1 I-EXX iwumshini wokubhola onzima kakhulu otholakalayo, wamatshe aqinile, ama-hard seam kanye nezinyawo zikakhonkolo.

     

    Umbhangqwana
    Usayizi I-Dia yangaphandle. Ubude Isisindo Qaphela
    (mm) (mm) (Kg/pc)
    I-SSR32 42 145 0.79 Ngesakhiwo sokubeka uphawu
    42 160 0.86
    42 190 1
    I-SER32 42 145 0.77 Ngaphandle kokubeka uphawu
    42 160 0.84
    42 190 1

     

    I-Hex Nut
    Usayizi Usayizi Obalulekile Ubude Isisindo Ukuqina
    (mm) (mm) (Kg/pc) (HRC)
    I-SSR32 46 45 0.37 25-30
    46 55 0.46
    46 60 0.47

     

    I-Domed Plate
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    R32-E 150×150 8 35 1.3
    150×150 5 35 0.85
    150×150 6 35 1
    150×150 10 35 1.7
    175×175 8 35 1.9
    200×200 8 35 2.6
    200×200 10 35 3.52
    200×200 12 35 2.94

     

    Ipuleti le-anchor
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    E-R32 95x95 25 35 1.6
    120×120 30 35 3.2
    150×150 8 35 1.3
    200×200 10 35 3.06

    R38 Self Drilling Anchor

    Ibha Yehange Elingenalutho
    Usayizi I-Dia yangaphandle. I-Inner Dia. Ultimate Load Yield Load Isisindo
    (mm) (mm) (kN) (kN) (Kg/m)
    S-R38/20 38 20 500 400 5.5
    E-R38/22 38 22 500 400 4.95
    E-R38/18 38 18 550 430 6
    C-R38/22.5 38 22.5 500 400 4.8
    C-R38/21 38 21 500 400 5.25

     

    I-Drill Bit
    Uhlobo I-Dia yangaphandle. Isisindo Ibanga lesicelo (Iseluleko)
    (mm) (Kg)
    Insimbi yesiphambano 76 mm 1.2 I-cross bit eqinile ukuze ikhululeke ukuya kwezimo eziminyene kakhulu ezinamatshe amancane
    90 mm 1.4
    Insimbi ene-arched bit 76 mm 1.2 Ibhithi eliqinile eliqinile lejiyomethri elungiselelwe inhlabathi engahlanganisiwe enamatshe amancane
    I-TC i-arched bit 115 mm 2.85 I-TC i-arched bit yejiyomethri ethuthukisiwe yokwakheka kwamatshe athambile ukuya kwamaphakathi
    I-TC cross bit 76 mm 1.25 I-TC cross bit yokwakheka kwamatshe athambile kuya kwamaphakathi
    90 mm 1.45
    I-TC 3 cutter bit 76 mm 0.85 I-TC insert bit for soft to medium rock formations
    Ibhithi yenkinobho yensimbi 76 mm 1 Ibhithi yenkinobho eqinile yedwala elingahlanganisiwe elinamatshe
    Ibhithi yenkinobho ye-TC 76 mm 1 Ibhithi yenkinobho yokufaka i-TC yokwakheka kwetshe okumaphakathi

     

    Umbhangqwana
    Usayizi I-Dia yangaphandle. Ubude Isisindo Qaphela
    (mm) (mm) (Kg/pc)
    S-R38 51 180 1.33 Ngesakhiwo sokubeka uphawu
    51 200 1.5
    51 220 1.67
    E-R38 51 180 1.38 Ngaphandle kokubeka uphawu
    51 200 1.55
    51 220 1.68

     

    I-Hex Nut
    Usayizi Usayizi Obalulekile Ubude Isisindo Ukuqina
    (mm) (mm) (Kg/pc) (HRC)
    S-R38 50 60 1.47 25-30

     

    I-Domed Plate
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    E-R38 150×150 8 41 3.6
    200×200 12 41 1.38

     

    Ipuleti le-anchor
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    E-R38 140×140 35 41 5
    150×150 25 41 4.1
    200×200 12 41 3.67

    R51 Self Drilling Anchor

    Ibha Yehange Elingenalutho
    Usayizi I-Dia yangaphandle. I-Inner Dia. Ultimate Load Yield Load Isisindo
    (mm) (mm) (kN) (kN) (Kg/m)
    S-R51/34 51 34 580 450 6.95
    S-R51/29 51 29 800 630 9
    E-R51/36 51 36 550 430 6.15
    E-R51/35 51 35 580 450 6.4
    E-R51/31 51 31 800 630 8.2
    C-R51/33 51 33 800 630 8

     

    I-Drill Bit
    Uhlobo I-Dia yangaphandle. Isisindo Ibanga lesicelo (Iseluleko)
    (mm) (Kg)
    Insimbi yesiphambano 85 mm 1.3 I-cross bit eqinile ukuze ikhululeke ukuya kwezimo eziminyene kakhulu ezinamatshe amancane
    I-TC cross bit 115 mm 1.8 I-TC cross bit yokwakheka kwamatshe athambile kuya kwamaphakathi
    Ibhithi yenkinobho yensimbi 100 mm 1.85 Ibhithi yenkinobho yokufaka i-TC yetshe elingahlanganisiwe elinamatshe
    115 mm 2
    Ibhithi yenkinobho ye-TC 100 mm 1.85 Ibhithi yenkinobho yokufaka i-TC yokwakheka kwetshe okumaphakathi

     

    Umbhangqwana
    Usayizi I-Dia yangaphandle. Ubude Isisindo Qaphela
    (mm) (mm) (Kg/pc)
    S-R51 63 200 1.85 Ngesakhiwo sokubeka uphawu
    63 220 2
    E-R51 63 200 1.84 Ngaphandle kokubeka uphawu
    63 220 2.13

     

    I-Hex Nut
    Usayizi Usayizi Obalulekile Ubude Isisindo Ukuqina
    (mm) (mm) (Kg/pc) (HRC)
    S-R51 75 70 1.53 25-30
    75 80 1.84

     

    I-Domed Plate
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    E-R38 200×200 15 55 4.7

     

    Ipuleti le-anchor
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    E-R51 150×150 40 56 6.2
    180×180 45 56 10.5
    200×200 30 60 8.72
    250×250 40 60 18.9

    I-T30 Self Drilling Anchor

    Ibha Yehange Elingenalutho
    Usayizi I-Dia yangaphandle. I-Inner Dia. Ultimate Load Yield Load Isisindo
    (mm) (mm) (kN) (kN) (Kg/m)
    I-S-T30/16 30 16 220 180 2.9
    I-S-T30/14 30 14 260 220 3.35
    I-S-T30/11 30 11 320 260 3.6
    E-T30/14 30 14 320 260 3.35

     

    I-Drill Bit
    Uhlobo I-Dia yangaphandle. Isisindo Ibanga lesicelo (Iseluleko)
    (mm) (Kg)
    I-cross bit eqinile 42 mm 0.30kg I-cross bit eqinile ukuze kube nezimo zomhlabathi eziminyene kakhulu
    46 mm 0.32kg
    51 mm 0.40kg
    76 mm 0.56kg
    I-TC cross bit 42 mm 0.30kg I-TC cross bit yokwakheka kwamatshe athambile kuya kwamaphakathi
    46 mm 0.32kg
    51 mm 0.40kg
    Ibhithi yenkinobho eqinile 42 mm 0.30kg Ibhithi yenkinobho eqinile yedwala elingahlanganisiwe elinamatshe
    46 mm 0.32kg
    51 mm 0.40kg
    Ibhithi yenkinobho ye-TC 46 mm 0.45kg Inkinobho ye-TC bit for medium rock formations
    51 mm 0.69kg

     

    Umbhangqwana
    Usayizi I-Dia yangaphandle. Ubude Isisindo Qaphela
    (mm) (mm) (Kg/pc)
    I-S-T30 38 105 0.39 Ngesakhiwo sokubeka uphawu
    E-T30 38 105 0.45 Ngaphandle kokubeka uphawu

     

    I-Hex Nut
    Usayizi Usayizi Obalulekile Ubude Isisindo Ukuqina
    (mm) (mm) (Kg/pc) (HRC)
    I-S-T30 46 35 0.31 25-30

     

    I-Spherical Collar Nut
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    I-S-T30 46 35 0.33 290-340

     

    Ipuleti le-anchor
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    I-S-T30 150×150 25 40 4.2
    200×200 8 36 2.43

    I-T40 Self Drilling Anchor

    Ibha Yehange Elingenalutho
    Usayizi I-Dia yangaphandle. I-Inner Dia. Ultimate Load Yield Load Isisindo
    (mm) (mm) (kN) (kN) (Kg/m)
    I-S-T40/20 40 20 539 430 6.2
    I-S-T40/16 40 16 660 525 7.2
    I-E-T40/22 40 22 539 430 5.7
    E-T40/18 40 18 660 525 6.8

     

    I-Drill Bit
    Uhlobo I-Dia yangaphandle. Isisindo Ibanga lesicelo (Iseluleko)
    (mm) (Kg)
    I-cross bit eqinile 76 mm 0.90kg I-cross bit eqinile ukuze kube nezimo zomhlabathi eziminyene kakhulu
    90mm 1.5kg
    100mm 1.65kg
    115 mm 2.6kg
    I-TC cross bit 76 mm 1.2kg I-TC cross bit yokwakheka kwamatshe athambile kuya kwamaphakathi
    90mm 1.75kg
    100mm 2kg
    115 mm 2.8kg
    130 mm 3.1kg
    150mm 5kg
    I-cross bit eqinile 76 mm 1.15kg Ibhithi yenkinobho eqinile yedwala elingahlanganisiwe elinamatshe
    90mm 1.68kg
    100mm 2.15kg
    115 mm 2.3kg
    130 mm 3.15kg
    Ibhithi yenkinobho ye-TC 76 mm 1.78kg Inkinobho ye-TC bit for medium rock formations
    90mm 1.4kg
    100mm 2kg
    115 mm 2.8kg
    130 mm 4.92kg

     

    Umbhangqwana
    Usayizi I-Dia yangaphandle. Ubude Isisindo Qaphela
    (mm) (mm) (Kg/pc)
    I-S-T40 54 140 1.09 Ngesakhiwo sokubeka uphawu
    57 140 1.37
    E-T40 54 140 1.11 Ngaphandle kokubeka uphawu
    57 140 1.39

     

    I-Hex Nut
    Usayizi Usayizi Obalulekile Ubude Isisindo Ukuqina
    (mm) (mm) (Kg/pc) (HRC)
    I-S-T40 65 50 0.92 25-30

     

    I-Spherical Collar Nut
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    I-S-T40 65 50 0.86 290-340

     

    Ipuleti le-anchor
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    I-S-T40 115×115 20 56 1.6
    125×125 24 56 2.4
    200×200 12 56 3.28
    200×200 30 56 8.5

    I-T52 Self Drilling Anchor

    Ibha Yehange Elingenalutho
    Usayizi I-Dia yangaphandle. I-Inner Dia. Ultimate Load Yield Load Isisindo
    (mm) (mm) (kN) (kN) (Kg/m)
    I-S-T52/24 52 24 929 730 10.2
    I-S-T52/26 52 26 929 730 9.7

    Umbhangqwana
    Usayizi I-Dia yangaphandle. Ubude Isisindo Qaphela
    (mm) (mm) (Kg/pc)
    I-S-T52 70 160 2.31 Ngesakhiwo sokubeka uphawu
    E-T52 70 160 2.46 Ngaphandle kokubeka uphawu

    I-Hex Nut
    Usayizi Usayizi Obalulekile Ubude Isisindo Ukuqina
    (mm) (mm) (Kg/pc) (HRC)
    I-S-T52 80 70 1.94 25-30

    I-Spherical Collar Nut
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    I-S-T52 80 70 2.3 290-340

    Ipuleti le-anchor
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    I-SST52 145×145 27 65 3.6
    200×200 30 65 8.59
    220×220 35 65 13.1

    I-T76 Self Drilling Anchor

    Ibha Yehange Elingenalutho
    Usayizi I-Dia yangaphandle. I-Inner Dia. Ultimate Load Yield Load Isisindo
    (mm) (mm) (kN) (kN) (Kg/m)
    E-T76/51 76 51 1600 1200 16.5
    E-T76/45 76 45 1900 1500 19.7

    Umbhangqwana
    Usayizi I-Dia yangaphandle. Ubude Isisindo Qaphela
    (mm) (mm) (Kg/pc)
    I-S-T76 95 200 4.26 Ngesakhiwo sokubeka uphawu
    95 220 4.8

    I-Hex Nut
    Usayizi Usayizi Obalulekile Ubude Isisindo Ukuqina
    (mm) (mm) (Kg/pc) (HRC)
    I-S-T76 100 75 2.4 25-30
    100 80 2.67

    I-Spherical Collar Nut
    Usayizi Usayizi Obalulekile Ubude Isisindo
    (mm) (mm) (Kg/pc)
    E-T76 95 70 1.9

    Ipuleti le-anchor
    Usayizi Ubukhulu Ubukhulu I-Hole Dia. Isisindo
    (mm) (mm) (mm) (Kg/pc)
    I-S-T76 250×250 60 80 27
    250×250 40 80 18

    Imikhiqizo Ehlobene

    I-Self Drilling Hollow Anchor Rock Bolt System

    I-Self Drilling Hollow Anchor Rock Bolt System

    I-Friction stabilizer

    I-Friction stabilizer

    I-ring bit Tunnel Forepoling Casing Advance

    I-ring bit Tunnel Forepoling Casing Advance

    I-Hydraulic Expansion Anchor

    I-Hydraulic Expansion Anchor

    Ingxoxo ye-WhatsApp Online!