Pangeboran bangku

Bangku pangeboran Diulas Gambar
  • Pangeboran bangku
  • Pangeboran bangku
  • Pangeboran bangku

Katerangan pondok:

Bangku sareng alat pangeboran produksi kalebet rod, adaptor shank, gandeng sareng bit.Urang boga utamana 9 threads: R3212, R32, HL38, T38, T45, T51, T60, ST58 na ST68.Éta bisa dipaké kalawan bit tombol, cross bit jeung produk reaming.rentang komprehensif Sanshan pangeboran ngeunaan bangku jeung produksi parabot pangeboran batu ngawengku sagalana ti 1 "tali parabot thread sagala jalan nepi ka T60 parabot thread, Loba nasabah nyebutkeun yén rod bor, tabung jeung bit tombol anu pangalusna dina mar ...


Unduh salaku PDF

Rincian produk

R32

T35

R38

T38

T45

T51

ST58

GT60

ST68

Tag produk

Bangku sareng alat pangeboran produksi kalebet rod, adaptor shank, gandeng sareng bit.Kami ngagaduhan 9 utas:R3212, R32,HL38, T38, T45, T51, T60,ST58jeungST68.Éta bisa dipaké kalawanbit tombol, cross bit jeung produk reaming.

rentang komprehensif Sanshan pangeboran ngeunaan bangku jeung produksi parabot pangeboran batu ngawengku sagalana ti 1 "tali parabot thread sagala jalan nepi ka T60 parabot thread, Loba nasabah nyebutkeun yén bor rod, tabung jeungbit tombols anu pangalusna dina pasaran kiwari.Hayu urang nyebutkeun aranjeunna bakal ngaronjatkeun produktivitas considerably.

Bangku pangeboran-R32
 r32
Bangku pangeboran-T35
 t35
Bangku pangeboran-R38
 r38
Bangku pangeboran-T38
 t38
Pangeboran bangku-T45
 t45
Pangeboran bangku-T51
 t51
Pangeboran bangku-ST58
 st58
Bangku pangeboran-GT60
gt60

R25 (1"),R28 (1 1/8"),R32 (1 1/4"),R/T38 (1 1/2"),T45 (1 3/4"),T51 (2"), T60 (2 3/8")
Bor bit R / T38, Extension rod T38 - Hex.32 mm - T38, Extension rod T38 - Babak 38 mm - T38 (Speedrod), Extension rod R38 - Babak 38 mm - R38,
Extension rod T38 - Babak 38 mm - T38, Extension rod T38 - Babak 38 mm - T38 (kalayan benang ganda) Guide rod T38 - Babak 45 mm - T38 (Speedrod),
Pituduh pipahT38,Gandeng R/T 38.reaming bit, pilot adpter,

Katerangan:rod extension, Ngaran séjén nyaéta Extension bor baja, Extension bor rod, sarta Extension steel, M / F rod (Speedrod),

 

  • saméméhna:
  • Teras:

    • tr32

    Tombol bit Diménsi karbida Ukuran D Liang flushing
    Gauge Hareupeun
    [Henteu.] [mm] [Henteu.] [mm] [mm] [di] Hareupeun Samping
     r32-tombol-bit-7 5 9 2 9 41 1 5/8″ 1 1
    5 9.5 2 8 43 1 11/16″ 1 1
    5 9.5 2 9 43 1 11/16″ 1 1
    5 10 2 9 45 1 3/4″ 1 1
    5 11 2 9 48 1 7/8″ 1 2
    5 11 2 10 51 2″ 1 1
     r32-tombol-bit-8 6 8 2 8 41 1 5/8″ 2 0
    6 8 2 8 41 1 5/8″ 2 1
    6 8 2 8 43 1 11/16″ 2 0
    6 9 2 9 45 1 3/4″ 2 0
    6 9.5 2 9.5 48 1 7/8″ 2 0
    6 11 2 9 51 2″ 2 0
     r32-tombol-bit-9 6 9 3 7 43 1 11/16″ 3 1
    6 9 3 8 45 1 3/4″ 3 1
    6 10 3 8 45 1 3/4″ 3 1
    6 9 3 9 48 1 7/8″ 3 1
    6 10 3 8 48 1 7/8″ 3 1
    6 11 3 9 51 2″ 3 1
    6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4" 3 1
     r32-tombol-bit-9-2 6 10 3 8 43 1 11/16″ 3 1
    6 9 3 7 43 1 11/16″ 3 1
    6 10 3 8 45 1 3/4″ 3 1
    6 10 3 8 48 1 7/8″ 3 1
    Beungeut datar / Retrac
     r32-tombol-bit-flatface-9 6 9 3 9 48 1 7/8″ 3 1
    6 10 3 9.5 51 2″ 3 1
    6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4" 3 1
    Pangeboran bangku
    Beungeut Datar
     r32-bangku-flatface 8 11 6 11 76 3″ 2 0
    8 10 4 10 64 2 1/2" 2 0
    Puseur serelek
     r32-bangku-dropcenter-10 6 10 3/1 10/9 64 2 1/2" 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
    Puseur serelek
     r32-bangku-dropcenter-11 6 14 3/1 12.7 / 9.5 89 3 1/2" 3 0
    6 14 3/1 12.7 / 9.5 89 3 1/2" 3 0
    Beungeut datar / Retrac
     r32-bangku-flatface-retrac-12 8 10 4 10 64 2 1/2" 2 0
    Beungeut datar / Retrac
     r32-bangku-flatface-retrac-14 8 11 6 11 76 3″ 2 0
    Puseur serelek / Retrac
     r32-bangku-dropcenter-retrac-11 6 10 3/1 10/9 64 2 1/2" 3 0
    6 12.7 3/1 10 / 9.5 76 3″ 3 0
    Puseur serelek / Retrac
     r32-bangku-dropcenter-retrac-14 8 11 4/2 11 / 9.5 89 3 1/2" 4 1
    8 11 4/2 11 / 9.5 89 3 1/2" 4 1

     

    R32 Palang bit Diménsi karbida Ukuran D Liang flushing
    Lebar Jangkungna
    [mm] [mm] [mm] [di] Hareupeun Samping
     r32-cross-bit 11.5 19 41 1 5/8″ 1 4
    9.5 19 43 1 11/16″ 1 4
    11.5 19 45 1 3/4″ 1 4
    9.5 19 48 1 7/8″ 1 4
    9.5 19 51 2″ 1 4
    9.5 19 57 2 1/4" 1 4

     

     

    R32 – R32 – Rd 32 1-1/4″ BENANG TALI (32mm) Carburized
     r32drillrod D PANJANG (L) BENANG
    mm FT Angkat Leres
    RD 32 610 2' R32 R32
    RD 32 915 3' R32 R32
    RD 32 1000 3′ 3″ R32 R32
    RD 32 1220 4' R32 R32
    RD 32 1525 5' R32 R32
    RD 32 1830 6' R32 R32
    RD 32 2000 6′ 7″ R32 R32
    RD 32 2435 8' R32 R32
    RD 32 3000 9′ 10″ R32 R32
    RD 32 3050 10′ R32 R32
    RD 32 3660 12′ R32 R32
    RD 32 4265 14′ R32 R32
    RD 32 4915 16′ 1-1/2″ R32 R32
    RD 32 5490 18′ R32 R32
    MF-Rod R32 – R32 – Rd 32 1-1/4″ BENANG TALI (32mm) Carburized
     r32drillrod-mf D PANJANG (L) BENANG
    mm FT Angkat Leres
    RD 32 915 3' R32F R32
    RD 32 1000 3′ 3″ R32F R32
    RD 32 1220 4' R32F R32
    RD 32 1525 5' R32F R32
    RD 32 1830 6' R32F R32
    RD 32 2435 8' R32F R32
    RD 32 2700 8′ 10″ R32F R32
    RD 32 2850 9′ 4″ R32F R32
    RD 32 3000 9′ 10″ R32F R32
    RD 32 3050 10′ R32F R32
    RD 32 3660 12′ R32F R32
    RD 32 4000 13′ 1-1/2″ R32F R32
    RD 32 4270 14′ R32F R32
    RD 32 5370 17′ 7-1/2″ R32F R32
    RD 32 6300 20′ 8″ R32F R32

    t35

    Tombol bit Diménsi karbida Ukuran D Liang flushing
    Gauge Hareupeun
    [Henteu.] [mm] [Henteu.] [mm] [mm] [di] Hareupeun Samping
     buttonbit-flatface 6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4" 3 1
    Beungeut datar / Retrac
     buttonbit-flatface-retrac 6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4" 3 1

     

    MF-Rod T35 – T35 – Rd 39 1-3/8″ BENANG TRAPEZOIDAL (35mm) Carburized
     t35mfd D PANJANG (L) BENANG
    mm FT Angkat Leres
    48 1220 4' T35 T35
    48 1830 6' T35 T35
    48 2435 8' T35 T35
    48 3050 10′ T35 T35
    48 3660 12′ T35 T35
    48 4270 14′ T35 T35

    r38

    Tombol bit Diménsi karbida Ukuran D Liang flushing
    Gauge Hareupeun
    [Henteu.] [mm] [Henteu.] [mm] [mm] [di] Hareupeun Samping
     kancing-r38-f12 8 10 4 10 64 2 1/2" 2 0
     kancing-r38-f14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 14 6 14 102 4″ 2 0
    Puseur serelek
     buttonbit-r38-d10 6 10 3/1 10/9 64 2 1/2" 3 0
    6 10 3/1 10/9 64 2 1/2" 3 0
    6 11 3/1 11 / 9.5 70 2 3/4" 3 0
    6 11 3/1 11 / 9.5 70 2 3/4" 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-r38-d11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
    6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0

     

    R38 Palang bit Diménsi karbida Ukuran D Liang flushing
    Lebar Jangkungna
    [mm] [mm] [mm] [di] Hareupeun Samping
     crossbit-r38 12 20.6 64 2 1/2" 1 4
    12.7 25 70 2 3/4" 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2" 1 4
    16 25 102 4″ 1 4

     

    R38 – R38 – Rd 39 1-1/2″ BENANG TALI (38mm) Carburized
     r38drillrods D PANJANG (L) BENANG
    mm FT Angkat Leres
    RD 39 915 3' R38 R38
    RD 39 1000 3′ 3″ R38 R38
    RD 39 1220 4' R38 R38
    RD 39 1500 4′ 11″ R38 R38
    RD 39 1830 6' R38 R38
    RD 39 2000 6′ 7″ R38 R38
    RD 39 2435 8' R38 R38
    RD 39 3050 10′ R38 R38
    RD 39 3660 12′ R38 R38
    RD 39 4000 14′ R38 R38
    MF-Rod R38 – R38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
     r38mfd D PANJANG (L) BENANG
    mm FT Angkat Leres
    56 1220 4' R38F R38
    56 1525 5' R38F R38
    56 1830 6' R38F R38
    56 2000 6′ 7″ R38F R38
    56 3050 10′ R38F R38
    56 3660 12′ R38F R38
    56 4265 14′ R38F R38

    t38

    Tombol bit Diménsi karbida Ukuran D Liang flushing
    Gauge Hareupeun
    [Henteu.] [mm] [Henteu.] [mm] [mm] [di] Hareupeun Samping
     buttonbit-t38-f9 6 10 3 10 57 2 1/4" 3 1
    6 11 3 11 64 2 1/2" 3 1
     buttonbit-t38-f9-2 6 11 3 9.5 57 2 1/4" 1 2
    6 12.7 3 11 64 2 1/2" 1 2
     buttonbit-t38-f10 6 12.7 3 12.7 76 3″ 3 1
    6 14 4 14 89 3 1/2" 3 0
     buttonbit-t38-f11 6 12.7 5 11 70 2 3/4" 1 2
    6 12.7 5 11 76 3″ 1 2
     buttonbit-t38-f12 8 10 4 10 64 2 1/2" 2 0
    8 10 4 10 70 2 3/4" 2 0
     buttonbit-t38-f13 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2" 2 0
     buttonbit-t38-f17 9 11 8 10 89 3 1/2" 3 1
    9 12.7 8 12.7 102 4″ 3 1
    Puseur serelek
     buttonbit-t38-d10 6 10 3/1 10/9 64 2 1/2" 3 0
    6 11 3/1 11 / 9.5 70 2 3/4" 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-t38-d11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     buttonbit-t38-d13 8 11 4/1 10/10 76 3″ 4 0
     buttonbit-t38-d14 8 11 4/2 11 / 9.5 89 3 1/2" 4 0
     buttonbit-t38-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    Beungeut datar / Retrac
     buttonbit-t38-fr9 6 11 3 9.5 57 2 1/4" 1 2
    6 12.7 3 11 64 2 1/2" 1 2
     buttonbit-t38-fr9-2 6 12.7 3 11 64 2 1/2" 3 0
    6 12.7 3 12.7 76 3″ 3 1
    buttonbit-t38-fr10 6 14 4 14 89 3 1/2" 3 0
     buttonbit-t38-fr12 8 10 4 10 64 2 1/2" 2 0
     buttonbit-t38-fr13 8 12.7 5 10 76 3″ 4 0
     buttonbit-t38-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 14 6 14 102 4″ 2 1
    Puseur serelek / Retrac
     buttonbit-t38-dr10 6 10 3/1 10/9 64 2 1/2" 3 0
    6 11 3/1 11 / 9.5 70 2 3/4" 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-t38-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     buttonbit-t38-dr13 8 11 4/1 10/10 76 3″ 4 0
     buttonbit-t38-dr14 8 11 4/2 11 / 9.5 89 3 1/2" 4 1
     buttonbit-t38-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1

     

    T38 Palang bit Diménsi karbida Ukuran D Liang flushing
    Lebar Jangkungna
    [mm] [mm] [mm] [di] Hareupeun Samping
     crossbit-t38 12.7 20.6 64 2 1/2" 1 4
    12.7 25 70 2 3/4" 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2" 1 4
    16 25 102 4″ 1 4

     

    T38 – T38 – Rd 39 1-1/2″ BENANG TRAPEZOIDAL (38mm) Karburisasi
     t38drillrod D PANJANG (L) BENANG
    mm FT Angkat Leres
    RD 39 1000 3′ 3″ T38 T38
    RD 39 1220 4' T38 T38
    RD 39 1500 4′ 11″ T38 T38
    RD 39 1525 5' T38 T38
    RD 39 1830 6' T38 T38
    RD 39 2000 6′ 7″ T38 T38
    RD 39 2435 8' T38 T38
    RD 39 3000 9′ 10″ T38 T38
    RD 39 3050 10′ T38 T38
    RD 39 3660 12′ T38 T38
    RD 39 4000 13′ 1-1/2″ T38 T38
    RD 39 4265 14′ T38 T38
    TANDEM THREAD T38 – T38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
     t38drillrod-tandem-therad D PANJANG (L) BENANG
    mm FT Angkat Leres
    RD 39 3050 10′ T38/T38 T38/T38
    RD 39 3660 12′ T38/T38 T38/T38
    RD 39 4265 14′ T38/T38 T38/T38
    MF-Rod T38 – T38 – Rd 39 1-1/2″ BENANG TRAPEZOIDAL (38mm) Carburized
     t38mfd D PANJANG (L) BENANG
    mm FT Angkat Leres
    56 915 3' T38F T38
    56 1000 3′ 3″ T38F T38
    56 1220 4' T38F T38
    56 1525 5' T38F T38
    56 1830 6' T38F T38
    56 2000 6′ 7″ T38F T38
    56 2435 8' T38F T38
    56 3000 9′ 10″ T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38
    56 4270 14′ T38F T38
    MF-Tube T38 – T38 – Rd 56 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 2-7/32″ BABAD (56mm) Carburized
     t38mftube D PANJANG (L) BENANG
    mm FT Angkat Leres
    56 1220 4' T38F T38
    56 1525 5' T38F T38
    56 1830 6' T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38

    t45

    Tombol bit Diménsi karbida Ukuran D Liang flushing
    Gauge Hareupeun
    [Henteu.] [mm] [Henteu.] [mm] [mm] [di] Hareupeun Samping
     buttonbit-t45-9 6 12.7 3 12.7 76 3″ 3 1
     buttonbit-t45-10 6 14 4 14 89 3 1/2" 3 0
     buttonbit-t45-13 8 12.7 5 10 76 3″ 4 0
     buttonbit-t45-14 8 14 6 12.7 102 4″ 4 2
     buttonbit-t45-14-2 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4" 2 1
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2" 2 0
     buttonbit-t45-16 8 16 8 14 127 5″ 2 0
    8 16 8 16 152 6″ 2 0
     buttonbit-t45-17 9 11 8 10 89 3 1/2" 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t45-18 9 14 9 12.7 115 4 1/2" 3 1
    9 14 9 14 127 5″ 3 1
    Puseur serelek
     buttonbit-t45-d11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     buttonbit-t45-d13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12.7 / 12.7 89 3 1/2" 4 0
     buttonbit-t45-d14 8 11 4/2 11 / 9.5 83 3 1/4" 4 1
    8 11 4/2 11 / 9.5 89 3 1/2" 4 1
     buttonbit-t45-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14/11 115 4 1/2" 4 0
    Beungeut datar / Retrac
     buttonbit-t45-fr9 6 12.7 3 12.7 76 3″ 3 1
     buttonbit-t45-fr10 6 14 4 14 89 3 1/2" 3 0
     buttonbit-t45-fr13 8 12.7 5 10 76 3″ 4 0
    8 12.7 5 12.7 89 3 1/2" 4 2
     buttonbit-t45-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4" 2 0
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2" 2 0
     buttonbit-t45-fr16 8 16 8 14 127 5″ 2 0
    Puseur serelek / Retrac
     buttonbit-t45-dr10 6 11 3/1 11 / 9.5 70 2 3/4" 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     buttonbit-t45-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     buttonbit-t45-dr13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12.7 / 12.7 89 3 1/2" 4 0
     buttonbit-t45-dr14 8 11 4/2 11 / 9.5 89 3 1/2" 4 1
     buttonbit-t45-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1
    8 14 4/3 14 / 12.7 115 4 1/2" 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 2

     

    T45 Palang bit Diménsi karbida Ukuran D Liang flushing
    Lebar Jangkungna
    [mm] [mm] [mm] [di] Hareupeun Samping
     crossbit-t45 12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2" 1 4
    16 25 102 4″ 1 4

     

    T45 – T45 – Rd 46 1-3/4″ BENANG TRAPEZOIDAL (45mm) Karburisasi
     t45drillrod D PANJANG (L) BENANG
    mm FT Angkat Leres
    RD 46 1000 3′ 3″ T45 T45
    RD 46 1220 4' T45 T45
    RD 46 1500 4′ 11″ T45 T45
    RD 46 1525 5' T45 T45
    RD 46 1830 6' T45 T45
    RD 46 2000 6′ 7″ T45 T45
    RD 46 2435 8' T45 T45
    RD 46 3000 9′ 10″ T45 T45
    RD 46 3050 10′ T45 T45
    RD 46 3660 12′ T45 T45
    RD 46 4265 14′ T45 T45
    RD 46 4875 16′ T45 T45
    RD 46 5490 18′ T45 T45
    RD 46 6095 20′ T45 T45
    TANDEM THREAD T45 – T45 – Rd 46 1-3/4″ TRAPEZOIDAL THREAD (45mm) Carburized
     t45drillrod-tandem-thread D PANJANG (L) BENANG
    mm FT Angkat Leres
    RD 39 3050 10′ T45/T45 T45/T45
    RD 39 3660 12′ T45/T45 T45/T45
    RD 39 4265 14′ T45/T45 T45/T45
    MF-Rod T45 – T45 – Rd 46 1-3/4″ BENANG TRAPEZOIDAL (45mm) Carburized
     t45mfd D PANJANG (L) BENANG
    mm FT Angkat Leres
    64 1000 3′ 3″ T45F T45
    64 1220 4' T45F T45
    64 1500 4′ 11″ T45F T45
    64 1525 5' T45F T45
    64 1830 6' T45F T45
    64 2000 6′ 7″ T45F T45
    64 2435 8' T45F T45
    64 3000 9′ 10″ T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    64 4880 16′ T45F T45
    64 5490 18′ T45F T45
    64 6100 20′ T45F T45
    MF-Tube T45 – T45 – Rd 64 1-3/4″ BENANG TRAPEZOIDAL (45mm) X 2-1/2″ BABAK (64mm) Karburisasi
     t45mftube D PANJANG (L) BENANG
    mm FT Angkat Leres
    64 1220 4' T45F T45
    64 1525 5' T45F T45
    64 1830 6' T45F T45
    64 2440 8' T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    MF-Tube T45 – T45 – Rd 76 1-3/4″ TRAPEZOIDAL THREAD (45mm) X 2-1/2″ BABAD (64mm) Carburized
     t45mftube D PANJANG (L) BENANG
    mm FT Angkat Leres
    76 1220 4' T45F T45
    76 1525 5' T45F T45
    76 1830 6' T45F T45
    76 2440 8' T45F T45
    76 3050 10′ T45F T45
    76 3660 12′ T45F T45

    t51

    Tombol bit Diménsi karbida Ukuran D Liang flushing
    Gauge Hareupeun
    [Henteu.] [mm] [Henteu.] [mm] [mm] [di] Hareupeun Samping
     buttonbit-t51-f10 6 14 4 14 89 3 1/2" 3 0
     buttonbit-t51-f14 8 12.7 6 11 82 3 1/4" 2 1
    8 12.7 6 11 82 3 1/4" 2 1
    8 12.7 6 11 85 3 3/8″ 2 1
    8 12.7 6 11 85 3 3/8″ 2 1
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 12.7 6 12.7 89 3 1/2" 2 2
    8 14 6 14 102 4″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2" 2 0
    8 16 6 14 115 4 1/2" 2 0
     buttonbit-t51-f16 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2" 2 0
     buttonbit-t51-f13 8 12.7 5 12.7 89 3 1/2" 4 2
     buttonbit-t51-f14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-t51-f15 8 14 7 14 115 4 1/2" 4 2
    8 16 7 14 121 4 3/4" 4 2
     buttonbit-t51-f16 8 16 8 14 127 5″ 4 2
     buttonbit-t51-f16-2 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2" 2 0
     buttonbit-t51-f17 9 11 8 10 89 3 1/2" 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t51-fr18 9 14 9 12.7 115 4 1/2" 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-t51-f19 10 14 9 12.7 115 4 1/2" 5 0
    10 16 7 16 127 5″ 5 0
    10 16 8 16 140 5 1/2" 5 0
    Puseur serelek
     buttonbit-t51-d11 6 12.7 3/2 11 / 9.5 80 3 1/8" 3 0
    6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     buttonbit-t51-d13 8 12.7 4/1 12.7 / 12.7 89 3 1/2" 4 0
     buttonbit-t51-d14 8 11 4/2 11 / 9.5 89 3 1/2" 4 0
     buttonbit-t51-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2" 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 0
     buttonbit-t51-d16 8 16 4/4 16 / 14 140 5 1/2" 4 0
     buttonbit-t51-d18 10 14 5/3 12.7 / 12.7 115 4 1/2" 5 0
    10 16 5/3 16 / 12.7 127 5″ 5 0
    10 16 5/3 16 / 14 140 5 1/2" 5 0
    Beungeut datar / Retrac
     buttonbit-t51-fr10 6 14 4 14 89 3 1/2" 3 0
     buttonbit-t51-fr14 8 12.7 6 11 82 3 1/4" 2 1
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4" 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2" 2 0
     buttonbit-t51-fr16 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2" 2 0
     buttonbit-t51-fr17 9 11 8 10 89 3 1/2" 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t51-fr18 9 14 9 12.7 115 4 1/2" 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-t51-fr13 8 12.7 5 12.7 89 3 1/2" 4 2
     buttonbit-t51-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-t51-fr15 8 14 7 14 115 4 1/2" 4 2
     buttonbit-t51-fr16 8 16 8 14 127 5″ 4 2
    8 14 8 14 127 5″ 4 2
    Puseur serelek / Retrac
     buttonbit-t51-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     buttonbit-t51-dr13 8 12.7 4/1 12.7 / 12.7 89 3 1/2" 4 0
     buttonbit-t51-dr14 8 11 4/2 11 / 9.5 89 3 1/2" 4 1
    8 12.7 4/2 11 / 9.5 89 3 1/2" 4 1
    8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
     buttonbit-t51-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1
    8 14 4/3 14 / 12.7 115 4 1/2" 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 0
     buttonbit-t51-dr16 8 16 4/4 16 / 14 140 5 1/2" 4 0

    st58

    Tombol bit Diménsi karbida Ukuran D Liang flushing
    Gauge Hareupeun
    [Henteu.] [mm] [Henteu.] [mm] [mm] [di] Hareupeun Samping
    Beungeut datar / Retrac
     buttonbit-st58-fr17 9 11 8 10 89 3 1/2" 3 1
    9 12.7 8 11 93 3 11/16″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
    Puseur serelek / Retrac
     buttonbit-st58-dr14 8 11 4/2 11 / 9.5 89 3 1/2" 4 1
    8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
     buttonbit-st58-dr15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2" 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 0

     

    MF-Rod ST58 – ST58 – Rd 60 2-1/4″ BENANG TRAPEZOIDAL (58mm) Carburized
     st58mfd D PANJANG (L) BENANG
    mm FT Angkat Leres
    81 3660 12′ ST58F ST58
    81 4270 14′ ST58F ST58
    81 5490 18′ ST58F ST58
    81 6100 20′ ST58F ST58
    MF-Tube ST58 – ST58 – Rd 76 2-1/4″ BENANG TRAPEZOIDAL (58mm) X 3″ BABAK (76mm) Karburisasi
     st58mftube D PANJANG (L) BENANG
    mm FT Angkat Leres
    76 1220 4' ST58F ST58
    76 1525 5' ST58F ST58
    76 1830 6' ST58F ST58
    76 2440 8' ST58F ST58
    76 3050 10′ ST58F ST58
    76 3660 12′ ST58F ST58
    76 4270 14′ ST58F ST58
    76 5200 17′ 3/4″ ST58F ST58

    gt60

    Tombol bit Diménsi karbida Ukuran D Liang flushing
    Gauge Hareupeun
    [Henteu.] [mm] [Henteu.] [mm] [mm] [di] Hareupeun Samping
     buttonbit-gt60-f14 8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4" 2 0
     buttonbit-gt60-f14-2 8 14 6 12.7 102 4″ 4 2
    8 16 6 12.7 102 4″ 4 2
     buttonbit-gt60-f15 8 14 7 14 115 4 1/2" 4 2
     buttonbit-gt60-f16 8 16 8 14 127 5″ 4 2
     buttonbit-gt60-f18 9 14 9 12.7 115 4 1/2" 3 1
    9 14 9 14 127 5″ 3 1
     buttonbit-gt60-fs19 10 14 9 12.7 115 4 1/2" 5 0
    10 16 7 16 127 5″ 5 0
    10 16 8 16 140 5 1/2" 5 0
    10 16 8 16 152 6″ 5 0
    Puseur serelek
     buttonbit-gt60-d14 8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
    8 12.7 4/2 12.7 / 9.5 95 3 3/4" 4 0
     buttonbit-gt60-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2" 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 1
     buttonbit-gt60-d16 8 16 4/4 16 / 14 140 5 1/2" 4 2
    8 16 6/4 16 / 14 152 6″ 4 0
     buttonbit-gt60-ds18 10 14 5/3 12.7 / 12.7 16 / 12.7 115 4 1/2" 5 0
    10 16 5/3 127 5″ 5 0
    10 16 5/4 16 / 14 140 5 1/2" 5 0
    Beungeut datar / Retrac
     buttonbit-gt60-fr14 8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4" 2 0
     buttonbit-gt60-fr18 9 12.7 9 11 93 3 11/16″ 1 0
     buttonbit-gt60-fr18-2 9 12.7 9 12.7 93 3 11/16″ 2 0
     buttonbit-gt60-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-gt60-fr15 8 14 7 14 115 4 1/2" 4 2
     buttonbit-gt60-fr16 8 16 8 14 127 5″ 4 2
     buttonbit-gt60-fr17 9 12.7 8 11 93 3 11/16″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-gt60-fr18-2 9 14 9 12.7 102 4″ 3 1
    9 14 9 12.7 115 4 1/2" 3 1
    9 14 9 14 127 5″ 3 1
    9 16 9 16 127 5″ 3 1
    Puseur serelek / Retrac
     buttonbit-gt60-dr14 8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
    8 12.7 4/2 12.7 / 9.5 95 3 3/4" 4 0
     buttonbit-gt60-dr15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2" 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 0
      buttonbit-gt60-drs18 10 14 5/3 12.7 / 12.7 115 4 1/2" 5 0
    10 16 5/3 16 / 12.7 127 5″ 5 0
    10 16 5/4 16 / 14 140 5 1/2" 5 0

     

    MF-Rod GT60 – GT60 – Rd 64 2-1/4″ TRAPEZOIDAL THREAD (60mm) 3-3/8″ WANITA OD (85MM) Carburized
     gt60mfrod D PANJANG (L) BENANG
    mm FT Angkat Leres
    85 3660 12′ GT60F GT60
    85 4270 14′ GT60F GT60
    85 6100 20′ GT60F GT60
    MF-Tube GT60 – GT60 – Rd 76 2-1/4″ TRAPEZOIDAL THREAD (60mm) X 3″ BABAD (76mm) Carburized
     gt60mftube D PANJANG (L) BENANG
    mm FT Angkat Leres
    76 1220 4' GT60F GT60
    76 1525 5' GT60F GT60
    76 1830 6' GT60F GT60
    76 2440 8' GT60F GT60
    76 3050 10′ GT60F GT60
    76 3660 12′ GT60F GT60
    76 4270 14′ GT60F GT60
    76 5200 17′ 3/4″ GT60F GT60
    Tombol bit Diménsi karbida Ukuran D Liang flushing
    Gauge Hareupeun
    [Henteu.] [mm] [Henteu.] [mm] [mm] [di] Hareupeun Samping
     ST68-1 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2" 4 0
    Pituduh Retrac
     ST68-2 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2" 4 0
    8 12 10 12 102 4″ 4 0
    Tugas beurat
     ST68-3 6 12 8 14 89 3 1/2" 2 0
    Collaring bit
     ST68-4 8 16 9 16 152 6″ 3 0
    Retrac bit, Tugas beurat
     ST68-5 5 14 8 16 102 4″ 2 0
    Reaming bit
     ST68-6 4 16 8 16 152 4 1/2" 4
    9 16 9 16 204 5″ 3 0
    9 16 9 18 254 4 1/2" 3 0

     

     ST68 D PANJANG (L) BENANG
    mm FT Angkat Leres
    87 1525 5' ST68F ST68
    87 1830 6' ST68F ST68

    Produk patali

    Adaptor Shank

    Adaptor Shank

    Batang bor

    Batang bor

    Bit tombol thread

    Bit tombol thread

    Chat Online WhatsApp!