Hammer DTH High Air Pressure
Manolotra maritoa IR izahay,DHD3.5, DHD340a, DHD360, DHD380, POLISYSYQL matoatoa.Ny haben'ny lavaka tsara indrindra ho an'ny fandavahana fipoahana miaraka amin'ny DTH dia 90mm hatramin'ny 254 mm, ny lavaka fanapoahana kely kokoa dia amin'ny ankapobeny amin'ny fampiasana martoaly ambony, ary ny lavaka lehibe kokoa dia mampiasa milina rotary.Ny maritoanay toa ny COP sy QL dia fantatra amin'ny fahamendrehany sy ny faharetany.
Noho ny toekarena sy ny fahaiza-manao fandavahana mahery vaika dia lasa fitaovana fandavahana avo lenta ho an'ny indostrian'ny fandavahana sy ny fitrandrahana harena ankibon'ny tany ny matoa midina.Ny tantanana midina ambany sy ny bitika fandavahana dia natao hiarahana miasa amin'ny firaisankina tonga lafatra, manome taham-pidirana ambony, fiainana maharitra ary lafo vidy.
1. Manome angovo ambony indrindra amin'ny bitika fandavahana, haingam-pandeha haingana ary fanjifana rivotra ambany noho ny rafitra anatiny manokana an'ny hammer DTH andiany HD natao araka ny teoria fandavahana vatolampy vaovao.
2. Fahombiazana milamina sy fiainana maharitra amin'ny andian-dahatsoratra HD DTH hammer noho ny fitaovana vy firaka avo lenta sy ny teknolojia fanodinana mandroso.
3. Iva ny tahan'ny olana ary mora ny fikojakojana noho ny tsotra, azo itokisana ary mora mivory sy disassemble anatiny firafitry ny tantanana.
4. Mora miala kely avy amin'ny tantanana noho ny kofehy multihead mampifandray ny chuck sy ny cylinder ny tantanana.
5. Azo ovaina amin'ny DTH bit sy sodina fandavahana
Misy tantanana fanerena ambany sy fanerena avo lenta ao amin'ny orinasanay.
· Mety amin'ny fitaovana fandavahana avo lenta
· Fandavahana lavadrano
· Fidirana mamaky rakitsoratra
· Fandavahana dabilio
· Fikarohana ny fampiharana ny injeniera sivily
· Vidiny ambany indrindra isaky ny tongotra nohadiana
· Fitrandrahana harena an-kibon'ny tany / fitrandrahana harena ankibon'ny tany
· Famolavolana tsotra sy matanjaka
· Fikarohana ny fampiharana ny injeniera sivily
· Fandavahana fantsakana solika
· Foot Valve tsy ilaina amin'ny kely
· Fiainana lava kokoa
· Mampitombo ny fahombiazana
· Mampivelatra hery lehibe kokoa ho an'ny fahafahan'ny compressor rehetra
· Miditra 15% hatramin'ny 30% haingana kokoa
· Manome famokarana fanampiny amin'ny vidin'ny singa ambany kokoa
(1) Habe: 90mm-605mm
(2)DTH Hammer: 3”-12”
(3) Fonosana: amin'ny raharaha hazo
(4) Famokarana: 2000pcs / volana
| DHT 3.5 | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 4.4 Kg | 9 | Cylinder ivelany | 9.5 Kg |
| 2 | “O” Ring | 0,01 Kg | 10 | Stop Ring | 0,1 Kg |
| 3 | Check Valve | 0,2 Kg | 11 | O Ring of Top Sub | 0,01 Kg |
| 4 | Lohataona | 0,02 Kg | 12 | Drive Chuck | 2.1 Kg |
| 5 | Compression Buffer | 0,02 Kg | 13 | Drill Bit | |
| 6 | Fizarana an'habakabaka | 1.4 Kg | |||
| 7 | Cylinder anatiny | 1,7 Kg | |||
| 8 | Piston | 5.6 Kg | |||
| DTH3.5 masontsivana ara-teknika | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 928 mm | 25Kg | Φ82mm | API2 3/8″ REG | DHD3.5 | Φ90-Φ110mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.5Mpa | ||||
| 1.0-1.7 Mpa | 30-60 r/min | 4,5m³/min | 8,5m³/min | ||
| M30-DTH Hammers | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 4.5 Kg | 9 | Sleeve voatarika | 0,9 Kg |
| 2 | “O” Ring | 0,01 Kg | 10 | Peratra fitazonana | 0,2 kg |
| 3 | Check Valve | 0,13 Kg | 11 | “O” Ring | 0,01 Kg |
| 4 | Lohataona | 0,02 Kg | 12 | Drive Chuck | 2,5 kg |
| 5 | Valve Seza | 0,76 Kg | 13 | Drill Bit | |
| 6 | Cylinder anatiny | 1,45 Kg | |||
| 7 | Piston | 4.8 Kg | |||
| 8 | Piston Case | 7.6 Kg | |||
| M30 masontsivana ara-teknika | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 931 mmm | 23Kg | Φ82mm | API2 3/8″ REG | M30 | Φ90-Φ115mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.5Mpa | ||||
| 1.0-1.7Mpa | 30-50 r/min | 4m³/min | 6,5m³/min | ||
| DHT340-DTH tantanana | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 8.8 Kg | 9 | Cylinder ivelany | 15.9 Kg |
| 2 | “O” Ring | 0,01 Kg | 10 | Stop Ring | 0,2 Kg |
| 3 | Check Valve | 0,46 Kg | 11 | “O” Ring | 0,01 Kg |
| 4 | Lohataona | 0,04 Kg | 12 | Drive Chuck | 3.7 Kg |
| 5 | Compression Buffer | 0,2 Kg | 13 | Drill Bit | |
| 6 | Fizarana an'habakabaka | 2.1 Kg | |||
| 7 | Cylinder anatiny | 2,45 Kg | |||
| 8 | Piston | 9 Kg | |||
| DTH 340 masontsivana teknika | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1032 mm | 43Kg | Φ99mm | API2 3/8″ REG | DHD340 | Φ110-Φ135mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.5Mpa | ||||
| 1.0-2.2Mpa | 30-60 r/min | 5,53m³/min | 10m³/min | ||
| QL40-DTH Hammer | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 8.8 Kg | 9 | Piston Case | 16.5 Kg |
| 2 | “O” Ring | 0,01 Kg | 10 | Sleeve voatarika | 0,9 Kg |
| 3 | Check Valve | 0,46 Kg | 11 | Peratra fitazonana | 0,2 Kg |
| 4 | Lohataona | 0,04 Kg | 12 | “O” Ring | 0,01 Kg |
| 5 | fingotra Buffer | 0,2 Kg | 13 | Drive Chuc | 3.3 Kg |
| 6 | Ranomasina Valve | 2.1 Kg | 14 | Drill Bit | |
| 7 | Cylinder anatiny | 2,45 Kg | |||
| 8 | Piston | 8.8 Kg | |||
| Parameter ara-teknika | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1102mm | 43.7kg | Φ99mm | API2 3/8″ REG | QL40 | Φ110-Φ135mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.2Mpa | 30-60 r/min | 5,5m³/min | 10m³/min | ||
| M40-DTH Hammer | |||||
 | |||||
| Ref. | 部件 Parts | 单重 Weight | Ref. | 部件 Parts | 单重 Weight |
| 1 | 接头 Top Sub | 8.1 Kg | 9 | 衬套 Guided Sleeve | 1,84 Kg |
| 2 | O形圈 “O”Ring | 0,01 Kg | 10 | 卡环 Retainer Ring | 0.3 Kg |
| 3 | 逆止阀 Check Valve | 0.3 Kg | 11 | O形圈 “O”Ring | 0,01 Kg |
| 4 | 弹簧 Lohataona | 0,04 Kg | 12 | 卡钎套 Drive Chuck | 3.9 Kg |
| 5 | 配气座 Valve Seat | 1,5 Kg | 13 | 钻头 Drill Bit | |
| 6 | 内缸 Cylinder anatiny | 2.1 Kg | |||
| 7 | 活塞 Piston | 8.4 Kg | |||
| 8 | 外缸 Piston Case | 15 Kg | |||
| M40 masontsivana ara-teknika | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1004mmmm | 40.5Kg | Φ99mm | API2 3/8″ REG | M40 | Φ110-Φ135mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.5Mpa | ||||
| 1.0-2.2Mpa | 30-60 r/min | 5m³/min | 9m³/min | ||
| DHT350-DTH Hammer | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 14.7 Kg | 9 | Cylinde anatiny | 4.9 Kg |
| 2 | “O” Ring | 0,02 Kg | 10 | Piston | 15.5 Kg |
| 3 | Check Valve | 1 Kg | 11 | Piston Case | 30.3 Kg |
| 4 | Lohataona | 0,06 Kg | 12 | Retainer Ringk | 0.3 Kg |
| 5 | mandrindra peratra | 0,1 Kg | 13 | “O” Ring | 0,01 Kg |
| 6 | fingotra Buffer | 0,06 Kg | 14 | Drive Chuck | 7.1 Kg |
| 7 | faladiany | 0,2 Kg | 15 | Drill Bit | |
| 8 | Ranomasina Valve | 4.2 Kg | |||
| DHT 350 masontsivana teknika | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1209mm | 78.5kg | Φ125mm | API2 3/8″ REG | DHD350 | Φ135-Φ155mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.5Mpa | 30-60 r/min | 9m³/min | 15m³/min | ||
| QL50-DTH Hammer | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 14.7 Kg | 9 | Piston Case | 24.7 Kg |
| 2 | “O” Ring | 0,02 Kg | 10 | Sleeve voatarika | 1 Kg |
| 3 | Check Valve | 1 Kg | 11 | Peratra fitazonana | 0,6 Kg |
| 4 | Lohataona | 0,06 Kg | 12 | “O” Ring | 0,01 Kg |
| 5 | fingotra Buffer | 0,2 Kg | 13 | Drive Chuc | 5.6 Kg |
| 6 | Ranomasina Valve | 4.1 Kg | 14 | Drill Bit | |
| 7 | Cylinder anatiny | 4.4 Kg | |||
| 8 | Piston | 17 Kg | |||
| Ireo singa mifandraika amin'ny QL50 | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1154 mm | 73.5kg | Φ126mm | API2 3/8″ REG | QL50 | Φ135-Φ155mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.5Mpa | 30-60 r/min | 9m³/min | 15m³/min | ||
| M50-DTH Hammer | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 13.7 Kg | 9 | Sleeve voatarika | 2.6 Kg |
| 2 | “O” Ring | 0,02 Kg | 10 | Peratra fitazonana | 0,7 Kg |
| 3 | Check Valve | 0,7 Kg | 11 | “O” Ring | 0,01 Kg |
| 4 | Lohataona | 0,1 Kg | 12 | Drive Chuck | 7.1 Kg |
| 5 | Valve Seza | 2 Kg | 13 | Drill Bit | |
| 6 | Cylinder anatiny | 2.8 Kg | |||
| 7 | Piston | 15 Kg | |||
| 8 | Piston Case | 24 Kg | |||
| Parameter ara-teknika | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1122 mmmm | 70.5Kg | Φ126mm | API2 3/8″ REG | M50 | Φ136-Φ155mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.5Mpa | 30-60 r/min | 7m³/min | 13m³/min | ||
| DHT 360-DTH Hammer | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 20.3 Kg | 9 | Piston Case | 37.2 Kg |
| 2 | “O” Ring | 0,02 Kg | 10 | Sleeve voatarika | 2,5 Kg |
| 3 | Check Valve | 0,8 Kg | 11 | Peratra fitazonana | 0,6 Kg |
| 4 | Lohataona | 0,05 Kg | 12 | “O” Ring | 0,02 Kg |
| 5 | fingotra Buffer | 0.3 Kg | 13 | Drive Chuck | 6 Kg |
| 6 | Ranomasina Valve | 5 Kg | 14 | Drill Bit | |
| 7 | Cylinder anatiny | 4 Kg | |||
| 8 | Piston | 23.5 Kg | |||
| Ireo singa mifandraika amin'ny DHD360 | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1063mm | 100.5Kg | Φ142mm | API3 1/2″ REG | DHD360 | Φ150-Φ190mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.5Mpa | 30-60 r/min | 9m³/min | 20m³/min | ||
| QL60-DTH Hammer | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 23 Kg | 9 | Piston Case | 39 Kg |
| 2 | “O” Ring | 0,02 Kg | 10 | Sleeve voatarika | 1.1 Kg |
| 3 | Check Valve | 0,08 Kg | 11 | Peratra fitazonana | 0,6 Kg |
| 4 | Lohataona | 0,05 Kg | 12 | “O” Ring | 0,02 Kg |
| 5 | fingotra Buffer | 0.3 Kg | 13 | Drive Chuck | 6.3 Kg |
| 6 | Ranomasina Valve | 6.2 Kg | 14 | Drill Bit | |
| 7 | Cylinder anatiny | 5 Kg | |||
| 8 | Piston | 23.5 Kg | |||
| Ireo singa mifandraika amin'ny QL60 | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1211mm | 100.5Kg | Φ126mm | API3 1/2″ REG | QL60 | Φ158-Φ190mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.5Mpa | 30-60 r/min | 9m³/min | 20m³/min | ||
| M60-DTH Hammer | |||||
 | |||||
| Ref. | faritra | 单重 Weight | Ref. | 部件 Parts | 单重 Weight |
| 1 | Top Sub | 20 kg | 9 | Sleeve voatarika | 4,8 kg |
| 2 | “O” Ring | 0,01 Kg | 10 | “O” Ring | 0,01 Kg |
| 3 | Check Valve | 0,56 Kg | 11 | Peratra fitazonana | 0,9 kg |
| 4 | Lohataona | 0,06 Kg | 12 | “O” Ring | 0,01 Kg |
| 5 | Valve Seza | 3,5 kg | 13 | Drive Chuck | 5,8 kg |
| 6 | Cylinder anatiny | 3,9 kg | 14 | Drill Bit | |
| 7 | Piston | 21,5 kg | |||
| 8 | Piston Case | 30,5 kg | |||
| M60 masontsivana ara-teknika | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1129 mmmm | 91.5kg | Φ144mm | API3 1/2″ REG | M60 | Φ152-Φ203mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.0Mpa | 1.8Mpa | ||||
| 1.0-2.8Mpa | 30-60 r/min | 8m³/min | 17m³/min | ||
| DHT 380-DTH Hammer | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 42 Kg | 9 | Piston | 41.5 Kg |
| 2 | Mpandrindra Shim | 0,2 Kg | 10 | Piston Case | 62.5 Kg |
| 3 | “O” Ring | 0,02 Kg | 11 | Peratra fitazonana | 1.2 Kg |
| 4 | Check Valve | 1.3 Kg | 12 | “O” Ring | 0,02 Kg |
| 5 | Lohataona | 0,09 Kg | 13 | Mpandrindra Shim | 0,2 Kg |
| 6 | fingotra Buffer | 0,4 Kg | 14 | Drive Chuck | 18.2 Kg |
| 7 | Ranomasina Valve | 13 Kg | 15 | Drill Bit | |
| 8 | Cylinder anatiny | 9.1 Kg | |||
| Ireo singa mifandraika amin'ny DHD380 | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1492 mm | 190Kg | Φ180mm | API4 1/2″ REG | DHD380 | Φ195-Φ254mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.8Mpa | 2.4Mpa | ||||
| 1.5-3.3Mpa | 30-60 r/min | 26m³/min | 34m³/min | ||
| QL80-DTH Hammer | |||||
 | |||||
| Ref. | faritra | lanja | Ref. | faritra | lanja |
| 1 | Top Sub | 42 Kg | 9 | Piston | 41 Kg |
| 2 | Mpandrindra Shim | 0,2 Kg | 10 | Piston Case | 64 Kg |
| 3 | “O” Ring | 0,02 Kg | 11 | Sleeve voatarika | 2.9 Kg |
| 4 | Check Valve | 1.3 Kg | 12 | Peratra fitazonana | 1.2 Kg |
| 5 | Lohataona | 0,1 Kg | 13 | “O” Ring | 0,02 Kg |
| 6 | fingotra Buffer | 0,4 Kg | 14 | Mpandrindra Shim | 0,2 Kg |
| 7 | Ranomasina Valve | 12.7 Kg | 15 | Drive Chuck | 12 Kg |
| 8 | Cylinder anatiny | 9.1 Kg | 16 | Drill Bit | |
| Ireo singa mifandraika amin'ny QL80 | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1471 mm | 187Kg | Φ180mm | API4 1/2″ REG | QL80 | Φ195-Φ254mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.8Mpa | 2.4Mpa | ||||
| 1.5-3.3Mpa | 30-60 r/min | 26m³/min | 34m³/min | ||
| M80-DTH Hammer | |||||
 | |||||
| Ref. | 部件 Parts | 单重 Weight | Ref. | 部件 Parts | 单重 Weight |
| 1 | 接头 Top Sub | 43 Kg | 10 | 尼龙塞 Nylon Plug | 0,04 Kg |
| 2 | O形圈 “O”Ring | 0,01 Kg | 11 | 活塞 Piston | 42 Kg |
| 3 | 逆止阀 Check Valve | 0,46 Kg | 12 | 外缸 Piston Case | 43 Kg |
| 4 | 弹簧 Lohataona | 0,07 Kg | 13 | 衬套 Guided Sleeve | 9.8 Kg |
| 5 | 阀座 Valve Seat | 0,65 Kg | 14 | 挡圈 Check Ring | 0,09 Kg |
| 6 | O形圈 “O”Ring | 0,01 Kg | 15 | 卡环 Retainer Ring | 1,9 Kg |
| 7 | 插销 Bole | 0.3 Kg | 16 | O形圈 “O”Ring | 0,01 Kg |
| 8 | O形圈 “O”Ring | 0,01 Kg | 17 | 卡钎套 Drive Chuck | 17 Kg |
| 9 | 配气杆 Rigid Valve | 2 Kg | 18 | 钻头 Drill Bit | |
| Ireo singa mifandraika amin'ny M80 | |||||
| Halavany (tsy misy bit) | lanja | Savaivony ivelany | Kofehy fifandraisana | Bit Shank | Lava lava |
| 1333 mmm | 160.5Kg | Φ180mm | API4 1/2″ REG | M80 | Φ195-Φ245mm |
| Fanerena miasa | Haingam-pihodinana soso-kevitra | Fanjifana rivotra | |||
| 1.8Mpa | 2.4Mpa | ||||
| 1.5-3.3Mpa | 30-60 r/min | 26m³/min | 35m³/min | ||
