Self-fandavahana vatofantsika rafitra
Anchoring no be mpampiasa ao amin'ny tonelina ho an'ny fanohanana mialoha, hantsana, morontsiraka, ahy, ny rano conservancy tetikasa, fanorenana fototra, roadbed fanamafisana sy ara-jeolojika fitsaboana diso toy ny landslip, triatra, ary milentika taona, dia tsy azo soloina amin'ny fanorenana tery tontolo iainana.
tombony
Self Drilling Hollow Bar Vatofantsika System:
Ahitana barany misy kofehy poakaty mipetaka amin'ny fandavahana izay manao fandavahana.Ny bara hollow dia ahafahan'ny rivotra sy ny rano mandeha malalaka amin'ny bar mandritra ny fandavahana mba hanesorana ny potipoti-javatra, rehefa vita ny fandavahana amin'ny halalin'ny ilaina, ny grout dia mameno ny bara hollow amin'ny alàlan'ny fanerena ho an'ny fitakiana azy ary mandrakotra tanteraka ny bolt manontolo.
Coupler: Ny coupler dia azo ampiasaina hanatevin-daharana ny barany poakaty sy hanitarana ny halavan'ny bolt, midika izany fa ny vatofantsika dia azo avela miaraka amin'ny couplers.
Plate sy voanjo: Ny takelaka sy ny voa dia napetraka araka ny fepetra takian'izy ireo.
Drill bit: Ny fandavahana dia hofantenana amin'ny safidy ny toe-tany.
Vatofantsika fandavahana tena R25
Hollow Anchor Bar | |||||
| Size | Dia ivelany. | Dia anatiny. | Load farany | Enta-mavesatra | lanja |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| R25-12 | 25 | 12 | 200 | 150 | 2.35 |
Drill Bit | ||||
| Type | Dia ivelany. | lanja | Laharana fampiharana (toro-hevitra) | |
| (mm) | (inch) | (Kg) | ||
| Asio lakroa kely | 42 | 1.65 | 0.35 | Asio lakroa ho an'ny fasika sy fasika |
| 51 | 2 | 0.38 | ||
| Biby hazo fijaliana vy | 42 | 1.65 | 0.3 | Biby hazo fijaliana mafy ho an'ny toe-javatra midadasika midadasika miaraka amin'ny vatokely. |
| 51 | 2 | 0.4 | ||
| TC cross bit | 42 | 1.65 | 0.35 | TC cross bit ho an'ny fiforonan'ny rock malefaka sy antonony |
| 51 | 2 | 0.45 | ||
Coupler | ||||
| Size | Dia ivelany. | NY FAHARETANY | lanja | Fanamarihana |
| (mm) | (mm) | (Kg/pc) | ||
| R25-S | 36 | 150 | 0.66 | Miaraka amin'ny rafitra famehezana |
| R25-E | 36 | 150 | 0.66 | Tsy misy rafitra famehezana |
Hex Nut | ||||
| Size | Haben'ny lakile | NY FAHARETANY | lanja | hamafin'ny |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| R25-S | 41 | 30 | 0.2 | 25-30 |
Domed Plate | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| R25-E | 150×150 | 8 | 30 | 1.4 |
| 150×150 | 5 | 28 | 0.85 | |
| 200×200 | 8 | 32 | 3.2 | |
Vatofantsika fandavahana tena R32
Hollow Anchor Bar | |||||
| Size | Dia ivelany. | Dia anatiny. | Load farany | Enta-mavesatra | lanja |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R32/20 | 32 | 20 | 210 | 160 | 2.83 |
| S-R32/17 | 32 | 17 | 280 | 230 | 3.5 |
| S-R32/15 | 32 | 15 | 360 | 280 | 4 |
| E-R32/21 | 32 | 21 | 210 | 160 | 2.6 |
| E-R32/19 | 32 | 19 | 280 | 230 | 2.95 |
| E-R32/17 | 32 | 17 | 360 | 280 | 3.5 |
| E-R32/15 | 32 | 15 | 405 | 320 | 4 |
| C-R32/21 | 32 | 21 | 250 | 190 | 2.6 |
| C-R32/20 | 32 | 20 | 280 | 230 | 2.83 |
| C-R32/17.5 | 32 | 17.5 | 360 | 280 | 3.4 |
Drill Bit | |||
| Type | Dia ivelany. | lanja | Laharana fampiharana (toro-hevitra) |
| (mm) | (Kg) | ||
| Asio lakroa kely | 51 mm | 0.99 | Asio lakroa ho an'ny fasika sy fasika |
| Biby hazo fijaliana vy | 51 mm | 0.88 | Biby vy mafy ho an'ny tany malalaka sy antonony matevina |
| 76 mm | 2.87 | ||
| Steel 3 cutter bit | 76 mm | 2.65 | |
| TC cross bit | 51 mm | 0.99 | Ampidiro bitro TC ho an'ny endrika rock malefaka sy antonony |
| TC 3 cutter bit | 76 mm | 2.87 | |
| Steel arched bit | 51 mm | 0.99 | Bitika andohalambo mafy ho an'ny géométrie optimized ho an'ny tany tsy mivondrona miaraka amin'ny vato kely |
| TC arched bit | 51 mm | 0.99 | Bit arched TC ho an'ny géométrie optimized ho an'ny fananganana rock malefaka sy antonony |
| Bit bokotra vy | 51 mm | 1.32 | Biby bokotra mafy ho an'ny vato tsy mitambatra miaraka amin'ny vatolampy |
| TC bokotra bit | 51 mm | 1.43 | TC mampiditra bokotra kely ho an'ny fananganana vatolampy antonony |
| EX bit | 51 mm | 0.88 | Biby fanamoriana hazo fihinam-boa mafy, mety amin'ny ankamaroan'ny fampiharana ao anatin'izany ny tarika tery amin'ny vato malefaka. |
| EXX bit (alternative) | 51 mm | 1.1 | EXX no bitika fandavahana mafy indrindra azo ampiasaina, ho an'ny vato mafy, fanjaitra mafy ary tohatra vita amin'ny simenitra. |
Coupler | ||||
| Size | Dia ivelany. | NY FAHARETANY | lanja | Fanamarihana |
| (mm) | (mm) | (Kg/pc) | ||
| SSR32 | 42 | 145 | 0.79 | Miaraka amin'ny rafitra famehezana |
| 42 | 160 | 0.86 | ||
| 42 | 190 | 1 | ||
| SER32 | 42 | 145 | 0.77 | Tsy misy rafitra famehezana |
| 42 | 160 | 0.84 | ||
| 42 | 190 | 1 | ||
Hex Nut | ||||
| Size | Haben'ny lakile | NY FAHARETANY | lanja | hamafin'ny |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| SSR32 | 46 | 45 | 0.37 | 25-30 |
| 46 | 55 | 0.46 | ||
| 46 | 60 | 0.47 | ||
Domed Plate | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| R32-E | 150×150 | 8 | 35 | 1.3 |
| 150×150 | 5 | 35 | 0.85 | |
| 150×150 | 6 | 35 | 1 | |
| 150×150 | 10 | 35 | 1.7 | |
| 175×175 | 8 | 35 | 1.9 | |
| 200×200 | 8 | 35 | 2.6 | |
| 200×200 | 10 | 35 | 3.52 | |
| 200×200 | 12 | 35 | 2.94 | |
Vatofantsika takelaka | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R32 | 95×95 | 25 | 35 | 1.6 |
| 120×120 | 30 | 35 | 3.2 | |
| 150×150 | 8 | 35 | 1.3 | |
| 200×200 | 10 | 35 | 3.06 | |
Vatofantsika fandavahana tena R38
Hollow Anchor Bar | |||||
| Size | Dia ivelany. | Dia anatiny. | Load farany | Enta-mavesatra | lanja |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R38/20 | 38 | 20 | 500 | 400 | 5.5 |
| E-R38/22 | 38 | 22 | 500 | 400 | 4.95 |
| E-R38/18 | 38 | 18 | 550 | 430 | 6 |
| C-R38/22.5 | 38 | 22.5 | 500 | 400 | 4.8 |
| C-R38/21 | 38 | 21 | 500 | 400 | 5.25 |
Drill Bit | |||
| Type | Dia ivelany. | lanja | Laharana fampiharana (toro-hevitra) |
| (mm) | (Kg) | ||
| Biby hazo fijaliana vy | 76 mm | 1.2 | Biby hazo fijaliana mafy ho an'ny toe-javatra midadasika midadasika miaraka amin'ny vatokely |
| 90 mm | 1.4 | ||
| Steel arched bit | 76 mm | 1.2 | Bitika andohalambo mafy ho an'ny géométrie optimized ho an'ny tany tsy mivondrona miaraka amin'ny vato kely |
| TC arched bit | 115 mm | 2.85 | Bit arched TC ho an'ny géométrie optimized ho an'ny fananganana rock malefaka sy antonony |
| TC cross bit | 76 mm | 1.25 | TC cross bit ho an'ny fiforonan'ny rock malefaka sy antonony |
| 90 mm | 1.45 | ||
| TC 3 cutter bit | 76 mm | 0.85 | Ampidiro bitro TC ho an'ny endrika rock malefaka sy antonony |
| Bit bokotra vy | 76 mm | 1 | Biby bokotra mafy ho an'ny vato tsy mitambatra miaraka amin'ny vatolampy |
| TC bokotra bit | 76 mm | 1 | Bitin'ny bokotra TC ho an'ny fananganana rock antonony |
Coupler | ||||
| Size | Dia ivelany. | NY FAHARETANY | lanja | Fanamarihana |
| (mm) | (mm) | (Kg/pc) | ||
| S-R38 | 51 | 180 | 1.33 | Miaraka amin'ny rafitra famehezana |
| 51 | 200 | 1.5 | ||
| 51 | 220 | 1.67 | ||
| E-R38 | 51 | 180 | 1.38 | Tsy misy rafitra famehezana |
| 51 | 200 | 1.55 | ||
| 51 | 220 | 1.68 | ||
Hex Nut | ||||
| Size | Haben'ny lakile | NY FAHARETANY | lanja | hamafin'ny |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-R38 | 50 | 60 | 1.47 | 25-30 |
Domed Plate | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R38 | 150×150 | 8 | 41 | 3.6 |
| 200×200 | 12 | 41 | 1.38 | |
Vatofantsika takelaka | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R38 | 140×140 | 35 | 41 | 5 |
| 150×150 | 25 | 41 | 4.1 | |
| 200×200 | 12 | 41 | 3.67 | |
Vatofantsika fandavahana tena R51
Hollow Anchor Bar | |||||
| Size | Dia ivelany. | Dia anatiny. | Load farany | Enta-mavesatra | lanja |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R51/34 | 51 | 34 | 580 | 450 | 6.95 |
| S-R51/29 | 51 | 29 | 800 | 630 | 9 |
| E-R51/36 | 51 | 36 | 550 | 430 | 6.15 |
| E-R51/35 | 51 | 35 | 580 | 450 | 6.4 |
| E-R51/31 | 51 | 31 | 800 | 630 | 8.2 |
| C-R51/33 | 51 | 33 | 800 | 630 | 8 |
Drill Bit | |||
| Type | Dia ivelany. | lanja | Laharana fampiharana (toro-hevitra) |
| (mm) | (Kg) | ||
| Biby hazo fijaliana vy | 85 mm | 1.3 | Biby hazo fijaliana mafy ho an'ny toe-javatra midadasika midadasika miaraka amin'ny vatokely |
| TC cross bit | 115 mm | 1.8 | TC cross bit ho an'ny fiforonan'ny rock malefaka sy antonony |
| Bit bokotra vy | 100 mm | 1.85 | TC mampiditra bokotra kely ho an'ny vato tsy mitambatra miaraka amin'ny vatolampy |
| 115 mm | 2 | ||
| TC bokotra bit | 100 mm | 1.85 | Bitin'ny bokotra TC ho an'ny fananganana rock antonony |
Coupler | ||||
| Size | Dia ivelany. | NY FAHARETANY | lanja | Fanamarihana |
| (mm) | (mm) | (Kg/pc) | ||
| S-R51 | 63 | 200 | 1.85 | Miaraka amin'ny rafitra famehezana |
| 63 | 220 | 2 | ||
| E-R51 | 63 | 200 | 1.84 | Tsy misy rafitra famehezana |
| 63 | 220 | 2.13 | ||
Hex Nut | ||||
| Size | Haben'ny lakile | NY FAHARETANY | lanja | hamafin'ny |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-R51 | 75 | 70 | 1.53 | 25-30 |
| 75 | 80 | 1.84 | ||
Domed Plate | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R38 | 200×200 | 15 | 55 | 4.7 |
Vatofantsika takelaka | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R51 | 150×150 | 40 | 56 | 6.2 |
| 180×180 | 45 | 56 | 10.5 | |
| 200×200 | 30 | 60 | 8.72 | |
| 250×250 | 40 | 60 | 18.9 | |
T30 tena fandavahana vatofantsika
Hollow Anchor Bar | |||||
| Size | Dia ivelany. | Dia anatiny. | Load farany | Enta-mavesatra | lanja |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T30/16 | 30 | 16 | 220 | 180 | 2.9 |
| S-T30/14 | 30 | 14 | 260 | 220 | 3.35 |
| S-T30/11 | 30 | 11 | 320 | 260 | 3.6 |
| E-T30/14 | 30 | 14 | 320 | 260 | 3.35 |
Drill Bit | |||
| Type | Dia ivelany. | lanja | Laharana fampiharana (toro-hevitra) |
| (mm) | (Kg) | ||
| Biby hazo fijaliana mafy | 42mm | 0,30 kg | Biby hazo fijaliana mafy ho an'ny toe-tany malalaka sy antonony matevina |
| 46mm | 0,32 kg | ||
| 51 mm | 0,40 kg | ||
| 76mm | 0,56 kg | ||
| TC cross bit | 42mm | 0,30 kg | TC cross bit ho an'ny fiforonan'ny rock malefaka sy antonony |
| 46mm | 0,32 kg | ||
| 51 mm | 0,40 kg | ||
| Bokotra mafy | 42mm | 0,30 kg | Biby bokotra mafy ho an'ny vato tsy mitambatra miaraka amin'ny vatolampy |
| 46mm | 0,32 kg | ||
| 51 mm | 0,40 kg | ||
| TC bokotra bit | 46mm | 0,45 kg | Bit bokotra TC ho an'ny fananganana rock antonony |
| 51 mm | 0,69 kg | ||
Coupler | ||||
| Size | Dia ivelany. | NY FAHARETANY | lanja | Fanamarihana |
| (mm) | (mm) | (Kg/pc) | ||
| S-T30 | 38 | 105 | 0.39 | Miaraka amin'ny rafitra famehezana |
| E-T30 | 38 | 105 | 0.45 | Tsy misy rafitra famehezana |
Hex Nut | ||||
| Size | Haben'ny lakile | NY FAHARETANY | lanja | hamafin'ny |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T30 | 46 | 35 | 0.31 | 25-30 |
Voanjo vozon-tranonjaza boribory | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T30 | 46 | 35 | 0.33 | 290-340 |
Vatofantsika takelaka | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T30 | 150×150 | 25 | 40 | 4.2 |
| 200×200 | 8 | 36 | 2.43 | |
T40 tena fandavahana vatofantsika
Hollow Anchor Bar | |||||
| Size | Dia ivelany. | Dia anatiny. | Load farany | Enta-mavesatra | lanja |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T40/20 | 40 | 20 | 539 | 430 | 6.2 |
| S-T40/16 | 40 | 16 | 660 | 525 | 7.2 |
| E-T40/22 | 40 | 22 | 539 | 430 | 5.7 |
| E-T40/18 | 40 | 18 | 660 | 525 | 6.8 |
Drill Bit | |||
| Type | Dia ivelany. | lanja | Laharana fampiharana (toro-hevitra) |
| (mm) | (Kg) | ||
| Biby hazo fijaliana mafy | 76mm | 0,90 kg | Biby hazo fijaliana mafy ho an'ny toe-tany malalaka sy antonony matevina |
| 90mm | 1,5 kg | ||
| 100mm | 1,65 kg | ||
| 115mm | 2,6 kg | ||
| TC cross bit | 76mm | 1,2 kg | TC cross bit ho an'ny fiforonan'ny rock malefaka sy antonony |
| 90mm | 1,75 kg | ||
| 100mm | 2Pj | ||
| 115mm | 2,8 kg | ||
| 130mm | 3,1 kg | ||
| 150mm | 5 kg | ||
| Biby hazo fijaliana mafy | 76mm | 1,15 kg | Biby bokotra mafy ho an'ny vato tsy mitambatra miaraka amin'ny vatolampy |
| 90mm | 1,68 kg | ||
| 100mm | 2,15 kg | ||
| 115mm | 2,3 kg | ||
| 130mm | 3,15 kg | ||
| TC bokotra bit | 76mm | 1,78 kg | Bit bokotra TC ho an'ny fananganana rock antonony |
| 90mm | 1,4 kg | ||
| 100mm | 2Pj | ||
| 115mm | 2,8 kg | ||
| 130mm | 4,92 kg | ||
Coupler | ||||
| Size | Dia ivelany. | NY FAHARETANY | lanja | Fanamarihana |
| (mm) | (mm) | (Kg/pc) | ||
| S-T40 | 54 | 140 | 1.09 | Miaraka amin'ny rafitra famehezana |
| 57 | 140 | 1.37 | ||
| E-T40 | 54 | 140 | 1.11 | Tsy misy rafitra famehezana |
| 57 | 140 | 1.39 | ||
Hex Nut | ||||
| Size | Haben'ny lakile | NY FAHARETANY | lanja | hamafin'ny |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T40 | 65 | 50 | 0.92 | 25-30 |
Voanjo vozon-tranonjaza boribory | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T40 | 65 | 50 | 0.86 | 290-340 |
Vatofantsika takelaka | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T40 | 115×115 | 20 | 56 | 1.6 |
| 125×125 | 24 | 56 | 2.4 | |
| 200×200 | 12 | 56 | 3.28 | |
| 200×200 | 30 | 56 | 8.5 | |
T52 tena fandavahana vatofantsika
Hollow Anchor Bar | |||||
| Size | Dia ivelany. | Dia anatiny. | Load farany | Enta-mavesatra | lanja |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T52/24 | 52 | 24 | 929 | 730 | 10.2 |
| S-T52/26 | 52 | 26 | 929 | 730 | 9.7 |
Coupler | ||||
| Size | Dia ivelany. | NY FAHARETANY | lanja | Fanamarihana |
| (mm) | (mm) | (Kg/pc) | ||
| S-T52 | 70 | 160 | 2.31 | Miaraka amin'ny rafitra famehezana |
| E-T52 | 70 | 160 | 2.46 | Tsy misy rafitra famehezana |
Hex Nut | ||||
| Size | Haben'ny lakile | NY FAHARETANY | lanja | hamafin'ny |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T52 | 80 | 70 | 1.94 | 25-30 |
Voanjo vozon-tranonjaza boribory | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T52 | 80 | 70 | 2.3 | 290-340 |
Vatofantsika takelaka | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| SST52 | 145×145 | 27 | 65 | 3.6 |
| 200×200 | 30 | 65 | 8.59 | |
| 220×220 | 35 | 65 | 13.1 | |
T76 Vatofantsika fandavahana tena
Hollow Anchor Bar | |||||
| Size | Dia ivelany. | Dia anatiny. | Load farany | Enta-mavesatra | lanja |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| E-T76/51 | 76 | 51 | 1600 | 1200 | 16.5 |
| E-T76/45 | 76 | 45 | 1900 | 1500 | 19.7 |
Coupler | ||||
| Size | Dia ivelany. | NY FAHARETANY | lanja | Fanamarihana |
| (mm) | (mm) | (Kg/pc) | ||
| S-T76 | 95 | 200 | 4.26 | Miaraka amin'ny rafitra famehezana |
| 95 | 220 | 4.8 | ||
Hex Nut | ||||
| Size | Haben'ny lakile | NY FAHARETANY | lanja | hamafin'ny |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T76 | 100 | 75 | 2.4 | 25-30 |
| 100 | 80 | 2.67 | ||
Voanjo vozon-tranonjaza boribory | |||
| Size | Haben'ny lakile | NY FAHARETANY | lanja |
| (mm) | (mm) | (Kg/pc) | |
| E-T76 | 95 | 70 | 1.9 |
Vatofantsika takelaka | ||||
| Size | lafiny | hateviny | Hole Dia. | lanja |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T76 | 250×250 | 60 | 80 | 27 |
| 250×250 | 40 | 80 | 18 | |
