SR35 Thread Button Bit Rock Drill Bits
The key to our success is “Good Products Good quality, Reasonable Value and Efficient Service” for T38 Thread Button Bit Rock Drill Bits, We have been prepared to offer you the top suggestions on the designs of one’s orders in a professional way if you need. During the meantime, we retain on developing new technologies and building new designs so as for making you ahead within the line of this business.
The key to our success is “Good Products Good quality, Reasonable Value and Efficient Service” for China Thread Bit and Thread Button Bit, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
Drifting and tunnelling tools include rods, shank adapters, couplings and bits. We have mainly 3 threads: R25, R28 and R32. Diameter: 38-127mm,They can be used with button bits, cross bits and reaming products.
| DRIFTING AND TUNNELING-R22 |
 |
| DRIFTING AND TUNNELING-R25 |
 |
| DRIFTING AND TUNNELING-R28 |
 |
| DRIFTING AND TUNNELING-R32 |
 |
| DRIFTING AND TUNNELING-R35 |
 |
Thread button bits made with high quality of best quality alloy steel bar and tungsten carbides, through heat treatment so that it can withstand the toughest rock drilling demands，and transmit intensive impact energy into the rock with the least possible loss of energy
Especially our BIT R28 37mm，R28 38mm,R32 45mm,R32 x 48 mm,BIT R32 51mm, Button Bit ,Retrac Bit, which is widely welcomed by our client with good quality and good price .
Especially our H35，TUN ROD T38-Hex35-R32，ROD R32 H28 R28，MF rod, which is widely welcomed by our client with good quality and good price .
| Button bit | Carbide dimension | Dimensions D | Flushing hole | |||||
| Gauge | Front | |||||||
| [No.] | [mm] | [No.] | [mm] | [mm] | [in] | Front | Side | |
 |
5 | 7 | 2 | 7 | 32 | 1 1/4″ | 1 | 1 |
| 5 | 7 | 2 | 7 | 32 | 1 1/4″ | 1 | 1 | |
| 5 | 8 | 2 | 7 | 34 | 1 11/32″ | 1 | 1 | |
| 5 | 8 | 2 | 7 | 34 | 1 11/32″ | 1 | 1 | |
| 5 | 8 | 2 | 7 | 35 | 1 3/8″ | 1 | 1 | |
| 5 | 9 | 2 | 7 | 38 | 1 1/2″ | 1 | 1 | |
| 5 | 9 | 2 | 9 | 41 | 1 5/8″ | 1 | 1 | |
| 5 | 9.5 | 2 | 8 | 43 | 1 11/16″ | 1 | 1 | |
| 5 | 10 | 2 | 9 | 45 | 1 3/4″ | 1 | 1 | |
| R22 Cross bit | Carbide dimension | Dimensions D | Flushing hole | |||
| Width | Height | |||||
| [mm] | [mm] | [mm] | [in] | Front | Side | |
 |
8 | 14 | 35 | 1 3/8″ | 1 | 4 |
| 8 | 14 | 38 | 1 1/2″ | 1 | 4 | |
| 8 | 14 | 41 | 1 5/8″ | 1 | 4 | |
| HEX EXTENSION ROD R22 - R22 - HEX 22 7/8″ ROPE THREAD (22mm) X 7/8″ HEX (22mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 22 | 610 | 2′ | R22 | R22 | |
| HEX 22 | 915 | 3′ | R22 | R22 | |
| HEX 22 | 1220 | 4′ | R22 | R22 | |
| HEX 22 | 1525 | 5′ | R22 | R22 | |
| HEX 22 | 1830 | 6′ | R22 | R22 | |
| Shank rod R22 7/8″ ROPE THREAD (22mm) X 7/8″ HEX (22mm), 4-1/4″ SHANK (108mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 22 | 255 | 10″ | SHANK (108mm) | R22 | |
| HEX 22 | 1000 | 3′ 3″ | SHANK (108mm) | R22 | |
| HEX 22 | 1800 | 5′ 11″ | SHANK (108mm) | R22 | |
| Button bit | Carbide dimension | Dimensions D | Flushing hole | |||||
| Gauge | Front | |||||||
| [No.] | [mm] | [No.] | [mm] | [mm] | [in] | Front | Side | |
 |
5 | 7 | 2 | 7 | 32 | 1 1/4″ | 1 | 1 |
| 5 | 7 | 2 | 7 | 33 | 1 5/16″ | 1 | 1 | |
| 5 | 8 | 2 | 7 | 35 | 1 3/8″ | 1 | 1 | |
| 5 | 8 | 2 | 7 | 36 | 1 13/32″ | 1 | 1 | |
| 5 | 9 | 2 | 7 | 38 | 1 1/2″ | 1 | 1 | |
| 5 | 9 | 2 | 9 | 41 | 1 5/8″ | 1 | 1 | |
| 5 | 9.5 | 2 | 8 | 43 | 1 11/16″ | 1 | 1 | |
| 5 | 10 | 2 | 9 | 45 | 1 3/4″ | 1 | 1 | |
| 5 | 11 | 2 | 9 | 48 | 1 7/8″ | 1 | 1 | |
| 5 | 11 | 2 | 10 | 51 | 2″ | 1 | 1 | |
 |
6 | 9 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 |
| 6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 | |
| 6 | 10 | 3 | 9.5 | 51 | 2″ | 3 | 1 | |
| 6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 | |
| 6 | 10 | 3 | 10 | 60 | 2 3/8″ | 3 | 1 | |
| Flat Face / Retrac | ||||||||
 |
5 | 9 | 2 | 9 | 41 | 1 5/8″ | 1 | 1 |
| 5 | 9.5 | 2 | 8 | 43 | 1 11/16″ | 1 | 1 | |
| 5 | 10 | 2 | 9 | 45 | 1 3/4″ | 1 | 1 | |
| Flat Face / Retrac | ||||||||
 |
6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 |
| 6 | 10 | 3 | 9.5 | 51 | 2″ | 3 | 1 | |
| 6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 | |
| 6 | 10 | 3 | 10 | 60 | 2 3/8″ | 3 | 1 | |
| R25 Cross bit | Carbide dimension | Dimensions D | Flushing hole | |||
| Width | Height | |||||
| [mm] | [mm] | [mm] | [in] | Front | Side | |
 |
8 | 14 | 35 | 1 3/8″ | 1 | 4 |
| 8 | 14 | 38 | 1 1/2″ | 1 | 4 | |
| 8 | 14 | 41 | 1 5/8″ | 1 | 4 | |
| 8 | 14 | 43 | 1 11/16″ | 1 | 4 | |
| 8 | 14 | 45 | 1 3/4″ | 1 | 4 | |
| 9.5 | 19 | 48 | 1 7/8″ | 1 | 4 | |
| 9.5 | 19 | 51 | 2″ | 1 | 4 | |
| 9.5 | 19 | 57 | 2 1/4″ | 1 | 4 | |
| HEX EXTENSION ROD R25 - R25 - HEX 25 1″ ROPE THREAD (25mm) X 1″ HEX (25mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 25 | 610 | 2′ | R25 | R25 | |
| HEX 25 | 915 | 3′ | R25 | R25 | |
| HEX 25 | 1000 | 3′ 3″ | R25 | R25 | |
| HEX 25 | 1220 | 4′ | R25 | R25 | |
| HEX 25 | 1500 | 4′ 11″ | R25 | R25 | |
| HEX 25 | 1525 | 5′ | R25 | R25 | |
| HEX 25 | 1830 | 6′ | R25 | R25 | |
| HEX 25 | 2100 | 6′ 10-1/2″ | R25 | R25 | |
| HEX 25 | 2435 | 8′ | R25 | R25 | |
| HEX 25 | 3050 | 10′ | R25 | R25 | |
| HEX 25 | 3660 | 12′ | R25 | R25 | |
| HEX 25 | 4305 | 14′ 1-1/2″ | R25 | R25 | |
| HEX Drifter rod R25 - R32 - HEX 25 1″ ROPE THREAD (25mm) X 1-1/4″ ROPE THREAD (32mm) X 1″ HEX (25mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 25 | 610 | 2′ | R32 | R25 | |
| HEX 25 | 1830 | 6′ | R32 | R25 | |
| HEX 25 | 2130 | 7′ | R32 | R25 | |
| HEX 25 | 2475 | 8′ 1-1/2″ | R32 | R25 | |
| HEX 25 | 2600 | 8′ 6″ | R32 | R25 | |
| HEX 25 | 2795 | 9′ 2″ | R32 | R25 | |
| HEX 25 | 2895 | 9′ 6″ | R32 | R25 | |
| HEX 25 | 3090 | 10′ 1-1/2″ | R32 | R25 | |
| HEX 25 | 3700 | 12′ 1-1/2″ | R32 | R25 | |
| HEX 25 | 4005 | 13′ 1-1/2″ | R32 | R25 | |
| HEX 25 | 4305 | 14′ 1-1/2″ | R32 | R25 | |
| HEX Drifter rod R25 - R32 - HEX 28 1″ ROPE THREAD (25mm) X 1-1/4″ ROPE THREAD (32mm) X 1-1/8″ HEX (28mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 28 | 2475 | 8′ 1-1/2″ | R32 | R25 | |
| HEX 28 | 2600 | 8′ 6″ | R32 | R25 | |
| HEX 28 | 2795 | 9′ 2″ | R32 | R25 | |
| HEX 28 | 2850 | 9′ 4″ | R32 | R25 | |
| HEX 28 | 3090 | 10′ 1-1/2″ | R32 | R25 | |
| HEX 28 | 3700 | 12′ 1-1/2″ | R32 | R25 | |
| HEX 28 | 4005 | 13′ 1-1/2″ | R32 | R25 | |
| HEX 28 | 4305 | 14′ 1-1/2″ | R32 | R25 | |
| HEX Drifter rod R25 - R38 - HEX 28 1″ ROPE THREAD (25mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/8″ HEX (28mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 28 | 2000 | 6′ 7″ | R38 | R25 | |
| HEX 28 | 3090 | 10′ 1-1/2″ | R38 | R25 | |
| HEX 28 | 3700 | 12′ 1-1/2″ | R38 | R25 | |
| HEX 28 | 4050 | 13′ 3-1/2″ | R38 | R25 | |
| HEX 28 | 4305 | 14′ 1-1/2″ | R38 | R25 | |
| Shank rod R25 1″ ROPE THREAD (25mm) X 7/8″ HEX (22mm), 4-1/4″ SHANK (108mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 22 | 255 | 10″ | SHANK (108mm) | R25 | |
| HEX 22 | 610 | 2′ | SHANK (108mm) | R25 | |
| HEX 22 | 800 | 2′ 7″ | SHANK (108mm) | R25 | |
| HEX 22 | 915 | 3′ | SHANK (108mm) | R25 | |
| HEX 22 | 1000 | 3′ 3″ | SHANK (108mm) | R25 | |
| HEX 22 | 1220 | 4′ | SHANK (108mm) | R25 | |
| HEX 22 | 1830 | 6′ | SHANK (108mm) | R25 | |
| HEX 22 | 2400 | 7′ 10″ | SHANK (108mm) | R25 | |
| HEX 22 | 3050 | 10′ | SHANK (108mm) | R25 | |
| HEX 22 | 3200 | 10′ 6″ | SHANK (108mm) | R25 | |
| HEX 22 | 3660 | 12′ | SHANK (108mm) | R25 | |
| HEX 22 | 4265 | 14′ | SHANK (108mm) | R25 | |
| Shank rod R25 1″ ROPE THREAD (25mm) X 1″ HEX (25mm), 4-1/4″ SHANK (108mm) | |||||
| |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 25 | 255 | 10″ | SHANK (108mm) | R25 | |
| HEX 25 | 610 | 2′ | SHANK (108mm) | R25 | |
| HEX 25 | 915 | 3′ | SHANK (108mm) | R25 | |
| HEX 25 | 1220 | 4′ | SHANK (108mm) | R25 | |
| HEX 25 | 1525 | 5′ | SHANK (108mm) | R25 | |
| HEX 25 | 1830 | 6′ | SHANK (108mm) | R25 | |
| HEX 25 | 2440 | 8′ | SHANK (108mm) | R25 | |
| HEX 25 | 3050 | 10′ | SHANK (108mm) | R25 | |
| HEX 25 | 3660 | 12′ | SHANK (108mm) | R25 | |
| Button bit | Carbide dimension | Dimensions D | Flushing hole | |||||
| Gauge | Front | |||||||
| [No.] | [mm] | [No.] | [mm] | [mm] | [in] | Front | Side | |
 |
5 | 8 | 2 | 7 | 36 | 1 13/32″ | 1 | 3 |
| 5 | 8 | 2 | 8 | 38 | 1 1/2″ | 1 | 3 | |
| 5 | 9 | 2 | 7 | 38 | 1 1/2″ | 1 | 1 | |
| 5 | 9 | 2 | 9 | 41 | 1 5/8″ | 1 | 1 | |
| 5 | 9.5 | 2 | 8 | 43 | 1 11/16″ | 1 | 1 | |
| 5 | 10 | 2 | 9 | 45 | 1 3/4″ | 1 | 1 | |
| 5 | 11 | 2 | 9 | 48 | 1 7/8″ | 1 | 1 | |
 |
6 | 8 | 2 | 8 | 43 | 1 11/16″ | 2 | 0 |
| 6 | 9 | 2 | 9 | 45 | 1 3/4″ | 2 | 0 | |
 |
6 | 9 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 |
| 6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 | |
| 6 | 10 | 3 | 9.5 | 51 | 2″ | 3 | 1 | |
| R28/SR28 Cross bit | Carbide dimension | Dimensions D | Flushing hole | |||
| Width | Height | |||||
| [mm] | [mm] | [mm] | [in] | Front | Side | |
 |
8 | 14 | 35 | 1 3/8″ | 1 | 4 |
| 8 | 14 | 38 | 1 1/2″ | 1 | 4 | |
| 8 | 14 | 41 | 1 5/8″ | 1 | 4 | |
| 8 | 14 | 45 | 1 3/4″ | 1 | 4 | |
| HEX EXTENSION ROD R28/SR28 - R28/SR28 - HEX 28 1-1/8″ ROPE THREAD (28mm) X 1-1/8″ HEX (28mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 28 | 610 | 2′ | R28 | R28/SR28 | |
| HEX 28 | 915 | 3′ | R28 | R28/SR28 | |
| HEX 28 | 1220 | 4′ | R28 | R28/SR28 | |
| HEX 28 | 1525 | 5′ | R28 | R28/SR28 | |
| HEX 28 | 1830 | 6′ | R28 | R28/SR28 | |
| HEX 28 | 2435 | 8′ | R28 | R28/SR28 | |
| HEX 28 | 3050 | 10′ | R28 | R28/SR28 | |
| HEX 28 | 3660 | 12′ | R28 | R28/SR28 | |
| HEX 28 | 3700 | 12′ 1-1/2″ | R28 | R28/SR28 | |
| HEX 28 | 4005 | 13′ 1-1/2″ | R28 | R28/SR28 | |
| HEX Drifter rod R28/SR28 - R32 - HEX 28 1-1/8″ ROPE THREAD (28mm) X 1-1/4″ ROPE THREAD (32mm) X 1-1/8″ HEX (28mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 28 | 1220 | 4′ | R32 | R28/SR28 | |
| HEX 28 | 1525 | 5′ | R32 | R28SR28 | |
| HEX 28 | 2475 | 8′ 1-1/2″ | R32 | R28/SR28 | |
| HEX 28 | 2590 | 8′ 6″ | R32 | R28/SR28 | |
| HEX 28 | 2795 | 9′ 2″ | R32 | R28/SR28 | |
| HEX 28 | 3090 | 10′ 1-1/2″ | R32 | R28/SR28 | |
| HEX 28 | 3400 | 11′ 2″ | R32 | R28/SR28 | |
| HEX 28 | 3700 | 12′ 1-1/2″ | R32 | R28/SR28 | |
| HEX 28 | 4005 | 13′ 1-1/2″ | R32 | R28/SR28 | |
| HEX 28 | 4305 | 14′ 1-1/2″ | R32 | R28/SR28 | |
| HEX Drifter rod R28 - R38 - HEX 28 1-1/8″ ROPE THREAD (28mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/8″ HEX (28mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 28 | 2475 | 8′ 1-1/2″ | R38 | R28/SR28 | |
| HEX 28 | 3090 | 10′ 1-1/2″ | R38 | R28/SR28 | |
| HEX 28 | 3700 | 12′ 1-1/2″ | R38 | R28/SR28 | |
| HEX 28 | 4305 | 14′ 1-1/2″ | R38 | R28/SR28 | |
| HEX Drifter rod R28 - T38 - HEX 28 1-1/8″ ROPE THREAD (28mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-1/8″ HEX (28mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 28 | 2475 | 8′ 1-1/2″ | T38 | R28/SR28 | |
| HEX 28 | 3090 | 10′ 1-1/2″ | T38 | R28/SR28 | |
| HEX 28 | 3300 | 10′ 10″ | T38 | R28/SR28 | |
| HEX 28 | 3700 | 12′ 1-1/2″ | T38 | R28/SR28 | |
| HEX 28 | 4305 | 14′ 1-1/2″ | T38 | R28/SR28 | |
| HEX Drifter rod R28 - R38 - HEX 32 1-1/8″ ROPE THREAD (28mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/4″ HEX (32mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 32 | 3090 | 10′ 1-1/2″ | R38 | R28/SR28 | |
| HEX 32 | 3700 | 12′ 1-1/2″ | R38 | R28/SR28 | |
| HEX 32 | 4005 | 13′ 1-1/2″ | R38 | R28/SR28 | |
| HEX 32 | 4305 | 14′ 1-1/2″ | R38 | R28/SR28 | |
| HEX 32 | 4915 | 16′ 1-1/2″ | R38 | R28/SR28 | |
| HEX 32 | 5525 | 18′ 1-1/2″ | R38 | R28/SR28 | |
| HEX Drifter rod R28 - T38 - HEX 32 1-1/8″ ROPE THREAD (28mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-1/4″ HEX (32mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 32 | 2475 | 8′ 1-1/2″ | T38 | R28/SR28 | |
| HEX 32 | 3090 | 10′ 1-1/2″ | T38 | R28/SR28 | |
| HEX 32 | 3400 | 11′ 2″ | T38 | R28/SR28 | |
| HEX 32 | 3700 | 12′ 1-1/2″ | T38 | R28/SR28 | |
| HEX 32 | 4305 | 14′ 1-1/2″ | T38 | R28/SR28 | |
| HEX 32 | 4915 | 16′ 1-1/2″ | T38 | R28/SR28 | |
| HEX 32 | 5150 | 16′ 10-3/4″ | T38 | R28/SR28 | |
| HEX 32 | 5525 | 18′ 1-1/2″ | T38 | R28/SR28 | |
| Button bit | Carbide dimension | Dimensions D | Flushing hole | |||||
| Gauge | Front | |||||||
| [No.] | [mm] | [No.] | [mm] | [mm] | [in] | Front | Side | |
 |
5 | 9 | 2 | 9 | 41 | 1 5/8″ | 1 | 1 |
| 5 | 9.5 | 2 | 8 | 43 | 1 11/16″ | 1 | 1 | |
| 5 | 9.5 | 2 | 9 | 43 | 1 11/16″ | 1 | 1 | |
| 5 | 10 | 2 | 9 | 45 | 1 3/4″ | 1 | 1 | |
| 5 | 11 | 2 | 9 | 48 | 1 7/8″ | 1 | 2 | |
| 5 | 11 | 2 | 10 | 51 | 2″ | 1 | 1 | |
 |
6 | 8 | 2 | 8 | 41 | 1 5/8″ | 2 | 0 |
| 6 | 8 | 2 | 8 | 41 | 1 5/8″ | 2 | 1 | |
| 6 | 8 | 2 | 8 | 43 | 1 11/16″ | 2 | 0 | |
| 6 | 9 | 2 | 9 | 45 | 1 3/4″ | 2 | 0 | |
| 6 | 9.5 | 2 | 9.5 | 48 | 1 7/8″ | 2 | 0 | |
| 6 | 11 | 2 | 9 | 51 | 2″ | 2 | 0 | |
 |
6 | 9 | 3 | 7 | 43 | 1 11/16″ | 3 | 1 |
| 6 | 9 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 | |
| 6 | 10 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 | |
| 6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 | |
| 6 | 10 | 3 | 8 | 48 | 1 7/8″ | 3 | 1 | |
| 6 | 11 | 3 | 9 | 51 | 2″ | 3 | 1 | |
| 6 | 10 | 3 | 9.5 | 54 | 2 1/8″ | 3 | 1 | |
| 6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 | |
 |
6 | 10 | 3 | 8 | 43 | 1 11/16″ | 3 | 1 |
| 6 | 9 | 3 | 7 | 43 | 1 11/16″ | 3 | 1 | |
| 6 | 10 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 | |
| 6 | 10 | 3 | 8 | 48 | 1 7/8″ | 3 | 1 | |
| Flat Face / Retrac | ||||||||
 |
6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 |
| 6 | 10 | 3 | 9.5 | 51 | 2″ | 3 | 1 | |
| 6 | 10 | 3 | 9.5 | 54 | 2 1/8″ | 3 | 1 | |
| 6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 | |
| Bench drilling | ||||||||
| Flat Face | ||||||||
 |
8 | 11 | 6 | 11 | 76 | 3″ | 2 | 0 |
| 8 | 10 | 4 | 10 | 64 | 2 1/2″ | 2 | 0 | |
| Drop Center | ||||||||
 |
6 | 10 | 3/1 | 10/9 | 64 | 2 1/2″ | 3 | 0 |
| 6 | 12.7 | 3/1 | 11 / 9.5 | 76 | 3″ | 3 | 0 | |
| Drop Center | ||||||||
 |
6 | 14 | 3/1 | 12.7 / 9.5 | 89 | 3 1/2″ | 3 | 0 |
| 6 | 14 | 3/1 | 12.7 / 9.5 | 89 | 3 1/2″ | 3 | 0 | |
| Flat Face / Retrac | ||||||||
 |
8 | 10 | 4 | 10 | 64 | 2 1/2″ | 2 | 0 |
| Flat Face / Retrac | ||||||||
 |
8 | 11 | 6 | 11 | 76 | 3″ | 2 | 0 |
| Drop Center / Retrac | ||||||||
 |
6 | 10 | 3/1 | 10/9 | 64 | 2 1/2″ | 3 | 0 |
| 6 | 12.7 | 3/1 | 10 / 9.5 | 76 | 3″ | 3 | 0 | |
| Drop Center / Retrac | ||||||||
 |
8 | 11 | 4/2 | 11 / 9.5 | 89 | 3 1/2″ | 4 | 1 |
| 8 | 11 | 4/2 | 11 / 9.5 | 89 | 3 1/2″ | 4 | 1 | |
| R32 Cross bit | Carbide dimension | Dimensions D | Flushing hole | |||
| Width | Height | |||||
| [mm] | [mm] | [mm] | [in] | Front | Side | |
 |
11.5 | 19 | 41 | 1 5/8″ | 1 | 4 |
| 9.5 | 19 | 43 | 1 11/16″ | 1 | 4 | |
| 11.5 | 19 | 45 | 1 3/4″ | 1 | 4 | |
| 9.5 | 19 | 48 | 1 7/8″ | 1 | 4 | |
| 9.5 | 19 | 51 | 2″ | 1 | 4 | |
| 9.5 | 19 | 57 | 2 1/4″ | 1 | 4 | |
| HEX EXTENSION ROD R32 - R32 - HEX 32 1-1/4″ ROPE THREAD (32mm) X 1-1/4″ HEX (32mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 32 | 1500 | 4′ 11″ | R32 | R32 | |
| HEX 32 | 2350 | 7′ 8-1/2″ | R32 | R32 | |
| HEX 32 | 2475 | 8′ 1-1/2″ | R32 | R32 | |
| HEX 32 | 2700 | 8′ 10″ | R32 | R32 | |
| HEX 32 | 3090 | 10′ 1-1/2″ | R32 | R32 | |
| HEX 32 | 3400 | 11′ 2″ | R32 | R32 | |
| HEX 32 | 3700 | 12′ 1-1/2″ | R32 | R32 | |
| HEX 32 | 4005 | 13′ 1-1/2″ | R32 | R32 | |
| HEX 32 | 4305 | 14′ 1-1/2″ | R32 | R32 | |
| HEX 32 | 4915 | 16′ 1-1/2″ | R32 | R32 | |
| HEX Drifter rod R32 - R38 - HEX 32 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/4″ HEX (32mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 32 | 1570 | 5′ 2″ | R38 | R32 | |
| HEX 32 | 1800 | 5′ 11″ | R38 | R32 | |
| HEX 32 | 2200 | 7′ 2-1/2″ | R38 | R32 | |
| HEX 32 | 2475 | 8′ 1-1/2″ | R38 | R32 | |
| HEX 32 | 3090 | 10′ 1-1/2″ | R38 | R32 | |
| HEX 32 | 3700 | 12′ 1-1/2″ | R38 | R32 | |
| HEX 32 | 4005 | 13′ 1-1/2″ | R38 | R32 | |
| HEX 32 | 4305 | 14′ 1-1/2″ | R38 | R32 | |
| HEX 32 | 4610 | 15′ 1-1/2″ | R38 | R32 | |
| HEX 32 | 4915 | 16′ 1-1/2″ | R38 | R32 | |
| HEX 32 | 5525 | 18′ 1-1/2″ | R38 | R32 | |
| HEX Drifter rod R32 - T38 - HEX 32 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-1/4″ HEX (32mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 32 | 2475 | 8′ 1-1/2″ | T38 | R32 | |
| HEX 32 | 2600 | 8′ 6″ | T38 | R32 | |
| HEX 32 | 3090 | 10′ 1-1/2″ | T38 | R32 | |
| HEX 32 | 3400 | 11′ 2″ | T38 | R32 | |
| HEX 32 | 3700 | 12′ 1-1/2″ | T38 | R32 | |
| HEX 32 | 4005 | 13′ 1-1/2″ | T38 | R32 | |
| HEX 32 | 4305 | 14′ 1-1/2″ | T38 | R32 | |
| HEX 32 | 4915 | 16′ 1-1/2″ | T38 | R32 | |
| HEX 32 | 5525 | 18′ 1-1/2″ | T38 | R32 | |
| HEX Drifter rod R32 - R38 - HEX 35 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ ROPE THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 35 | 3090 | 10′ 1-1/2″ | R38 | R32 | |
| HEX 35 | 3700 | 12′ 1-1/2″ | R38 | R32 | |
| HEX 35 | 4005 | 13′ 1-1/2″ | R38 | R32 | |
| HEX 35 | 4305 | 14′ 1-1/2″ | R38 | R32 | |
| HEX 35 | 4915 | 16′ 1-1/2″ | R38 | R32 | |
| HEX 35 | 5525 | 18′ 1-1/2″ | R38 | R32 | |
| HEX Drifter rod R32 - T38 - HEX 35 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 35 | 2475 | 8′ 1-1/2″ | T38 | R32 | |
| HEX 35 | 3090 | 10′ 1-1/2″ | T38 | R32 | |
| HEX 35 | 3700 | 12′ 1-1/2″ | T38 | R32 | |
| HEX 35 | 4305 | 14′ 1-1/2″ | T38 | R32 | |
| HEX 35 | 4460 | 14′ 7-1/2″ | T38 | R32 | |
| HEX 35 | 4915 | 16′ 1-1/2″ | T38 | R32 | |
| HEX 35 | 5525 | 18′ 1-1/2″ | T38 | R32 | |
| HEX 35 | 6140 | 20′ 1-1/2″ | T38 | R32 | |
| HEX 35 | 6400 | 21′ | T38 | R32 | |
| HEX SPEED Drifter rod R32M - R38F - HEX 35 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ FEMALE ROPE THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 35 | 3700 | 12′ 1-1/2″ | R38F | R32M | |
| HEX 35 | 4915 | 16′ 1-1/2″ | R38F | R32M | |
| HEX SPEED Drifter rod R32M - T38F - HEX 35 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ FEMALE TRAP. THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 35 | 3090 | 10′ 1-1/2″ | T38F | R32M | |
| HEX 35 | 3700 | 12′ 1-1/2″ | T38F | R32M | |
| HEX 35 | 4305 | 14′ 1-1/2″ | T38F | R32M | |
| HEX 35 | 4915 | 16′ 1-1/2″ | T38F | R32M | |
| HEX 35 | 5525 | 18′ 1-1/2″ | T38F | R32M | |
| HEX 35 | 6140 | 20′ 1-1/2″ | T38F | R32M | |
| Round Drifter rod R32 - R38 - RD 39 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/2″ ROUND (39mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| RD 39 | 1830 | 6′ | R38 | R32 | |
| RD 39 | 4305 | 14′ 1-1/2″ | R38 | R32 | |
| RD 39 | 4915 | 16′ 1-1/2″ | R38 | R32 | |
| Round Drifter rod R32 - T38 - RD 39 1-1/4″ ROPE THREAD (32mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-1/2″ ROUND (39mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| RD 39 | 4305 | 14′ 1-1/2″ | T38 | R32 | |
| RD 39 | 4915 | 16′ 1-1/2″ | T38 | R32 | |
| RD 39 | 5525 | 18′ 1-1/2″ | T38 | R32 | |
| RD 39 | 6140 | 20′ 1-1/2″ | T38 | R32 | |
| RD 39 | 6400 | 21′ | T38 | R32 | |
| Shank rod R32 1-1/4″ ROPE THREAD (32mm) X 7/8″ HEX (22mm), 4-1/4″ SHANK (108mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 22 | 255 | 10″ | SHANK (108mm) | R32 | |
| HEX 22 | 610 | 2′ | SHANK (108mm) | R32 | |
| HEX 22 | 1220 | 4′ | SHANK (108mm) | R32 | |
| HEX 22 | 1830 | 6′ | SHANK (108mm) | R32 | |
| Shank rod R32 1-1/4″ ROPE THREAD (32mm) X 1″ HEX (25mm), 4-1/4″ SHANK (108mm) | |||||
| |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 32 | 255 | 10″ | SHANK (108mm) | R32 | |
| HEX 32 | 610 | 2′ | SHANK (108mm) | R32 | |
| HEX 32 | 915 | 3′ | SHANK (108mm) | R32 | |
| HEX 32 | 1220 | 4′ | SHANK (108mm) | R32 | |
| HEX 32 | 1525 | 5′ | SHANK (108mm) | R32 | |
| HEX 32 | 1830 | 6′ | SHANK (108mm) | R32 | |
| HEX 32 | 2440 | 8′ | SHANK (108mm) | R32 | |
| HEX 32 | 3050 | 10′ | SHANK (108mm) | R32 | |
| HEX 32 | 3660 | 12′ | SHANK (108mm) | R32 | |
| Button bit | Carbide dimension | Dimensions D | Flushing hole | |||||
| Gauge | Front | |||||||
| [No.] | [mm] | [No.] | [mm] | [mm] | [in] | Front | Side | |
 |
5 | 11 | 2 | 9 | 48 | 1 7/8″ | 1 | 1 |
| 5 | 12.7 | 2 | 9.5 | 51 | 2″ | 1 | 2 | |
 |
6 | 9.5 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 |
| 6 | 9 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 | |
| 6 | 10 | 3 | 9 | 48 | 1 7/8″ | 3 | 1 | |
| 6 | 10 | 3 | 9.5 | 51 | 2″ | 3 | 1 | |
| 6 | 10 | 3 | 10 | 57 | 2 1/4″ | 3 | 1 | |
 |
6 | 10 | 3 | 8 | 45 | 1 3/4″ | 3 | 1 |
| 6 | 10 | 3 | 8 | 48 | 1 7/8″ | 3 | 1 | |
| HEX Drifter rod SR35 - R38 - HEX 35 1-3/8″ ROPE THREAD (35mm) X 1-1/2″ ROPE THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 35 | 3700 | 12′ 1-1/2″ | R38 | SR35 | |
| HEX 35 | 4305 | 14′ 1-1/2″ | R38 | SR35 | |
| HEX 35 | 4915 | 16′ 1-1/2″ | R38 | SR35 | |
| HEX 35 | 5530 | 18′ 1-1/2″ | R38 | SR35 | |
| HEX Drifter rod SR35 - T38 - HEX 35 1-3/8″ ROPE THREAD (35mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 35 | 3050 | 10′ | T38 | SR35 | |
| HEX 35 | 3700 | 12′ 1-1/2″ | T38 | SR35 | |
| HEX 35 | 4305 | 14′ 1-1/2″ | T38 | SR35 | |
| HEX 35 | 4915 | 16′ 1-1/2″ | T38 | SR35 | |
| HEX 35 | 5525 | 18′ 1-1/2″ | T38 | SR35 | |
| HEX 35 | 6140 | 20′ 1-1/2″ | T38 | SR35 | |
| HEX 35 | 6400 | 21′ | T38 | SR35 | |
| HEX SPEED Drifter rod SR35M - T38F - HEX 35 1-3/8″ ROPE THREAD (35mm) X 1-1/2″ FEMALE TRAP. THREAD (38mm) X 1-3/8″ HEX (35mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| HEX 35 | 3700 | 12′ 1-1/2″ | T38F | SR35M | |
| HEX 35 | 4310 | 14′ 1-1/2″ | T38F | SR35M | |
| HEX 35 | 4915 | 16′ 1-1/2″ | T38F | SR35M | |
| HEX 35 | 5525 | 18′ 1-1/2″ | T38F | SR35M | |
| HEX 35 | 6140 | 20′ 1-1/2″ | T38F | SR35M | |
| Round Drifter rod SR35 - R38 - RD 39 1-3/8″ ROPE THREAD (35mm) X 1-1/2″ ROPE THREAD (38mm) X 1-1/2″ ROUND (39mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| RD 39 | 4305 | 14′ 1-1/2″ | R38 | SR35 | |
| RD 39 | 4915 | 16′ 1-1/2″ | R38 | SR35 | |
| RD 39 | 5525 | 18′ 1-1/2″ | R38 | SR35 | |
| Round Drifter rod SR35 - T38 - RD 39 1-3/8″ ROPE THREAD (35mm) X 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 1-1/2″ ROUND (39mm) | |||||
 |
ROD CROSS SECTION | LENGTH (L) | THREAD | ||
| mm | FT | Lifit | Right | ||
| RD 39 | 4305 | 14′ 1-1/2″ | T38 | SR35 | |
| RD 39 | 4915 | 16′ 1-1/2″ | T38 | SR35 | |
| RD 39 | 5525 | 18′ 1-1/2″ | T38 | SR35 | |
| RD 39 | 6140 | 20′ 1-1/2″ | T38 | SR35 | |
| RD 39 | 6400 | 21′ | T38 | SR35 | |
