Pengeboran bangku

Bangku ngebur Featured Image
  • Pengeboran bangku
  • Pengeboran bangku
  • Pengeboran bangku

Katrangan singkat:

Bangku lan alat pengeboran produksi kalebu rod, adaptor shank, kopling lan bit.We kudu utamané 9 Utas: R3212, R32, HL38, T38, T45, T51, T60, ST58 lan ST68.Bisa digunakake karo bit tombol, bit salib lan produk reaming.Rangkuman lengkap bench pengeboran Sanshan lan alat pengeboran batu produksi kalebu kabeh saka 1 "peralatan benang tali nganti peralatan benang T60, Akeh pelanggan ujar manawa batang pengeboran, tabung lan bit tombol paling apik ing ...


Ngundhuh minangka PDF

Detail Produk

R32

T35

R38

T38

T45

T51

ST58

GT60

ST68

Tag produk

Bangku lan alat pengeboran produksi kalebu rod, adaptor shank, kopling lan bit.Kita duwe utamane 9 utas:R3212R32,HL38, T38, T45, T51, T60,ST58lanST68.Padha bisa digunakake karobit tombol, bit silang lan produk reaming.

Rangkuman lengkap pengeboran Sanshan saka bangku lan alat pengeboran batu produksi kalebu kabeh saka peralatan benang tali 1 nganti nganti peralatan benang T60, Akeh pelanggan ujar manawa batang pengeboran, tabung lanbit tombols sing paling apik ing pasar dina.Ayo padha ngomong bakal nambah produktivitas banget.

Pengeboran bangku-R32
 r32
Pengeboran bangku-T35
 t35
Pengeboran bangku-R38
 r38
Bangku pengeboran-T38
 t38
Pengeboran bangku-T45
 t45
Pengeboran bangku-T51
 t51
Pengeboran bangku-ST58
 st58
Bangku pengeboran-GT60
gt60

R25 (1"), R28 (1 1/8"), R32 (1 1/4"), R/T38 (1 1/2"), T45 (1 3/4"), T51 (2"), T60 (2 3/8")
Drill bit R/T38, Extension rod T38 – Hex.32 mm - T38, Batang ekstensi T38 - Babak 38 mm - T38 (Speedrod), Batang ekstensi R38 - Babak 38 mm - R38,
Extension rod T38 – Babak 38 mm – T38, Extension rod T38 – Round 38 mm – T38 (karo benang pindho) Guide rod T38 – Round 45 mm – T38 (Speedrod),
Pandhuan tabungT38,Kopling R/T 38.reaming bit, pilot adpter,

katrangan:rod extension, jeneng liyane yaiku Extension drill steel, Extension drill rod, lan Extension steel, M/F rod (Speedrod),

 

  • Sadurunge:
  • Sabanjure:

    • tr32

    Tombol bit Ukuran karbida Ukuran D Flushing bolongan
    Gauge Ngarep
    [Ora.] [mm] [Ora.] [mm] [mm] [ing] Ngarep Sisih
     r32-tombol-bit-7 5 9 2 9 41 1 5/8" 1 1
    5 9.5 2 8 43 1 11/16″ 1 1
    5 9.5 2 9 43 1 11/16″ 1 1
    5 10 2 9 45 1 3/4" 1 1
    5 11 2 9 48 1 7/8" 1 2
    5 11 2 10 51 2″ 1 1
     r32-tombol-bit-8 6 8 2 8 41 1 5/8" 2 0
    6 8 2 8 41 1 5/8" 2 1
    6 8 2 8 43 1 11/16″ 2 0
    6 9 2 9 45 1 3/4" 2 0
    6 9.5 2 9.5 48 1 7/8" 2 0
    6 11 2 9 51 2″ 2 0
     r32-tombol-bit-9 6 9 3 7 43 1 11/16″ 3 1
    6 9 3 8 45 1 3/4" 3 1
    6 10 3 8 45 1 3/4" 3 1
    6 9 3 9 48 1 7/8" 3 1
    6 10 3 8 48 1 7/8" 3 1
    6 11 3 9 51 2″ 3 1
    6 10 3 9.5 54 2 1/8" 3 1
    6 10 3 10 57 2 1/4" 3 1
     r32-tombol-bit-9-2 6 10 3 8 43 1 11/16″ 3 1
    6 9 3 7 43 1 11/16″ 3 1
    6 10 3 8 45 1 3/4" 3 1
    6 10 3 8 48 1 7/8" 3 1
    Pasuryan Flat / Retrac
     r32-tombol-bit-flatface-9 6 9 3 9 48 1 7/8" 3 1
    6 10 3 9.5 51 2″ 3 1
    6 10 3 9.5 54 2 1/8" 3 1
    6 10 3 10 57 2 1/4" 3 1
    Pengeboran bangku
    Wajah Datar
     r32-bench-flatface 8 11 6 11 76 3″ 2 0
    8 10 4 10 64 2 1/2" 2 0
    Pusat Drop
     r32-bangku-dropcenter-10 6 10 3/1 10/9 64 2 1/2" 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
    Pusat Drop
     r32-bangku-dropcenter-11 6 14 3/1 12.7 / 9.5 89 3 1/2" 3 0
    6 14 3/1 12.7 / 9.5 89 3 1/2" 3 0
    Pasuryan Flat / Retrac
     r32-bench-flatface-retrac-12 8 10 4 10 64 2 1/2" 2 0
    Pasuryan Flat / Retrac
     r32-bench-flatface-retrac-14 8 11 6 11 76 3″ 2 0
    Drop Center / Retrac
     r32-bench-dropcenter-retrac-11 6 10 3/1 10/9 64 2 1/2" 3 0
    6 12.7 3/1 10 / 9.5 76 3″ 3 0
    Drop Center / Retrac
     r32-bench-dropcenter-retrac-14 8 11 4/2 11 / 9.5 89 3 1/2" 4 1
    8 11 4/2 11 / 9.5 89 3 1/2" 4 1

     

    R32 Cross bit Ukuran karbida Ukuran D Flushing bolongan
    Jembar dhuwur
    [mm] [mm] [mm] [ing] Ngarep Sisih
     r32-salib-bit 11.5 19 41 1 5/8" 1 4
    9.5 19 43 1 11/16″ 1 4
    11.5 19 45 1 3/4" 1 4
    9.5 19 48 1 7/8" 1 4
    9.5 19 51 2″ 1 4
    9.5 19 57 2 1/4" 1 4

     

     

    R32 – R32 – Rd 32 1-1/4″ BENANG TALI (32mm) Karburisasi
     r32drillrod D LENGAN (L) BENANG
    mm FT Lifit bener
    RD 32 610 2' R32 R32
    RD 32 915 3' R32 R32
    RD 32 1000 3′ 3″ R32 R32
    RD 32 1220 4' R32 R32
    RD 32 1525 5' R32 R32
    RD 32 1830 6' R32 R32
    RD 32 2000 6′ 7″ R32 R32
    RD 32 2435 8' R32 R32
    RD 32 3000 9′ 10″ R32 R32
    RD 32 3050 10′ R32 R32
    RD 32 3660 12′ R32 R32
    RD 32 4265 14′ R32 R32
    RD 32 4915 16′ 1-1/2″ R32 R32
    RD 32 5490 18′ R32 R32
    MF-Rod R32 – R32 – Rd 32 1-1/4″ BENANG TALI (32mm) Karburisasi
     r32drillrod-mf D LENGAN (L) BENANG
    mm FT Lifit bener
    RD 32 915 3' R32F R32
    RD 32 1000 3′ 3″ R32F R32
    RD 32 1220 4' R32F R32
    RD 32 1525 5' R32F R32
    RD 32 1830 6' R32F R32
    RD 32 2435 8' R32F R32
    RD 32 2700 8′ 10″ R32F R32
    RD 32 2850 9' 4" R32F R32
    RD 32 3000 9′ 10″ R32F R32
    RD 32 3050 10′ R32F R32
    RD 32 3660 12′ R32F R32
    RD 32 4000 13′ 1-1/2″ R32F R32
    RD 32 4270 14′ R32F R32
    RD 32 5370 17′ 7-1/2″ R32F R32
    RD 32 6300 20′ 8″ R32F R32

    t35

    Tombol bit Ukuran karbida Ukuran D Flushing bolongan
    Gauge Ngarep
    [Ora.] [mm] [Ora.] [mm] [mm] [ing] Ngarep Sisih
     buttonbit-flatface 6 10 3 9.5 54 2 1/8" 3 1
    6 10 3 10 57 2 1/4" 3 1
    Pasuryan Flat / Retrac
     buttonbit-flatface-retrac 6 10 3 9.5 54 2 1/8" 3 1
    6 10 3 10 57 2 1/4" 3 1

     

    MF-Rod T35 – T35 – Rd 39 1-3/8″ BENANG TRAPEZOIDAL (35mm) Karburisasi
     t35mfd D LENGAN (L) BENANG
    mm FT Lifit bener
    48 1220 4' T35 T35
    48 1830 6' T35 T35
    48 2435 8' T35 T35
    48 3050 10′ T35 T35
    48 3660 12′ T35 T35
    48 4270 14′ T35 T35

    r38

    Tombol bit Ukuran karbida Ukuran D Flushing bolongan
    Gauge Ngarep
    [Ora.] [mm] [Ora.] [mm] [mm] [ing] Ngarep Sisih
     tombol-r38-f12 8 10 4 10 64 2 1/2" 2 0
     tombol-r38-f14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 14 6 14 102 4″ 2 0
    Pusat Drop
     tombolbit-r38-d10 6 10 3/1 10/9 64 2 1/2" 3 0
    6 10 3/1 10/9 64 2 1/2" 3 0
    6 11 3/1 11 / 9.5 70 2 3/4" 3 0
    6 11 3/1 11 / 9.5 70 2 3/4" 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     tombolbit-r38-d11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
    6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0

     

    R38 Cross bit Ukuran karbida Ukuran D Flushing bolongan
    Jembar dhuwur
    [mm] [mm] [mm] [ing] Ngarep Sisih
     crossbit-r38 12 20.6 64 2 1/2" 1 4
    12.7 25 70 2 3/4" 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2" 1 4
    16 25 102 4″ 1 4

     

    R38 – R38 – Rd 39 1-1/2″ BENANG TALI (38mm) Karburisasi
     r38drillrods D LENGAN (L) BENANG
    mm FT Lifit bener
    RD 39 915 3' R38 R38
    RD 39 1000 3′ 3″ R38 R38
    RD 39 1220 4' R38 R38
    RD 39 1500 4′ 11″ R38 R38
    RD 39 1830 6' R38 R38
    RD 39 2000 6′ 7″ R38 R38
    RD 39 2435 8' R38 R38
    RD 39 3050 10′ R38 R38
    RD 39 3660 12′ R38 R38
    RD 39 4000 14′ R38 R38
    MF-Rod R38 – R38 – Rd 39 1-1/2″ BENANG TRAPEZOIDAL (38mm) Karburisasi
     r38 mfro D LENGAN (L) BENANG
    mm FT Lifit bener
    56 1220 4' R38F R38
    56 1525 5' R38F R38
    56 1830 6' R38F R38
    56 2000 6′ 7″ R38F R38
    56 3050 10′ R38F R38
    56 3660 12′ R38F R38
    56 4265 14′ R38F R38

    t38

    Tombol bit Ukuran karbida Ukuran D Flushing bolongan
    Gauge Ngarep
    [Ora.] [mm] [Ora.] [mm] [mm] [ing] Ngarep Sisih
     tombolbit-t38-f9 6 10 3 10 57 2 1/4" 3 1
    6 11 3 11 64 2 1/2" 3 1
     buttonbit-t38-f9-2 6 11 3 9.5 57 2 1/4" 1 2
    6 12.7 3 11 64 2 1/2" 1 2
     tombolbit-t38-f10 6 12.7 3 12.7 76 3″ 3 1
    6 14 4 14 89 3 1/2" 3 0
     tombolbit-t38-f11 6 12.7 5 11 70 2 3/4" 1 2
    6 12.7 5 11 76 3″ 1 2
     tombolbit-t38-f12 8 10 4 10 64 2 1/2" 2 0
    8 10 4 10 70 2 3/4" 2 0
     tombolbit-t38-f13 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2" 2 0
     tombolbit-t38-f17 9 11 8 10 89 3 1/2" 3 1
    9 12.7 8 12.7 102 4″ 3 1
    Pusat Drop
     tombolbit-t38-d10 6 10 3/1 10/9 64 2 1/2" 3 0
    6 11 3/1 11 / 9.5 70 2 3/4" 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     tombolbit-t38-d11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     tombolbit-t38-d13 8 11 4/1 10/10 76 3″ 4 0
     tombolbit-t38-d14 8 11 4/2 11 / 9.5 89 3 1/2" 4 0
     tombolbit-t38-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    Pasuryan Flat / Retrac
     tombolbit-t38-fr9 6 11 3 9.5 57 2 1/4" 1 2
    6 12.7 3 11 64 2 1/2" 1 2
     buttonbit-t38-fr9-2 6 12.7 3 11 64 2 1/2" 3 0
    6 12.7 3 12.7 76 3″ 3 1
    tombolbit-t38-fr10 6 14 4 14 89 3 1/2" 3 0
     tombolbit-t38-fr12 8 10 4 10 64 2 1/2" 2 0
     tombolbit-t38-fr13 8 12.7 5 10 76 3″ 4 0
     tombolbit-t38-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 14 6 14 102 4″ 2 1
    Drop Center / Retrac
     tombolbit-t38-dr10 6 10 3/1 10/9 64 2 1/2" 3 0
    6 11 3/1 11 / 9.5 70 2 3/4" 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     tombolbit-t38-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     tombolbit-t38-dr13 8 11 4/1 10/10 76 3″ 4 0
     tombolbit-t38-dr14 8 11 4/2 11 / 9.5 89 3 1/2" 4 1
     tombolbit-t38-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1

     

    T38 Cross bit Ukuran karbida Ukuran D Flushing bolongan
    Jembar dhuwur
    [mm] [mm] [mm] [ing] Ngarep Sisih
     crossbit-t38 12.7 20.6 64 2 1/2" 1 4
    12.7 25 70 2 3/4" 1 4
    12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2" 1 4
    16 25 102 4″ 1 4

     

    T38 – T38 – Rd 39 1-1/2″ BENANG TRAPEZOIDAL (38mm) Karburisasi
     t38drillrod D LENGAN (L) BENANG
    mm FT Lifit bener
    RD 39 1000 3′ 3″ T38 T38
    RD 39 1220 4' T38 T38
    RD 39 1500 4′ 11″ T38 T38
    RD 39 1525 5' T38 T38
    RD 39 1830 6' T38 T38
    RD 39 2000 6′ 7″ T38 T38
    RD 39 2435 8' T38 T38
    RD 39 3000 9′ 10″ T38 T38
    RD 39 3050 10′ T38 T38
    RD 39 3660 12′ T38 T38
    RD 39 4000 13′ 1-1/2″ T38 T38
    RD 39 4265 14′ T38 T38
    BENANG TANDEM T38 – T38 – Rd 39 1-1/2″ BENANG TRAPEZOIDAL (38mm) Karburisasi
     t38drillrod-tandem-therad D LENGAN (L) BENANG
    mm FT Lifit bener
    RD 39 3050 10′ T38/T38 T38/T38
    RD 39 3660 12′ T38/T38 T38/T38
    RD 39 4265 14′ T38/T38 T38/T38
    MF-Rod T38 – T38 – Rd 39 1-1/2″ BENANG TRAPEZOIDAL (38mm) Karburisasi
     t38mfd D LENGAN (L) BENANG
    mm FT Lifit bener
    56 915 3' T38F T38
    56 1000 3′ 3″ T38F T38
    56 1220 4' T38F T38
    56 1525 5' T38F T38
    56 1830 6' T38F T38
    56 2000 6′ 7″ T38F T38
    56 2435 8' T38F T38
    56 3000 9′ 10″ T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38
    56 4270 14′ T38F T38
    MF-Tube T38 – T38 – Rd 56 1-1/2″ BENANG TRAPEZOIDAL (38mm) X 2-7/32″ BABAK (56mm) Karburisasi
     t38mftube D LENGAN (L) BENANG
    mm FT Lifit bener
    56 1220 4' T38F T38
    56 1525 5' T38F T38
    56 1830 6' T38F T38
    56 3050 10′ T38F T38
    56 3660 12′ T38F T38

    t45

    Tombol bit Ukuran karbida Ukuran D Flushing bolongan
    Gauge Ngarep
    [Ora.] [mm] [Ora.] [mm] [mm] [ing] Ngarep Sisih
     tombolbit-t45-9 6 12.7 3 12.7 76 3″ 3 1
     tombolbit-t45-10 6 14 4 14 89 3 1/2" 3 0
     tombolbit-t45-13 8 12.7 5 10 76 3″ 4 0
     tombolbit-t45-14 8 14 6 12.7 102 4″ 4 2
     buttonbit-t45-14-2 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4" 2 1
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2" 2 0
     tombolbit-t45-16 8 16 8 14 127 5″ 2 0
    8 16 8 16 152 6″ 2 0
     tombolbit-t45-17 9 11 8 10 89 3 1/2" 3 1
    9 12.7 8 12.7 102 4″ 3 1
     tombolbit-t45-18 9 14 9 12.7 115 4 1/2" 3 1
    9 14 9 14 127 5″ 3 1
    Pusat Drop
     tombolbit-t45-d11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     tombolbit-t45-d13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12.7 / 12.7 89 3 1/2" 4 0
     tombolbit-t45-d14 8 11 4/2 11 / 9.5 83 3 1/4" 4 1
    8 11 4/2 11 / 9.5 89 3 1/2" 4 1
     tombolbit-t45-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14/11 115 4 1/2" 4 0
    Pasuryan Flat / Retrac
     tombolbit-t45-fr9 6 12.7 3 12.7 76 3″ 3 1
     tombolbit-t45-fr10 6 14 4 14 89 3 1/2" 3 0
     tombolbit-t45-fr13 8 12.7 5 10 76 3″ 4 0
    8 12.7 5 12.7 89 3 1/2" 4 2
     tombolbit-t45-fr14 8 11 6 11 76 3″ 2 0
    8 12.7 6 11 82 3 1/4" 2 0
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2" 2 0
     tombolbit-t45-fr16 8 16 8 14 127 5″ 2 0
    Drop Center / Retrac
     tombolbit-t45-dr10 6 11 3/1 11 / 9.5 70 2 3/4" 3 0
    6 12.7 3/1 11 / 9.5 76 3″ 3 0
     tombolbit-t45-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     tombolbit-t45-dr13 8 11 4/1 10/10 76 3″ 4 0
    8 12.7 4/1 12.7 / 12.7 89 3 1/2" 4 0
     tombolbit-t45-dr14 8 11 4/2 11 / 9.5 89 3 1/2" 4 1
     tombolbit-t45-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1
    8 14 4/3 14 / 12.7 115 4 1/2" 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 2

     

    T45 Cross bit Ukuran karbida Ukuran D Flushing bolongan
    Jembar dhuwur
    [mm] [mm] [mm] [ing] Ngarep Sisih
     crossbit-t45 12.7 25 76 3″ 1 4
    12.7 25 89 3 1/2" 1 4
    16 25 102 4″ 1 4

     

    T45 – T45 – Rd 46 1-3/4″ BENANG TRAPEZOIDAL (45mm) Karburisasi
     t45drillrod D LENGAN (L) BENANG
    mm FT Lifit bener
    RD 46 1000 3′ 3″ T45 T45
    RD 46 1220 4' T45 T45
    RD 46 1500 4′ 11″ T45 T45
    RD 46 1525 5' T45 T45
    RD 46 1830 6' T45 T45
    RD 46 2000 6′ 7″ T45 T45
    RD 46 2435 8' T45 T45
    RD 46 3000 9′ 10″ T45 T45
    RD 46 3050 10′ T45 T45
    RD 46 3660 12′ T45 T45
    RD 46 4265 14′ T45 T45
    RD 46 4875 16′ T45 T45
    RD 46 5490 18′ T45 T45
    RD 46 6095 20′ T45 T45
    TANDEM THREAD T45 – T45 – Rd 46 1-3/4″ TRAPEZOIDAL THREAD (45mm) Carburized
     t45drillrod-tandem-thread D LENGAN (L) BENANG
    mm FT Lifit bener
    RD 39 3050 10′ T45/T45 T45/T45
    RD 39 3660 12′ T45/T45 T45/T45
    RD 39 4265 14′ T45/T45 T45/T45
    MF-Rod T45 – T45 – Rd 46 1-3/4″ BENANG TRAPEZOIDAL (45mm) Karburisasi
     t45mfd D LENGAN (L) BENANG
    mm FT Lifit bener
    64 1000 3′ 3″ T45F T45
    64 1220 4' T45F T45
    64 1500 4′ 11″ T45F T45
    64 1525 5' T45F T45
    64 1830 6' T45F T45
    64 2000 6′ 7″ T45F T45
    64 2435 8' T45F T45
    64 3000 9′ 10″ T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    64 4880 16′ T45F T45
    64 5490 18′ T45F T45
    64 6100 20′ T45F T45
    MF-Tube T45 – T45 – Rd 64 1-3/4″ BENANG TRAPEZOIDAL (45mm) X 2-1/2″ BABAK (64mm) Karburisasi
     t45mftube D LENGAN (L) BENANG
    mm FT Lifit bener
    64 1220 4' T45F T45
    64 1525 5' T45F T45
    64 1830 6' T45F T45
    64 2440 8' T45F T45
    64 3050 10′ T45F T45
    64 3660 12′ T45F T45
    64 4270 14′ T45F T45
    MF-Tube T45 – T45 – Rd 76 1-3/4″ BENANG TRAPEZOIDAL (45mm) X 2-1/2″ BABAK (64mm) Karburisasi
     t45mftube D LENGAN (L) BENANG
    mm FT Lifit bener
    76 1220 4' T45F T45
    76 1525 5' T45F T45
    76 1830 6' T45F T45
    76 2440 8' T45F T45
    76 3050 10′ T45F T45
    76 3660 12′ T45F T45

    t51

    Tombol bit Ukuran karbida Ukuran D Flushing bolongan
    Gauge Ngarep
    [Ora.] [mm] [Ora.] [mm] [mm] [ing] Ngarep Sisih
     tombolbit-t51-f10 6 14 4 14 89 3 1/2" 3 0
     tombolbit-t51-f14 8 12.7 6 11 82 3 1/4" 2 1
    8 12.7 6 11 82 3 1/4" 2 1
    8 12.7 6 11 85 3 3/8" 2 1
    8 12.7 6 11 85 3 3/8" 2 1
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 12.7 6 12.7 89 3 1/2" 2 2
    8 14 6 14 102 4″ 2 0
    8 14 6 14 102 4″ 2 0
    8 16 6 14 115 4 1/2" 2 0
    8 16 6 14 115 4 1/2" 2 0
     tombolbit-t51-f16 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2" 2 0
     tombolbit-t51-f13 8 12.7 5 12.7 89 3 1/2" 4 2
     tombolbit-t51-f14-2 8 14 6 12.7 102 4″ 4 2
     tombolbit-t51-f15 8 14 7 14 115 4 1/2" 4 2
    8 16 7 14 121 4 3/4" 4 2
     tombolbit-t51-f16 8 16 8 14 127 5″ 4 2
     buttonbit-t51-f16-2 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2" 2 0
     tombolbit-t51-f17 9 11 8 10 89 3 1/2" 3 1
    9 12.7 8 12.7 102 4″ 3 1
     tombolbit-t51-fr18 9 14 9 12.7 115 4 1/2" 3 1
    9 14 9 14 127 5″ 3 1
     tombolbit-t51-f19 10 14 9 12.7 115 4 1/2" 5 0
    10 16 7 16 127 5″ 5 0
    10 16 8 16 140 5 1/2" 5 0
    Pusat Drop
     tombolbit-t51-d11 6 12.7 3/2 11 / 9.5 80 3 1/8" 3 0
    6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     tombolbit-t51-d13 8 12.7 4/1 12.7 / 12.7 89 3 1/2" 4 0
     tombolbit-t51-d14 8 11 4/2 11 / 9.5 89 3 1/2" 4 0
     tombolbit-t51-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2" 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 0
     tombolbit-t51-d16 8 16 4/4 16 / 14 140 5 1/2" 4 0
     tombolbit-t51-d18 10 14 5/3 12.7 / 12.7 115 4 1/2" 5 0
    10 16 5/3 16 / 12.7 127 5″ 5 0
    10 16 5/3 16 / 14 140 5 1/2" 5 0
    Pasuryan Flat / Retrac
     tombolbit-t51-fr10 6 14 4 14 89 3 1/2" 3 0
     tombolbit-t51-fr14 8 12.7 6 11 82 3 1/4" 2 1
    8 12.7 6 12.7 89 3 1/2" 2 0
    8 12.7 6 12.7 93 3 11/16" 2 0
    8 12.7 6 12.7 95 3 3/4" 2 0
    8 14 6 14 102 4″ 2 1
    8 16 6 14 115 4 1/2" 2 0
     tombolbit-t51-fr16 8 16 8 14 127 5″ 2 0
    8 16 8 16 140 5 1/2" 2 0
     tombolbit-t51-fr17 9 11 8 10 89 3 1/2" 3 1
    9 12.7 8 12.7 102 4″ 3 1
     tombolbit-t51-fr18 9 14 9 12.7 115 4 1/2" 3 1
    9 14 9 14 127 5″ 3 1
     tombolbit-t51-fr13 8 12.7 5 12.7 89 3 1/2" 4 2
     buttonbit-t51-fr14-2 8 14 6 12.7 102 4″ 4 2
     tombolbit-t51-fr15 8 14 7 14 115 4 1/2" 4 2
     tombolbit-t51-fr16 8 16 8 14 127 5″ 4 2
    8 14 8 14 127 5″ 4 2
    Drop Center / Retrac
     tombolbit-t51-dr11 6 14 3/2 12.7 / 9.5 89 3 1/2" 3 0
     tombolbit-t51-dr13 8 12.7 4/1 12.7 / 12.7 89 3 1/2" 4 0
     tombolbit-t51-dr14 8 11 4/2 11 / 9.5 89 3 1/2" 4 1
    8 12.7 4/2 11 / 9.5 89 3 1/2" 4 1
    8 12.7 4/2 12.7 / 9.5 93 3 11/16" 4 0
     tombolbit-t51-dr15 8 14 4/3 12.7 / 11 102 4″ 4 1
    8 14 4/3 14 / 12.7 115 4 1/2" 4 0
    8 16 4/3 16 / 12.7 127 5″ 4 0
     tombolbit-t51-dr16 8 16 4/4 16 / 14 140 5 1/2" 4 0

    st58

    Tombol bit Ukuran karbida Ukuran D Flushing bolongan
    Gauge Ngarep
    [Ora.] [mm] [Ora.] [mm] [mm] [ing] Ngarep Sisih
    Pasuryan Flat / Retrac
     buttonbit-st58-fr17 9 11 8 10 89 3 1/2" 3 1
    9 12.7 8 11 93 3 11/16" 3 1
    9 12.7 8 12.7 102 4″ 3 1
    Drop Center / Retrac
     tombolbit-st58-dr14 8 11 4/2 11 / 9.5 89 3 1/2" 4 1
    8 12.7 4/2 12.7 / 9.5 93 3 11/16" 4 0
     tombolbit-st58-dr15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2" 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 0

     

    MF-Rod ST58 – ST58 – Rd 60 2-1/4″ BENANG TRAPEZOIDAL (58mm) Karburisasi
     st58mfd D LENGAN (L) BENANG
    mm FT Lifit bener
    81 3660 12′ ST58F ST58
    81 4270 14′ ST58F ST58
    81 5490 18′ ST58F ST58
    81 6100 20′ ST58F ST58
    MF-Tube ST58 – ST58 – Rd 76 2-1/4″ BENANG TRAPEZOIDAL (58mm) X 3″ BABAK (76mm) Karburisasi
     st58mftube D LENGAN (L) BENANG
    mm FT Lifit bener
    76 1220 4' ST58F ST58
    76 1525 5' ST58F ST58
    76 1830 6' ST58F ST58
    76 2440 8' ST58F ST58
    76 3050 10′ ST58F ST58
    76 3660 12′ ST58F ST58
    76 4270 14′ ST58F ST58
    76 5200 17′ 3/4″ ST58F ST58

    gt60

    Tombol bit Ukuran karbida Ukuran D Flushing bolongan
    Gauge Ngarep
    [Ora.] [mm] [Ora.] [mm] [mm] [ing] Ngarep Sisih
     tombolbit-gt60-f14 8 12.7 6 12.7 93 3 11/16" 2 0
    8 12.7 6 12.7 95 3 3/4" 2 0
     buttonbit-gt60-f14-2 8 14 6 12.7 102 4″ 4 2
    8 16 6 12.7 102 4″ 4 2
     tombolbit-gt60-f15 8 14 7 14 115 4 1/2" 4 2
     tombolbit-gt60-f16 8 16 8 14 127 5″ 4 2
     tombolbit-gt60-f18 9 14 9 12.7 115 4 1/2" 3 1
    9 14 9 14 127 5″ 3 1
     tombolbit-gt60-fs19 10 14 9 12.7 115 4 1/2" 5 0
    10 16 7 16 127 5″ 5 0
    10 16 8 16 140 5 1/2" 5 0
    10 16 8 16 152 6″ 5 0
    Pusat Drop
     tombolbit-gt60-d14 8 12.7 4/2 12.7 / 9.5 93 3 11/16" 4 0
    8 12.7 4/2 12.7 / 9.5 95 3 3/4" 4 0
     tombolbit-gt60-d15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2" 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 1
     tombolbit-gt60-d16 8 16 4/4 16 / 14 140 5 1/2" 4 2
    8 16 6/4 16 / 14 152 6″ 4 0
     tombolbit-gt60-ds18 10 14 5/3 12.7 / 12.7 16 / 12.7 115 4 1/2" 5 0
    10 16 5/3 127 5″ 5 0
    10 16 5/4 16 / 14 140 5 1/2" 5 0
    Pasuryan Flat / Retrac
     tombolbit-gt60-fr14 8 12.7 6 12.7 93 3 11/16" 2 0
    8 12.7 6 12.7 95 3 3/4" 2 0
     tombolbit-gt60-fr18 9 12.7 9 11 93 3 11/16" 1 0
     buttonbit-gt60-fr18-2 9 12.7 9 12.7 93 3 11/16" 2 0
     buttonbit-gt60-fr14-2 8 14 6 12.7 102 4″ 4 2
     buttonbit-gt60-fr15 8 14 7 14 115 4 1/2" 4 2
     tombolbit-gt60-fr16 8 16 8 14 127 5″ 4 2
     tombolbit-gt60-fr17 9 12.7 8 11 93 3 11/16" 3 1
    9 12.7 8 12.7 102 4″ 3 1
     buttonbit-gt60-fr18-2 9 14 9 12.7 102 4″ 3 1
    9 14 9 12.7 115 4 1/2" 3 1
    9 14 9 14 127 5″ 3 1
    9 16 9 16 127 5″ 3 1
    Drop Center / Retrac
     tombolbit-gt60-dr14 8 12.7 4/2 12.7 / 9.5 93 3 11/16" 4 0
    8 12.7 4/2 12.7 / 9.5 95 3 3/4" 4 0
     tombolbit-gt60-dr15 8 14 4/3 12.7 / 11 102 4″ 4 0
    8 14 4/3 14 / 12.7 115 4 1/2" 4 1
    8 16 4/3 16 / 12.7 127 5″ 4 0
      buttonbit-gt60-drs18 10 14 5/3 12.7 / 12.7 115 4 1/2" 5 0
    10 16 5/3 16 / 12.7 127 5″ 5 0
    10 16 5/4 16 / 14 140 5 1/2" 5 0

     

    MF-Rod GT60 – GT60 – Rd 64 2-1/4″ BENANG TRAPEZOIDAL (60mm) 3-3/8″ OD WANITA (85MM) Karburisasi
     gt60mfrod D LENGAN (L) BENANG
    mm FT Lifit bener
    85 3660 12′ GT60F GT60
    85 4270 14′ GT60F GT60
    85 6100 20′ GT60F GT60
    MF-Tube GT60 – GT60 – Rd 76 2-1/4″ BENANG TRAPEZOIDAL (60mm) X 3″ BABAK (76mm) Karburisasi
     gt60mftube D LENGAN (L) BENANG
    mm FT Lifit bener
    76 1220 4' GT60F GT60
    76 1525 5' GT60F GT60
    76 1830 6' GT60F GT60
    76 2440 8' GT60F GT60
    76 3050 10′ GT60F GT60
    76 3660 12′ GT60F GT60
    76 4270 14′ GT60F GT60
    76 5200 17′ 3/4″ GT60F GT60
    Tombol bit Ukuran karbida Ukuran D Flushing bolongan
    Gauge Ngarep
    [Ora.] [mm] [Ora.] [mm] [mm] [ing] Ngarep Sisih
     ST68-1 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2" 4 0
    Pandhuan Retrac
     ST68-2 8 12 10 12 102 4″ 4 0
    8 12 10 12 102 4″ 4 0
    8 14 10 14 115 4 1/2" 4 0
    8 12 10 12 102 4″ 4 0
    Tugas abot
     ST68-3 6 12 8 14 89 3 1/2" 2 0
    Collaring bit
     ST68-4 8 16 9 16 152 6″ 3 0
    Retrac bit, Tugas abot
     ST68-5 5 14 8 16 102 4″ 2 0
    Reaming bit
     ST68-6 4 16 8 16 152 4 1/2" 4
    9 16 9 16 204 5″ 3 0
    9 16 9 18 254 4 1/2" 3 0

     

     ST68 D LENGAN (L) BENANG
    mm FT Lifit bener
    87 1525 5' ST68F ST68
    87 1830 6' ST68F ST68

    Produk sing gegandhengan

    Adaptor Shank

    Adaptor Shank

    Batang pengeboran

    Batang pengeboran

    Utas tombol bit

    Utas tombol bit

    Obrolan Online WhatsApp!