Water Well Drilling Middle-Low Air Pressure DTH Hammers – Kat
Water Well Drilling Middle-Low Air Pressure DTH Hammers – Kat Detail:
BRIA、BR2A and BR3A series DTH Hammers are designed to operate efficiently at low air pressures and medium air pressures, using BR series bits.
The main features are as follows:
1. The operating air pressures are between 0.7Mpa and 1.75Mpa.
2. Valveless hammers.
3. Simple structure, easy to assemble and to disassemble, long life.
4. Higher impact frequency and faster drilling speed.
5. lower air consumption and lower oil consumption. A hole can be drilled on the check valve to provide more efficient cuttings discharge.
6. Especially suitable for quarrying.
Product detail pictures:
Related Product Guide:
Geothermal – Geothermal Pilot Project in Finland Reaches Stimulation Stage | Borehole Hammer
The Curse of Oak Island recap: First evidence of French presence on Oak Island uncovered | Guide Tube Gt60
Water Well Drilling Middle-Low Air Pressure DTH Hammers – Kat, The product will supply to all over the world, such as: , , ,
By from -
By from -
