ເຈາະ Bench

Bench drilling ຮູບພາບທີ່ແນະນໍາ
  • ເຈາະ Bench
  • ເຈາະ Bench
  • ເຈາະ Bench

ລາຍ​ລະ​ອຽດ​ສັ້ນ​:

Bench ແລະເຄື່ອງເຈາະການຜະລິດປະກອບມີ rods, shank adapters, couplings ແລະ bits.ພວກເຮົາມີ 9 ກະທູ້ຕົ້ນຕໍ: R3212, R32, HL38, T38, T45, T51, T60, ST58 ແລະ ST68.ພວກເຂົາສາມາດຖືກນໍາໃຊ້ກັບບິດປຸ່ມ, ບິດຂ້າມແລະຜະລິດຕະພັນ reaming.ເຄື່ອງມືເຈາະຫີນທີ່ຫລາກຫລາຍຂອງ Sanshan ປະກອບມີທຸກຢ່າງຕັ້ງແຕ່ອຸປະກອນສາຍເຊືອກ 1" ຈົນເຖິງອຸປະກອນ thread T60, ລູກຄ້າຫຼາຍຄົນເວົ້າວ່າ rods ເຈາະ, ທໍ່ແລະປຸ່ມບິດແມ່ນດີທີ່ສຸດໃນ mar ...


ດາວໂຫຼດເປັນ PDF

ລາຍລະອຽດຜະລິດຕະພັນ

R32

T35

R38

T38

T45

T51

ST58

GT60

ST68

ປ້າຍກຳກັບສິນຄ້າ

Bench ແລະເຄື່ອງເຈາະການຜະລິດປະກອບມີ rods, shank adapters, couplings ແລະ bits.ພວກເຮົາມີ 9 ຫົວຂໍ້ຕົ້ນຕໍ:R3212, R32,HL38, T38, T45, T51, T60,ST58ແລະST68.ພວກເຂົາສາມາດຖືກນໍາໃຊ້ກັບປຸ່ມບິດ, ບິດຂ້າມແລະຜະລິດຕະພັນ reaming.

ລະດັບທີ່ສົມບູນແບບຂອງ bench ເຈາະຂອງ Sanshan ແລະການຜະລິດ rock drilling ເຄື່ອງມືປະກອບມີທຸກສິ່ງທຸກຢ່າງຈາກ 1 "ເຊືອກ threaded ອຸປະກອນຕະຫຼອດເຖິງອຸປະກອນ T60 thread, ລູກຄ້າຈໍານວນຫຼາຍເວົ້າວ່າ rods ເຈາະ, ທໍ່ແລະ.ປຸ່ມs ແມ່ນດີທີ່ສຸດໃນຕະຫຼາດໃນມື້ນີ້.ໃຫ້ພຽງແຕ່ເວົ້າວ່າພວກເຂົາຈະປັບປຸງຜົນຜະລິດຢ່າງຫຼວງຫຼາຍ.

Bench drilling-R32
 r32
Bench drilling-T35
 t35
Bench drilling-R38
 r38
Bench drilling-T38
 t38
ເຈາະ Bench -T45
 t45
ເຈາະ Bench -T51
 t51
ເຈາະ Bench -ST58
 st58
ການເຈາະ Bench-GT60
gt60

R25 (1”), R28 (1 1/8”), R32 (1 1/4”), R/T38 (1 1/2”), T45 (1 3/4”), T51 (2”), T60 (2 3/8")
ເຈາະ R/T38, ທໍ່ເສີມ T38 – Hex.32 mm – T38, Extension rod T38 – Round 38 mm – T38 (Speedrod), Extension rod R38 – ຮອບ 38 mm – R38,
ເຊືອກເສີມ T38 - ຮອບ 38 ມມ - T38, ເຊືອກເສີມ T38 - ຮອບ 38 ມມ - T38 (ມີເສັ້ນດ້າຍສອງ) ທໍ່ຄູ່ມື T38 - ຮອບ 45 ມມ - T38 (ຄວາມໄວ),
ທໍ່ຄູ່ມືT38,Coupling R/T 38.reaming ນ້ອຍ,ຜູ້​ດັດ​ແປງ​ນັກ​ບິນ​,

ລາຍລະອຽດ:rod ຂະ​ຫຍາຍ​, ຊື່​ອື່ນໆ​ແມ່ນ Extension drill steel, Extension drill rod, and Extension steel, M/F rod ( Speedrod ) ,

 

  • ທີ່ຜ່ານມາ:
  • ຕໍ່ໄປ:

    • tr32

    ປຸ່ມ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ເຄື່ອງວັດແທກ ດ້ານໜ້າ
    [ສະບັບເລກທີ] [ມມ] [ສະບັບເລກທີ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     r32-button-bit-7 5 9 2 9 41 1 5/8″ 1 1
    5 9.5 2 8 43 1 11/16″ 1 1
    5 9.5 2 9 43 1 11/16″ 1 1
    5 10 2 9 45 1 3/4″ 1 1
    5 11 2 9 48 1 7/8″ 1 2
    5 11 2 10 51 2″ 1 1
     r32-button-bit-8 6 8 2 8 41 1 5/8″ 2 0
    6 8 2 8 41 1 5/8″ 2 1
    6 8 2 8 43 1 11/16″ 2 0
    6 9 2 9 45 1 3/4″ 2 0
    6 9.5 2 9.5 48 1 7/8″ 2 0
    6 11 2 9 51 2″ 2 0
     r32-button-bit-9 6 9 3 7 43 1 11/16″ 3 1
    6 9 3 8 45 1 3/4″ 3 1
    6 10 3 8 45 1 3/4″ 3 1
    6 9 3 9 48 1 7/8″ 3 1
    6 10 3 8 48 1 7/8″ 3 1
    6 11 3 9 51 2″ 3 1
    6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
     r32-button-bit-9-2 6 10 3 8 43 1 11/16″ 3 1
    6 9 3 7 43 1 11/16″ 3 1
    6 10 3 8 45 1 3/4″ 3 1
    6 10 3 8 48 1 7/8″ 3 1
    Flat Face / Retrac
     r32-button-bit-flatface-9 6 9 3 9 48 1 7/8″ 3 1
    6 10 3 9.5 51 2″ 3 1
    6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
    ເຈາະ Bench
    ໜ້າແປ
     r32-bench-flatface 8 11 6 11 76 3″ 2 0
    8 10 4 10 64 2 1/2″ 2 0
    ວາງສູນ
     r32-bench-dropcenter-10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
    ວາງສູນ
     r32-bench-dropcenter-11 6 14 3/1 12.7 / 9.5 89 3 1/2″ 3 0
    6 14 3/1 12.7 / 9.5 89 3 1/2″ 3 0
    Flat Face / Retrac
     r32-bench-flatface-retrac-12 8 10 4 10 64 2 1/2″ 2 0
    Flat Face / Retrac
     r32-bench-flatface-retrac-14 8 11 6 11 76 3″ 2 0
    ວາງສູນ / Retrac
     r32-bench-dropcenter-retrac-11 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 12.7 3/1 10/9.5 76 3″ 3 0
    ວາງສູນ / Retrac
     r32-bench-dropcenter-retrac-14 8 11 4/2 11/9.5 89 3 1/2″ 4 1
    8 11 4/2 11/9.5 89 3 1/2″ 4 1

     

    R32 ຂ້າມບິດ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ກວ້າງ ຄວາມສູງ
    [ມມ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     r32-ຂ້າມບິດ 11.5 19 41 1 5/8″ 1 4
    9.5 19 43 1 11/16″ 1 4
    11.5 19 45 1 3/4″ 1 4
    9.5 19 48 1 7/8″ 1 4
    9.5 19 51 2″ 1 4
    9.5 19 57 2 1/4″ 1 4

     

     

    R32 – R32 – Rd 32 1-1/4″ ເຊືອກເຊືອກ (32mm) Carburized
     r32drillrod D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    RD 32 610 2′ R32 R32
    RD 32 915 3′ R32 R32
    RD 32 1000 3′ 3″ R32 R32
    RD 32 1220 4′ R32 R32
    RD 32 1525 5′ R32 R32
    RD 32 1830 6′ R32 R32
    RD 32 2000 6′ 7″ R32 R32
    RD 32 2435 8′ R32 R32
    RD 32 3000 9′ 10″ R32 R32
    RD 32 3050 10′ R32 R32
    RD 32 3660 12′ R32 R32
    RD 32 4265 14′ R32 R32
    RD 32 4915 16′ 1-1/2″ R32 R32
    RD 32 5490 18′ R32 R32
    MF-Rod R32 – R32 – Rd 32 1-1/4″ ເຊືອກເຊືອກ (32mm) Carburized
     r32drillrod-mf D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    RD 32 915 3′ R32F R32
    RD 32 1000 3′ 3″ R32F R32
    RD 32 1220 4′ R32F R32
    RD 32 1525 5′ R32F R32
    RD 32 1830 6′ R32F R32
    RD 32 2435 8′ R32F R32
    RD 32 2700 8′ 10″ R32F R32
    RD 32 2850 9′ 4″ R32F R32
    RD 32 3000 9′ 10″ R32F R32
    RD 32 3050 10′ R32F R32
    RD 32 3660 12′ R32F R32
    RD 32 4000 13′ 1-1/2″ R32F R32
    RD 32 4270 14′ R32F R32
    RD 32 5370 17′ 7-1/2″ R32F R32
    RD 32 6300 20′ 8″ R32F R32

    t35

    ປຸ່ມ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ເຄື່ອງວັດແທກ ດ້ານໜ້າ
    [ສະບັບເລກທີ] [ມມ] [ສະບັບເລກທີ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     buttonbit-flatface 6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1
    Flat Face / Retrac
     buttonbit-flatface-retrac 6 10 3 9.5 54 2 1/8″ 3 1
    6 10 3 10 57 2 1/4″ 3 1

     

    MF-Rod T35 – T35 – Rd 39 1-3/8″ TRAPEZOIDAL THREAD (35mm) Carburized
     t35mfrod D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    48 1220 4′ T35 T35
    48 1830 6′ T35 T35
    48 2435 8′ T35 T35
    48 3050 10′ T35 T35
    48 3660 12′ T35 T35
    48 4270 14′ T35 T35

    r38

    ປຸ່ມ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ເຄື່ອງວັດແທກ ດ້ານໜ້າ
    [ສະບັບເລກທີ] [ມມ] [ສະບັບເລກທີ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     ປຸ່ມ-r38-f12 8 10 4 10 64 2 1/2″ 2 0
     ປຸ່ມ-r38-f14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    ວາງສູນ
     buttonbit-r38-d10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11/9.5 70 2 3/4″ 3 0
    6 11 3/1 11/9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
     buttonbit-r38-d11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
    6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0

     

    R38 ຂ້າມບິດ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ກວ້າງ ຄວາມສູງ
    [ມມ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     crossbit-r38 12 20.6 64 2 1/2″ 1 4
    12.7 25 70 2 3/4″ 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    R38 – R38 – Rd 39 1-1/2″ ເຊືອກເຊືອກ (38mm) Carburized
     r38drillrods D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    RD 39 915 3′ R38 R38
    RD 39 1000 3′ 3″ R38 R38
    RD 39 1220 4′ R38 R38
    RD 39 1500 4′ 11″ R38 R38
    RD 39 1830 6′ R38 R38
    RD 39 2000 6′ 7″ R38 R38
    RD 39 2435 8′ R38 R38
    RD 39 3050 10′ R38 R38
    RD 39 3660 12′ R38 R38
    RD 39 4000 14′ R38 R38
    MF-Rod R38 – R38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
     r38mfrod D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    56 1220 4′ R38F R38
    56 1525 5′ R38F R38
    56 1830 6′ R38F R38
    56 2000 6′ 7″ R38F R38
    56 3050 10′ R38F R38
    56 3660 12′ R38F R38
    56 4265 14′ R38F R38

    t38

    ປຸ່ມ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ເຄື່ອງວັດແທກ ດ້ານໜ້າ
    [ສະບັບເລກທີ] [ມມ] [ສະບັບເລກທີ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     buttonbit-t38-f9 6 10 3 10 57 2 1/4″ 3 1
    6 11 3 11 64 2 1/2″ 3 1
     buttonbit-t38-f9-2 6 11 3 9.5 57 2 1/4″ 1 2
    6 12.7 3 11 64 2 1/2″ 1 2
     buttonbit-t38-f10 6 12.7 3 12.7 76 3″ 3 1
    6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t38-f11 6 12.7 5 11 70 2 3/4″ 1 2
    6 12.7 5 11 76 3″ 1 2
     buttonbit-t38-f12 8 10 4 10 64 2 1/2″ 2 0
    8 10 4 10 70 2 3/4″ 2 0
     buttonbit-t38-f13 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t38-f17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
    ວາງສູນ
     buttonbit-t38-d10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11/9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
     buttonbit-t38-d11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t38-d13 8 11 4/1 10/10 76 3″ 4 0
     buttonbit-t38-d14 8 11 4/2 11/9.5 89 3 1/2″ 4 0
     buttonbit-t38-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    Flat Face / Retrac
     buttonbit-t38-fr9 6 11 3 9.5 57 2 1/4″ 1 2
    6 12.7 3 11 64 2 1/2″ 1 2
     buttonbit-t38-fr9-2 6 12.7 3 11 64 2 1/2″ 3 0
    6 12.7 3 12.7 76 3″ 3 1
    buttonbit-t38-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t38-fr12 8 10 4 10 64 2 1/2″ 2 0
     buttonbit-t38-fr13 8 12.7 5 10 76 3″ 4 0
     buttonbit-t38-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 1
    ວາງສູນ / Retrac
     buttonbit-t38-dr10 6 10 3/1 10/9 64 2 1/2″ 3 0
    6 11 3/1 11/9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
     buttonbit-t38-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t38-dr13 8 11 4/1 10/10 76 3″ 4 0
     buttonbit-t38-dr14 8 11 4/2 11/9.5 89 3 1/2″ 4 1
     buttonbit-t38-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1

     

    T38 ຂ້າມບິດ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ກວ້າງ ຄວາມສູງ
    [ມມ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     crossbit-t38 12.7 20.6 64 2 1/2″ 1 4
    12.7 25 70 2 3/4″ 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    T38 – T38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
     t38drillrod D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    RD 39 1000 3′ 3″ T38 T38
    RD 39 1220 4′ T38 T38
    RD 39 1500 4′ 11″ T38 T38
    RD 39 1525 5′ T38 T38
    RD 39 1830 6′ T38 T38
    RD 39 2000 6′ 7″ T38 T38
    RD 39 2435 8′ T38 T38
    RD 39 3000 9′ 10″ T38 T38
    RD 39 3050 10′ T38 T38
    RD 39 3660 12′ T38 T38
    RD 39 4000 13′ 1-1/2″ T38 T38
    RD 39 4265 14′ T38 T38
    TANDEM THREAD T38 – T38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
     t38drillrod-tandem-therad D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    RD 39 3050 10′ T38/T38 T38/T38
    RD 39 3660 12′ T38/T38 T38/T38
    RD 39 4265 14′ T38/T38 T38/T38
    MF-Rod T38 – T38 – Rd 39 1-1/2″ TRAPEZOIDAL THREAD (38mm) Carburized
     t38mfrod D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    56 915 3′ T38F T38
    56 1000 3′ 3″ T38F T38
    56 1220 4′ T38F T38
    56 1525 5′ T38F T38
    56 1830 6′ T38F T38
    56 2000 6′ 7″ T38F T38
    56 2435 8′ T38F T38
    56 3000 9′ 10″ T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38
    56 4270 14′ T38F T38
    MF-Tube T38 – T38 – Rd 56 1-1/2″ TRAPEZOIDAL THREAD (38mm) X 2-7/32″ ROUND (56mm) Carburized
     t38mftube D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    56 1220 4′ T38F T38
    56 1525 5′ T38F T38
    56 1830 6′ T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38

    t45

    ປຸ່ມ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ເຄື່ອງວັດແທກ ດ້ານໜ້າ
    [ສະບັບເລກທີ] [ມມ] [ສະບັບເລກທີ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     buttonbit-t45-9 6 12.7 3 12.7 76 3″ 3 1
     buttonbit-t45-10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t45-13 8 12.7 5 10 76 3″ 4 0
     buttonbit-t45-14 8 14 6 12.7 102 4″ 4 2
     buttonbit-t45-14-2 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t45-16 8 16 8 14 ໑໒໗ 5″ 2 0
    8 16 8 16 152 6″ 2 0
     buttonbit-t45-17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t45-18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 ໑໒໗ 5″ 3 1
    ວາງສູນ
     buttonbit-t45-d11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t45-d13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t45-d14 8 11 4/2 11/9.5 83 3 1/4″ 4 1
    8 11 4/2 11/9.5 89 3 1/2″ 4 1
     buttonbit-t45-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14/11 115 4 1/2″ 4 0
    Flat Face / Retrac
     buttonbit-t45-fr9 6 12.7 3 12.7 76 3″ 3 1
     buttonbit-t45-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t45-fr13 8 12.7 5 10 76 3″ 4 0
    8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t45-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t45-fr16 8 16 8 14 ໑໒໗ 5″ 2 0
    ວາງສູນ / Retrac
     buttonbit-t45-dr10 6 11 3/1 11/9.5 70 2 3/4″ 3 0
    6 12.7 3/1 11/9.5 76 3″ 3 0
     buttonbit-t45-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t45-dr13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t45-dr14 8 11 4/2 11/9.5 89 3 1/2″ 4 1
     buttonbit-t45-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1
    8 14 4/3 14/12.7 115 4 1/2″ 4 0
    8 16 4/3 16/12.7 ໑໒໗ 5″ 4 2

     

    T45 ຂ້າມບິດ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ກວ້າງ ຄວາມສູງ
    [ມມ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     crossbit-t45 12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2″ 1 4
    16 25 102 4″ 1 4

     

    T45 – T45 – Rd 46 1-3/4″ TRAPEZOIDAL THREAD (45mm) Carburized
     t45drillrod D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    RD 46 1000 3′ 3″ T45 T45
    RD 46 1220 4′ T45 T45
    RD 46 1500 4′ 11″ T45 T45
    RD 46 1525 5′ T45 T45
    RD 46 1830 6′ T45 T45
    RD 46 2000 6′ 7″ T45 T45
    RD 46 2435 8′ T45 T45
    RD 46 3000 9′ 10″ T45 T45
    RD 46 3050 10′ T45 T45
    RD 46 3660 12′ T45 T45
    RD 46 4265 14′ T45 T45
    RD 46 4875 16′ T45 T45
    RD 46 5490 18′ T45 T45
    RD 46 6095 20′ T45 T45
    TANDEM THREAD T45 – T45 – Rd 46 1-3/4″ TRAPEZOIDAL THREAD (45mm) Carburized
     t45drillrod-tandem-thread D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    RD 39 3050 10′ T45/T45 T45/T45
    RD 39 3660 12′ T45/T45 T45/T45
    RD 39 4265 14′ T45/T45 T45/T45
    MF-Rod T45 – T45 – Rd 46 1-3/4″ TRAPEZOIDAL THREAD (45mm) Carburized
     t45mfrod D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    64 1000 3′ 3″ T45F T45
    64 1220 4′ T45F T45
    64 1500 4′ 11″ T45F T45
    64 1525 5′ T45F T45
    64 1830 6′ T45F T45
    64 2000 6′ 7″ T45F T45
    64 2435 8′ T45F T45
    64 3000 9′ 10″ T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    64 4880 16′ T45F T45
    64 5490 18′ T45F T45
    64 6100 20′ T45F T45
    MF-Tube T45 – T45 – Rd 64 1-3/4″ TRAPEZOIDAL THREAD (45mm) X 2-1/2″ ROUND (64mm) Carburized
     t45mftube D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    64 1220 4′ T45F T45
    64 1525 5′ T45F T45
    64 1830 6′ T45F T45
    64 2440 8′ T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    MF-Tube T45 – T45 – Rd 76 1-3/4″ TRAPEZOIDAL THREAD (45mm) X 2-1/2″ ROUND (64mm) Carburized
     t45mftube D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    76 1220 4′ T45F T45
    76 1525 5′ T45F T45
    76 1830 6′ T45F T45
    76 2440 8′ T45F T45
    76 3050 10′ T45F T45
    76 3660 12′ T45F T45

    t51

    ປຸ່ມ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ເຄື່ອງວັດແທກ ດ້ານໜ້າ
    [ສະບັບເລກທີ] [ມມ] [ສະບັບເລກທີ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     buttonbit-t51-f10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t51-f14 8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 11 85 3 3/8″ 2 1
    8 12.7 6 11 85 3 3/8″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 89 3 1/2″ 2 2
    8 14 6 14 102 4″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t51-f16 8 16 8 14 ໑໒໗ 5″ 2 0
    8 16 8 16 ໑໔໐ 5 1/2″ 2 0
     buttonbit-t51-f13 8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t51-f14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-t51-f15 8 14 7 14 115 4 1/2″ 4 2
    8 16 7 14 ໑໒໑ 4 3/4″ 4 2
     buttonbit-t51-f16 8 16 8 14 ໑໒໗ 5″ 4 2
     buttonbit-t51-f16-2 8 16 8 14 ໑໒໗ 5″ 2 0
    8 16 8 16 ໑໔໐ 5 1/2″ 2 0
     buttonbit-t51-f17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t51-fr18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 ໑໒໗ 5″ 3 1
     buttonbit-t51-f19 10 14 9 12.7 115 4 1/2″ 5 0
    10 16 7 16 ໑໒໗ 5″ 5 0
    10 16 8 16 ໑໔໐ 5 1/2″ 5 0
    ວາງສູນ
     buttonbit-t51-d11 6 12.7 3/2 11/9.5 80 3 1/8″ 3 0
    6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t51-d13 8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t51-d14 8 11 4/2 11/9.5 89 3 1/2″ 4 0
     buttonbit-t51-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14/12.7 115 4 1/2″ 4 0
    8 16 4/3 16/12.7 ໑໒໗ 5″ 4 0
     buttonbit-t51-d16 8 16 4/4 ໑໖/໑໔ ໑໔໐ 5 1/2″ 4 0
     buttonbit-t51-d18 10 14 5/3 12.7 / 12.7 115 4 1/2″ 5 0
    10 16 5/3 16/12.7 ໑໒໗ 5″ 5 0
    10 16 5/3 ໑໖/໑໔ ໑໔໐ 5 1/2″ 5 0
    Flat Face / Retrac
     buttonbit-t51-fr10 6 14 4 14 89 3 1/2″ 3 0
     buttonbit-t51-fr14 8 12.7 6 11 82 3 1/4″ 2 1
    8 12.7 6 12.7 89 3 1/2″ 2 0
    8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2″ 2 0
     buttonbit-t51-fr16 8 16 8 14 ໑໒໗ 5″ 2 0
    8 16 8 16 ໑໔໐ 5 1/2″ 2 0
     buttonbit-t51-fr17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-t51-fr18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 ໑໒໗ 5″ 3 1
     buttonbit-t51-fr13 8 12.7 5 12.7 89 3 1/2″ 4 2
     buttonbit-t51-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-t51-fr15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-t51-fr16 8 16 8 14 ໑໒໗ 5″ 4 2
    8 14 8 14 ໑໒໗ 5″ 4 2
    ວາງສູນ / Retrac
     buttonbit-t51-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2″ 3 0
     buttonbit-t51-dr13 8 12.7 4/1 12.7 / 12.7 89 3 1/2″ 4 0
     buttonbit-t51-dr14 8 11 4/2 11/9.5 89 3 1/2″ 4 1
    8 12.7 4/2 11/9.5 89 3 1/2″ 4 1
    8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
     buttonbit-t51-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1
    8 14 4/3 14/12.7 115 4 1/2″ 4 0
    8 16 4/3 16/12.7 ໑໒໗ 5″ 4 0
     buttonbit-t51-dr16 8 16 4/4 ໑໖/໑໔ ໑໔໐ 5 1/2″ 4 0

    st58

    ປຸ່ມ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ເຄື່ອງວັດແທກ ດ້ານໜ້າ
    [ສະບັບເລກທີ] [ມມ] [ສະບັບເລກທີ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
    Flat Face / Retrac
     buttonbit-st58-fr17 9 11 8 10 89 3 1/2″ 3 1
    9 12.7 8 11 93 3 11/16″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
    ວາງສູນ / Retrac
     buttonbit-st58-dr14 8 11 4/2 11/9.5 89 3 1/2″ 4 1
    8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
     buttonbit-st58-dr15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14/12.7 115 4 1/2″ 4 1
    8 16 4/3 16/12.7 ໑໒໗ 5″ 4 0

     

    MF-Rod ST58 – ST58 – Rd 60 2-1/4″ TRAPEZOIDAL THREAD (58mm) Carburized
     st58mfrod D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    81 3660 12′ ST58F ST58
    81 4270 14′ ST58F ST58
    81 5490 18′ ST58F ST58
    81 6100 20′ ST58F ST58
    MF-Tube ST58 – ST58 – Rd 76 2-1/4″ TRAPEZOIDAL THREAD (58mm) X 3″ ROUND (76mm) Carburized
     st58mftube D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    76 1220 4′ ST58F ST58
    76 1525 5′ ST58F ST58
    76 1830 6′ ST58F ST58
    76 2440 8′ ST58F ST58
    76 3050 10′ ST58F ST58
    76 3660 12′ ST58F ST58
    76 4270 14′ ST58F ST58
    76 5200 17′ 3/4″ ST58F ST58

    gt60

    ປຸ່ມ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ເຄື່ອງວັດແທກ ດ້ານໜ້າ
    [ສະບັບເລກທີ] [ມມ] [ສະບັບເລກທີ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     buttonbit-gt60-f14 8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
     buttonbit-gt60-f14-2 8 14 6 12.7 102 4″ 4 2
    8 16 6 12.7 102 4″ 4 2
     buttonbit-gt60-f15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-gt60-f16 8 16 8 14 ໑໒໗ 5″ 4 2
     buttonbit-gt60-f18 9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 ໑໒໗ 5″ 3 1
     buttonbit-gt60-fs19 10 14 9 12.7 115 4 1/2″ 5 0
    10 16 7 16 ໑໒໗ 5″ 5 0
    10 16 8 16 ໑໔໐ 5 1/2″ 5 0
    10 16 8 16 152 6″ 5 0
    ວາງສູນ
     buttonbit-gt60-d14 8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
    8 12.7 4/2 12.7 / 9.5 95 3 3/4″ 4 0
     buttonbit-gt60-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14/12.7 115 4 1/2″ 4 1
    8 16 4/3 16/12.7 ໑໒໗ 5″ 4 1
     buttonbit-gt60-d16 8 16 4/4 ໑໖/໑໔ ໑໔໐ 5 1/2″ 4 2
    8 16 6/4 ໑໖/໑໔ 152 6″ 4 0
     buttonbit-gt60-ds18 10 14 5/3 12.7 / 12.7 16 / 12.7 115 4 1/2″ 5 0
    10 16 5/3 ໑໒໗ 5″ 5 0
    10 16 5/4 ໑໖/໑໔ ໑໔໐ 5 1/2″ 5 0
    Flat Face / Retrac
     buttonbit-gt60-fr14 8 12.7 6 12.7 93 3 11/16″ 2 0
    8 12.7 6 12.7 95 3 3/4″ 2 0
     buttonbit-gt60-fr18 9 12.7 9 11 93 3 11/16″ 1 0
     buttonbit-gt60-fr18-2 9 12.7 9 12.7 93 3 11/16″ 2 0
     buttonbit-gt60-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-gt60-fr15 8 14 7 14 115 4 1/2″ 4 2
     buttonbit-gt60-fr16 8 16 8 14 ໑໒໗ 5″ 4 2
     buttonbit-gt60-fr17 9 12.7 8 11 93 3 11/16″ 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-gt60-fr18-2 9 14 9 12.7 102 4″ 3 1
    9 14 9 12.7 115 4 1/2″ 3 1
    9 14 9 14 ໑໒໗ 5″ 3 1
    9 16 9 16 ໑໒໗ 5″ 3 1
    ວາງສູນ / Retrac
     buttonbit-gt60-dr14 8 12.7 4/2 12.7 / 9.5 93 3 11/16″ 4 0
    8 12.7 4/2 12.7 / 9.5 95 3 3/4″ 4 0
     buttonbit-gt60-dr15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14/12.7 115 4 1/2″ 4 1
    8 16 4/3 16/12.7 ໑໒໗ 5″ 4 0
      buttonbit-gt60-drs18 10 14 5/3 12.7 / 12.7 115 4 1/2″ 5 0
    10 16 5/3 16/12.7 ໑໒໗ 5″ 5 0
    10 16 5/4 ໑໖/໑໔ ໑໔໐ 5 1/2″ 5 0

     

    MF-Rod GT60 – GT60 – Rd 64 2-1/4″ TRAPEZOIDAL THREAD (60mm) 3-3/8″ FEMALE OD (85MM) Carburized
     gt60mfrod D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    85 3660 12′ GT60F GT60
    85 4270 14′ GT60F GT60
    85 6100 20′ GT60F GT60
    MF-Tube GT60 – GT60 – Rd 76 2-1/4″ TRAPEZOIDAL THREAD (60mm) X 3″ ROUND (76mm) Carburized
     gt60mftube D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    76 1220 4′ GT60F GT60
    76 1525 5′ GT60F GT60
    76 1830 6′ GT60F GT60
    76 2440 8′ GT60F GT60
    76 3050 10′ GT60F GT60
    76 3660 12′ GT60F GT60
    76 4270 14′ GT60F GT60
    76 5200 17′ 3/4″ GT60F GT60
    ປຸ່ມ ຂະຫນາດຄາບອນ ຂະໜາດ D ຮູຂຸມຂົນ
    ເຄື່ອງວັດແທກ ດ້ານໜ້າ
    [ສະບັບເລກທີ] [ມມ] [ສະບັບເລກທີ] [ມມ] [ມມ] [ໃນ] ດ້ານໜ້າ ຂ້າງ
     ST68-1 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2″ 4 0
    ຄູ່ມື Retrac
     ST68-2 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2″ 4 0
    8 12 10 12 102 4″ 4 0
    ໜັກໜ່ວງ
     ST68-3 6 12 8 14 89 3 1/2″ 2 0
    ບິດບ້ຽວ
     ST68-4 8 16 9 16 152 6″ 3 0
    Retrac bit, Heavy Duty
     ST68-5 5 14 8 16 102 4″ 2 0
    ບິດ
     ST68-6 4 16 8 16 152 4 1/2″ 4
    9 16 9 16 204 5″ 3 0
    9 16 9 18 254 4 1/2″ 3 0

     

     ST68 D LENGTH (L) ກະທູ້
    mm FT Lifit ສິດ
    87 1525 5′ ST68F ST68
    87 1830 6′ ST68F ST68

    ຜະ​ລິດ​ຕະ​ພັນ​ທີ່​ກ່ຽວ​ຂ້ອງ

    ອະແດບເຕີ Shank

    ອະແດບເຕີ Shank

    ໄມ້ເຈາະ

    ໄມ້ເຈາະ

    ບິດປຸ່ມກະທູ້

    ບິດປຸ່ມກະທູ້

    WhatsApp ສົນທະນາອອນໄລນ໌!