Tapered tsvimbo
Taperdrill rodinoshandiswa kuchera matombo, makomba ekuputitsa uye mamwe mabasa ekuchera mumakori, migodhi yemarasha, traffic uye mamwe macontraction.Inoshanda ne taper drill bits uye ine hurefu hwakasiyana kune akasiyana maapplication, yedu taperdrill rods inouya nenzira dzakasiyana-siyana dzetaper angles, kazhinji, iyo light duty rock drill inowanzoshandisa 7 taper kana diki taper angle, inorema basa rokwe drill rinonyanya kushandisa 11, 12 taper angle.Uye dzidziso huru ndeyokuti taper drill rods uye taper drill bits zvinofanirwa kunge zviri mune imwechete tapered degree.Tinopatapered tsvimbos mune yakazara yakazara shank magadzirirwo uye simbi hex madhayamita kune inobatwa nemaoko pneumatic drilling zvinodiwa.
(1)Simbi giredhi: 95CrMo yakaenzana ne SANDBAR 20 kana C253,Z708,sanbar 23, 55SiMnMo
(2) Shank size: hex.22mm×108mm, hex.22mm×159mm, hex.22mm×80mm, hex.25mm×108mm.hex.25mm×159mm
(3)Taper:4°46′,6,7,11,12 degree etc
(4)Kureba: 0.4m-10m
(5) Package: mubhokisi remapuranga kana mumasumbu.
(6) Kubudirira: 50000MT / mwedzi
| Forged collar tapered rods | |||
| Shank hex.22 mm (7/8″) x 108 mm (4 1/4″).Rod hex.22 mm (7/8).Flushing gomba dhayamita 6.7 mm | |||
| | |||
| ROD CROSS | Urefu | Weight approx. | |
| mm | tsoka/inch | kg | |
| 4º46′ taper angle | |||
| 22H | 800 | 2'7½" | 2.8 |
| 22H | 1600 | 5'3″ | 5.3 |
| 22H | 2 000 | 6'6¾” | 6.5 |
| 22H | 2 400 | 7'10½” | 7.7 |
| 22H | 3 200 | 10'6″ | 10.2 |
| 22H | 3 500 | 11'5¾” | 11.1 |
| 22H | 4 000 | 13'1½” | 12.7 |
| 7º taper angle | |||
| 22H | 400 | 1'3¾” | 1.6 |
| 22H | 800 | 2'7½" | 2.8 |
| 22H | 1600 | 5'3″ | 5.2 |
| 22H | 1830 | 6′ | 6.0 |
| 22H | 2 000 | 6'6¾” | 6.5 |
| 22H | 2 435 | 8′ | 7.8 |
| 22H | 3 050 | 10′ | 9.7 |
| 22H | 3 200 | 10'6″ | 10.1 |
| 22H | 3 600 | 12′ | 11.4 |
| 22H | 4 000 | 13'1½” | 12.6 |
| 22H | 4800 | 15'9″ | 15.1 |
| 22H | 5 600 | 18'4½” | 17.5 |
| 22H | 6 400 | 21′ | 20.0 |
| 22H | 7200 | 23'7½” | 22.4 |
| 22H | 8 000 | 26'3″ | 24.9 |
| 11º taper angle | |||
| 22H | 800 | 2'7½" | 2.8 |
| 22H | 1 220 | 4′ | 4.1 |
| 22H | 1 525 | 5′ | 5.0 |
| 22H | 1600 | 5'3″ | 5.3 |
| 22H | 1830 | 6′ | 6.0 |
| 22H | 2 000 | 6'6¾” | 6.5 |
| 22H | 2 435 | 8′ | 7.8 |
| 22H | 3 200 | 10'6″ | 10.2 |
| 22H | 3 655 | 11'11⅞” | 11.6 |
| 22H | 4 000 | 13'1½” | 12.6 |
| 22H | 4800 | 15'9″ | 15.1 |
| 22H | 5 600 | 18'4½” | 17.6 |
| 22H | 6 400 | 21′ | 20.0 |
| 22H | 7200 | 23'7½” | 22.5 |
| 22H | 8 000 | 26'3″ | 24.9 |
| 12º taper angle | |||
| 22H | 610 | 2′ | 2.2 |
| 22H | 800 | 2'7½” | 2.8 |
| 22H | 1 220 | 4′ | 4.1 |
| 22H | 1 525 | 5′ | 5.0 |
| 22H | 1830 | 6′ | 6.0 |
| 22H | 2 000 | 6'6¾” | 6.5 |
| 22H | 2 435 | 8′ | 7.8 |
| 22H | 3 050 | 10′ | 9.7 |
| 22H | 3 200 | 10'6″ | 10.2 |
| 22H | 3 655 | 11'11⅞” | 11.6 |
| 22H | 3 965 | 13′ | 12.5 |
| 22H | 4800 | 15'9″ | 15.1 |
| 22H | 5 600 | 18'4½” | 17.5 |
| 22H | 6 400 | 21′ | 20.0 |
| 22H | 7200 | 23'7½” | 22.4 |
| 22H | 8 000 | 26′ 3″ | 24.9 |
Tapered midziyo-Drill tsvimbo -H22 mm
| Rubber collar tsvimbo | |||
| Shank hex.22 mm (7/8″) x 159 mm (6 1/4″).Rod hex.22 mm (7/8).Gomba rekutsvaira dhayamita 6 mm | |||
 | |||
| ROD CROSS | Urefu | Kurema approx. | |
| mm | tsoka/inch | kg | |
| 11° taper angle | |||
| 22H | 600 | 1'11⅝” | 2.5 |
| 22H | 900 | 2'11⅜” | 3.3 |
| 22H | 1 000 | 3'3⅜” | 3.7 |
| 22H | 1200 | 3'11¼” | 4.3 |
| 22H | 1300 | 4'3⅛” | 4.6 |
| 22H | 1400 | 4'7⅛” | 4.9 |
| 22H | 1500 | 4'11″ | 5.2 |
| 22H | 1600 | 5'3″ | 5.5 |
| 22H | 1800 | 5'10⅞” | 5.7 |
| 22H | 2 000 | 6'6¾” | 6.7 |
| 22H | 2 200 | 7'2⅝” | 7.4 |
| 22H | 2 400 | 7'10½” | 7.7 |
| 22H | 2 600 | 8'6⅜” | 8.6 |
| 22H | 2800 | 9'2¼” | 9.2 |
| 22H | 3 000 | 9'10⅛” | 10.0 |
| 22H | 3 200 | 10'6″ | 10.5 |
| 22H | 3 400 | 10'9⅞” | 10.8 |
| 22H | 3 600 | 11'9¾” | 11.5 |
| 22H | 3 800 | 12'5⅝” | 12.3 |
| 22H | 4 200 | 13'9⅜” | 13.6 |
| 22H | 4 500 | 14'9⅛” | 14.5 |
Tapered midziyo-Drill tsvimbo-H25 mm
| Tapered tsvimbo | |||
| Shank hex.25 mm (1″) x 108 mm (4 1/4″).Rod hex.25 mm (1″).Flushing gomba dhayamita 8.6 mm | |||
 | |||
| ROD CROSS | Urefu | Kurema approx. | |
| mm | tsoka/inch | kg | |
| 7º taper angle | |||
| 25H | 600 | 1'11⅝” | 2.8 |
| 25H | 1 220 | 4′ | 5.3 |
| 25H | 1500 | 4'11″ | 6.4 |
| 25H | 1600 | 5'3″ | 6.8 |
| 25H | 1830 | 6′ | 7.7 |
| 25H | 2 000 | 6'6¾” | 8.3 |
| 25H | 2 200 | 7'2⅝” | 9.1 |
| 25H | 2 400 | 7'10½” | 9.9 |
| 25H | 2 600 | 8'6⅜” | 10.7 |
| 25H | 3 200 | 10'6″ | 13.0 |
| 25H | 3900 | 12'9½" | 15.8 |
Tapered midziyo-Drill tsvimbo-H25 mm
| Forged collar rods | |||
| Shank hex.25 mm (1″) x 159 mm (6 1/4″).Rod hex.25 mm (1″).Flushing gomba dhayamita 8.6 mm | |||
 | |||
| ROD CROSS | Urefu | Kurema approx. | |
| mm | tsoka/inch | kg | |
| 12 ° taper angle | |||
| 25H | 500 | 1'7⅝” | 2.7 |
| 25H | 700 | 2'3½" | 3.5 |
| 25H | 1 000 | 3'3⅜” | 4.7 |
| 25H | 1400 | 4'7⅛” | 62 |
| 25H | 1600 | 5'3″ | 6.8 |
| 25H | 2 000 | 6'6¾” | 8.5 |
| 25H | 2 500 | 8'2⅜” | 10.4 |
| 25H | 2 600 | 8'6⅜” | 10.9 |
| 25H | 3 200 | 10'6″ | 13.2 |
| 25H | 3 300 | 10'9⅞” | 13.6 |
| 25H | 3 550 | 11'5¾” | 14.6 |
| 25H | 3 800 | 12'5⅝” | 15.6 |
| 25H | 4 600 | 11′ | 18.7 |
