Siostam acair fèin-drileadh
Tha acair air a chleachdadh gu farsaing ann an tunail airson ro-thaic, leathad, oirthir, mèinnean, pròiseactan glèidhteachais uisge, Bun-stèidh togail, daingneachadh leabaidh rathaid agus làimhseachadh lochtach geòlais leithid maoim-slèibhe, sgàineadh, agus aois sinc, chan urrainnear a chuir na àite ann an àrainneachd togail chumhang.
BUIDHEANAN
Siostam acair bàr falamh fèin-drileadh:
Air a dhèanamh suas de bhàr snàithleach falamh ceangailte le pìos drile a bhios a’ drileadh.Tha am bàr falamh a’ leigeil le èadhar is uisge a dhol tron bhàr gu saor aig àm drileadh gus sprùilleach a thoirt air falbh, às deidh drileadh aig an doimhneachd a tha a dhìth a bhith air a chrìochnachadh, bidh grout a ’lìonadh a’ bhàr lag tron chuideam airson an riatanas agus a ’còmhdach a’ bholt gu lèir.
Coupler: Faodar an càraid a chleachdadh gus a dhol còmhla ri bàraichean falamh agus fad a ’bhollaidh a leudachadh, tha e a’ ciallachadh gum faodar an acair a leudachadh leis na càraidean.
Truinnsear agus cnò: Tha an truinnsear agus an cnò air an cur a-steach a rèir an riatanas dealbhaidh.
Pìos drile: Bhiodh am pìos drile air a thaghadh a rèir suidheachadh na talmhainn.
R25 Fèin-drileadh Anchor
Bàr Anchor Hollow | |||||
| Meud | Dia a-muigh. | Dia a-staigh. | Ultimate Load | Luchdaich toradh | Cuideam |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| R25-12 | 25 | 12 | 200 | 150 | 2.35 |
Drill Bit | ||||
| Seòrsa | Dia a-muigh. | Cuideam | Raon Iarrtais (Comhairle) | |
| (mm) | (òirlich) | (Kg) | ||
| Tilg pìos croise | 42 | 1.65 | 0.35 | Tilg pìos croise airson gainmheach is greabhal |
| 51 | 2 | 0.38 | ||
| Pìos croise stàilinn | 42 | 1.65 | 0.3 | Crois chruaidh cruaidh airson suidheachaidhean sgaoilte gu meadhanach dùmhail le ulpagan beaga. |
| 51 | 2 | 0.4 | ||
| TC crois-phìos | 42 | 1.65 | 0.35 | Crois-phìos TC airson cumaidhean creige bog gu meadhanach |
| 51 | 2 | 0.45 | ||
Càraid | ||||
| Meud | Dia a-muigh. | Fad | Cuideam | Thoir an aire |
| (mm) | (mm) | (kg/pc) | ||
| R25-S | 36 | 150 | 0.66 | Le structar ròin |
| R25-E | 36 | 150 | 0.66 | Gun structar seulachaidh |
Cnò heics | ||||
| Meud | Meud iuchrach | Fad | Cuideam | cruas |
| (mm) | (mm) | (kg/pc) | (HRC) | |
| R25-S | 41 | 30 | 0.2 | 25-30 |
Plàta Domed | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| R25-E | 150 × 150 | 8 | 30 | 1.4 |
| 150 × 150 | 5 | 28 | 0.85 | |
| 200 × 200 | 8 | 32 | 3.2 | |
R32 Fèin-drileadh Anchor
Bàr Anchor Hollow | |||||
| Meud | Dia a-muigh. | Dia a-staigh. | Ultimate Load | Luchdaich toradh | Cuideam |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R32/20 | 32 | 20 | 210 | 160 | 2.83 |
| S-R32/17 | 32 | 17 | 280 | 230 | 3.5 |
| S-R32/15 | 32 | 15 | 360 | 280 | 4 |
| E-R32/21 | 32 | 21 | 210 | 160 | 2.6 |
| E-R32/19 | 32 | 19 | 280 | 230 | 2.95 |
| E-R32/17 | 32 | 17 | 360 | 280 | 3.5 |
| E-R32/15 | 32 | 15 | 405 | 320 | 4 |
| C-R32/21 | 32 | 21 | 250 | 190 | 2.6 |
| C-R32/20 | 32 | 20 | 280 | 230 | 2.83 |
| C-R32/17.5 | 32 | 17.5 | 360 | 280 | 3.4 |
Drill Bit | |||
| Seòrsa | Dia a-muigh. | Cuideam | Raon Iarrtais (Comhairle) |
| (mm) | (Kg) | ||
| Tilg pìos croise | 51 mm | 0.99 | Tilg pìos croise airson gainmheach is greabhal |
| Pìos croise stàilinn | 51 mm | 0.88 | Pìos stàilinn cruaidh airson suidheachaidhean talmhainn sgaoilte gu meadhanach dùmhail |
| 76 mm | 2.87 | ||
| Stàilinn 3 pìos gearraidh | 76 mm | 2.65 | |
| TC crois-phìos | 51 mm | 0.99 | TC cuir a-steach pìos airson cumaidhean creige bog gu meadhanach |
| TC 3 pìos gearraidh | 76 mm | 2.87 | |
| Stàilinn boghach | 51 mm | 0.99 | Pìos bogha cruaidh airson geoimeatraidh leasaichte airson ùir neo-dhaingnichte le ulpagan beaga |
| Bogha boghach TC | 51 mm | 0.99 | Pìos bogha TC airson geoimeatraidh làn-leasaichte airson cumaidhean creige bog gu meadhanach |
| Pìos putan stàilinn | 51 mm | 1.32 | Pìos putan cruaidh airson creag neo-dhaingnichte le ulpagan |
| Pìos putan TC | 51 mm | 1.43 | TC cuir a-steach pìos putan airson cruthachadh creag meadhanach |
| EX pìos | 51 mm | 0.88 | Pìos drile crois-ghearraidh cruaidh, freagarrach airson a’ mhòr-chuid de thagraidhean a’ toirt a-steach bannan cumhang de chreig bhog. |
| EXX bit (eile) | 51 mm | 1.1 | Is e EXX am pìos drile as cruaidhe a tha ri fhaighinn, airson creag làidir, claisean cruaidh agus bunaitean concrait. |
Càraid | ||||
| Meud | Dia a-muigh. | Fad | Cuideam | Thoir an aire |
| (mm) | (mm) | (kg/pc) | ||
| SSR32 | 42 | 145 | 0.79 | Le structar ròin |
| 42 | 160 | 0.86 | ||
| 42 | 190 | 1 | ||
| SE32 | 42 | 145 | 0.77 | Gun structar seulachaidh |
| 42 | 160 | 0.84 | ||
| 42 | 190 | 1 | ||
Cnò heics | ||||
| Meud | Meud iuchrach | Fad | Cuideam | cruas |
| (mm) | (mm) | (kg/pc) | (HRC) | |
| SSR32 | 46 | 45 | 0.37 | 25-30 |
| 46 | 55 | 0.46 | ||
| 46 | 60 | 0.47 | ||
Plàta Domed | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| R32-E | 150 × 150 | 8 | 35 | 1.3 |
| 150 × 150 | 5 | 35 | 0.85 | |
| 150 × 150 | 6 | 35 | 1 | |
| 150 × 150 | 10 | 35 | 1.7 | |
| 175 × 175 | 8 | 35 | 1.9 | |
| 200 × 200 | 8 | 35 | 2.6 | |
| 200 × 200 | 10 | 35 | 3.52 | |
| 200 × 200 | 12 | 35 | 2.94 | |
Clàr anchor | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| E-R32 | 95 × 95 | 25 | 35 | 1.6 |
| 120 × 120 | 30 | 35 | 3.2 | |
| 150 × 150 | 8 | 35 | 1.3 | |
| 200 × 200 | 10 | 35 | 3.06 | |
R38 Fèin-drileadh Anchor
Bàr Anchor Hollow | |||||
| Meud | Dia a-muigh. | Dia a-staigh. | Ultimate Load | Luchdaich toradh | Cuideam |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R38/20 | 38 | 20 | 500 | 400 | 5.5 |
| E-R38/22 | 38 | 22 | 500 | 400 | 4.95 |
| E-R38/18 | 38 | 18 | 550 | 430 | 6 |
| C-R38/22.5 | 38 | 22.5 | 500 | 400 | 4.8 |
| C-R38/21 | 38 | 21 | 500 | 400 | 5.25 |
Drill Bit | |||
| Seòrsa | Dia a-muigh. | Cuideam | Raon Iarrtais (Comhairle) |
| (mm) | (Kg) | ||
| Pìos croise stàilinn | 76 mm | 1.2 | Crois chruaidh cruaidh airson suidheachaidhean sgaoilte gu meadhanach dùmhail le ulpagan beaga |
| 90 mm | 1.4 | ||
| Stàilinn boghach | 76 mm | 1.2 | Pìos bogha cruaidh airson geoimeatraidh leasaichte airson ùir neo-dhaingnichte le ulpagan beaga |
| Bogha boghach TC | 115 mm | 2.85 | Pìos bogha TC airson geoimeatraidh làn-leasaichte airson cumaidhean creige bog gu meadhanach |
| TC crois-phìos | 76 mm | 1.25 | Crois-phìos TC airson cumaidhean creige bog gu meadhanach |
| 90 mm | 1.45 | ||
| TC 3 pìos gearraidh | 76 mm | 0.85 | TC cuir a-steach pìos airson cumaidhean creige bog gu meadhanach |
| Pìos putan stàilinn | 76 mm | 1 | Pìos putan cruaidh airson creag neo-dhaingnichte le ulpagan |
| Pìos putan TC | 76 mm | 1 | TC cuir a-steach pìos putan airson cumaidhean creige meadhanach |
Càraid | ||||
| Meud | Dia a-muigh. | Fad | Cuideam | Thoir an aire |
| (mm) | (mm) | (kg/pc) | ||
| S-R38 | 51 | 180 | 1.33 | Le structar ròin |
| 51 | 200 | 1.5 | ||
| 51 | 220 | 1.67 | ||
| E-R38 | 51 | 180 | 1.38 | Gun structar seulachaidh |
| 51 | 200 | 1.55 | ||
| 51 | 220 | 1.68 | ||
Cnò heics | ||||
| Meud | Meud iuchrach | Fad | Cuideam | cruas |
| (mm) | (mm) | (kg/pc) | (HRC) | |
| S-R38 | 50 | 60 | 1.47 | 25-30 |
Plàta Domed | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| E-R38 | 150 × 150 | 8 | 41 | 3.6 |
| 200 × 200 | 12 | 41 | 1.38 | |
Clàr anchor | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| E-R38 | 140 × 140 | 35 | 41 | 5 |
| 150 × 150 | 25 | 41 | 4.1 | |
| 200 × 200 | 12 | 41 | 3.67 | |
R51 Fèin-drileadh Anchor
Bàr Anchor Hollow | |||||
| Meud | Dia a-muigh. | Dia a-staigh. | Ultimate Load | Luchdaich toradh | Cuideam |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R51/34 | 51 | 34 | 580 | 450 | 6.95 |
| S-R51/29 | 51 | 29 | 800 | 630 | 9 |
| E-R51/36 | 51 | 36 | 550 | 430 | 6.15 |
| E-R51/35 | 51 | 35 | 580 | 450 | 6.4 |
| E-R51/31 | 51 | 31 | 800 | 630 | 8.2 |
| C-R51/33 | 51 | 33 | 800 | 630 | 8 |
Drill Bit | |||
| Seòrsa | Dia a-muigh. | Cuideam | Raon Iarrtais (Comhairle) |
| (mm) | (Kg) | ||
| Pìos croise stàilinn | 85 mm | 1.3 | Crois chruaidh cruaidh airson suidheachaidhean sgaoilte gu meadhanach dùmhail le ulpagan beaga |
| TC crois-phìos | 115 mm | 1.8 | Crois-phìos TC airson cumaidhean creige bog gu meadhanach |
| Pìos putan stàilinn | 100 mm | 1.85 | TC cuir a-steach pìos putan airson creag neo-dhaingnichte le ulpagan |
| 115 mm | 2 | ||
| Pìos putan TC | 100 mm | 1.85 | TC cuir a-steach pìos putan airson cumaidhean creige meadhanach |
Càraid | ||||
| Meud | Dia a-muigh. | Fad | Cuideam | Thoir an aire |
| (mm) | (mm) | (kg/pc) | ||
| S-R51 | 63 | 200 | 1.85 | Le structar ròin |
| 63 | 220 | 2 | ||
| E-R51 | 63 | 200 | 1.84 | Gun structar seulachaidh |
| 63 | 220 | 2.13 | ||
Cnò heics | ||||
| Meud | Meud iuchrach | Fad | Cuideam | cruas |
| (mm) | (mm) | (kg/pc) | (HRC) | |
| S-R51 | 75 | 70 | 1.53 | 25-30 |
| 75 | 80 | 1.84 | ||
Plàta Domed | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| E-R38 | 200 × 200 | 15 | 55 | 4.7 |
Clàr anchor | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| E-R51 | 150 × 150 | 40 | 56 | 6.2 |
| 180 × 180 | 45 | 56 | 10.5 | |
| 200 × 200 | 30 | 60 | 8.72 | |
| 250 × 250 | 40 | 60 | 18.9 | |
T30 Fèin-drileadh Anchor
Bàr Anchor Hollow | |||||
| Meud | Dia a-muigh. | Dia a-staigh. | Ultimate Load | Luchdaich toradh | Cuideam |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T30/16 | 30 | 16 | 220 | 180 | 2.9 |
| S-T30/14 | 30 | 14 | 260 | 220 | 3.35 |
| S-T30/11 | 30 | 11 | 320 | 260 | 3.6 |
| E-T30/14 | 30 | 14 | 320 | 260 | 3.35 |
Drill Bit | |||
| Seòrsa | Dia a-muigh. | Cuideam | Raon Iarrtais (Comhairle) |
| (mm) | (Kg) | ||
| Crois air a chruadhachadh | 42mm | 0.30kg | Crois chruaidh cruaidh airson suidheachaidhean talamh sgaoilte gu meadhanach dùmhail |
| 46mm | 0.32kg | ||
| 51mm | 0.40kg | ||
| 76mm | 0.56kg | ||
| TC crois-phìos | 42mm | 0.30kg | Crois-phìos TC airson cumaidhean creige bog gu meadhanach |
| 46mm | 0.32kg | ||
| 51mm | 0.40kg | ||
| Putan putan cruaidh | 42mm | 0.30kg | Pìos putan cruaidh airson creag neo-dhaingnichte le ulpagan |
| 46mm | 0.32kg | ||
| 51mm | 0.40kg | ||
| Pìos putan TC | 46mm | 0.45kg | Pìos putan TC airson cumaidhean creige meadhanach |
| 51mm | 0.69kg | ||
Càraid | ||||
| Meud | Dia a-muigh. | Fad | Cuideam | Thoir an aire |
| (mm) | (mm) | (kg/pc) | ||
| S-T30 | 38 | 105 | 0.39 | Le structar ròin |
| E-T30 | 38 | 105 | 0.45 | Gun structar seulachaidh |
Cnò heics | ||||
| Meud | Meud iuchrach | Fad | Cuideam | cruas |
| (mm) | (mm) | (kg/pc) | (HRC) | |
| S-T30 | 46 | 35 | 0.31 | 25-30 |
Cnò collar spherical | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| S-T30 | 46 | 35 | 0.33 | 290-340 |
Clàr anchor | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| S-T30 | 150 × 150 | 25 | 40 | 4.2 |
| 200 × 200 | 8 | 36 | 2.43 | |
T40 Fèin-drileadh Anchor
Bàr Anchor Hollow | |||||
| Meud | Dia a-muigh. | Dia a-staigh. | Ultimate Load | Luchdaich toradh | Cuideam |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T40/20 | 40 | 20 | 539 | 430 | 6.2 |
| S-T40/16 | 40 | 16 | 660 | 525 | 7.2 |
| E-T40/22 | 40 | 22 | 539 | 430 | 5.7 |
| E-T40/18 | 40 | 18 | 660 | 525 | 6.8 |
Drill Bit | |||
| Seòrsa | Dia a-muigh. | Cuideam | Raon Iarrtais (Comhairle) |
| (mm) | (Kg) | ||
| Crois air a chruadhachadh | 76mm | 0.90kg | Crois chruaidh cruaidh airson suidheachaidhean talamh sgaoilte gu meadhanach dùmhail |
| 90mm | 1.5 kg | ||
| 100mm | 1.65kg | ||
| 115mm | 2.6kg | ||
| TC crois-phìos | 76mm | 1.2kg | Crois-phìos TC airson cumaidhean creige bog gu meadhanach |
| 90mm | 1.75kg | ||
| 100mm | 2kg | ||
| 115mm | 2.8kg | ||
| 130mm | 3.1kg | ||
| 150mm | 5kg | ||
| Crois air a chruadhachadh | 76mm | 1.15kg | Pìos putan cruaidh airson creag neo-dhaingnichte le ulpagan |
| 90mm | 1.68kg | ||
| 100mm | 2.15kg | ||
| 115mm | 2.3kg | ||
| 130mm | 3.15kg | ||
| Pìos putan TC | 76mm | 1.78kg | Pìos putan TC airson cumaidhean creige meadhanach |
| 90mm | 1.4kg | ||
| 100mm | 2kg | ||
| 115mm | 2.8kg | ||
| 130mm | 4.92kg | ||
Càraid | ||||
| Meud | Dia a-muigh. | Fad | Cuideam | Thoir an aire |
| (mm) | (mm) | (kg/pc) | ||
| S-T40 | 54 | 140 | 1.09 | Le structar ròin |
| 57 | 140 | 1.37 | ||
| E-T40 | 54 | 140 | 1.11 | Gun structar seulachaidh |
| 57 | 140 | 1.39 | ||
Cnò heics | ||||
| Meud | Meud iuchrach | Fad | Cuideam | cruas |
| (mm) | (mm) | (kg/pc) | (HRC) | |
| S-T40 | 65 | 50 | 0.92 | 25-30 |
Cnò collar spherical | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| S-T40 | 65 | 50 | 0.86 | 290-340 |
Clàr anchor | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| S-T40 | 115 × 115 | 20 | 56 | 1.6 |
| 125 × 125 | 24 | 56 | 2.4 | |
| 200 × 200 | 12 | 56 | 3.28 | |
| 200 × 200 | 30 | 56 | 8.5 | |
T52 Fèin-drileadh Anchor
Bàr Anchor Hollow | |||||
| Meud | Dia a-muigh. | Dia a-staigh. | Ultimate Load | Luchdaich toradh | Cuideam |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T52/24 | 52 | 24 | 929 | 730 | 10.2 |
| S-T52/26 | 52 | 26 | 929 | 730 | 9.7 |
Càraid | ||||
| Meud | Dia a-muigh. | Fad | Cuideam | Thoir an aire |
| (mm) | (mm) | (kg/pc) | ||
| S-T52 | 70 | 160 | 2.31 | Le structar ròin |
| E-T52 | 70 | 160 | 2.46 | Gun structar seulachaidh |
Cnò heics | ||||
| Meud | Meud iuchrach | Fad | Cuideam | cruas |
| (mm) | (mm) | (kg/pc) | (HRC) | |
| S-T52 | 80 | 70 | 1.94 | 25-30 |
Cnò collar spherical | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| S-T52 | 80 | 70 | 2.3 | 290-340 |
Clàr anchor | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| SST52 | 145 × 145 | 27 | 65 | 3.6 |
| 200 × 200 | 30 | 65 | 8.59 | |
| 220 × 220 | 35 | 65 | 13.1 | |
T76 Fèin-drileadh Anchor
Bàr Anchor Hollow | |||||
| Meud | Dia a-muigh. | Dia a-staigh. | Ultimate Load | Luchdaich toradh | Cuideam |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| E-T76/51 | 76 | 51 | 1600 | 1200 | 16.5 |
| E-T76/45 | 76 | 45 | 1900 | 1500 | 19.7 |
Càraid | ||||
| Meud | Dia a-muigh. | Fad | Cuideam | Thoir an aire |
| (mm) | (mm) | (kg/pc) | ||
| S-T76 | 95 | 200 | 4.26 | Le structar ròin |
| 95 | 220 | 4.8 | ||
Cnò heics | ||||
| Meud | Meud iuchrach | Fad | Cuideam | cruas |
| (mm) | (mm) | (kg/pc) | (HRC) | |
| S-T76 | 100 | 75 | 2.4 | 25-30 |
| 100 | 80 | 2.67 | ||
Cnò collar spherical | |||
| Meud | Meud iuchrach | Fad | Cuideam |
| (mm) | (mm) | (kg/pc) | |
| E-T76 | 95 | 70 | 1.9 |
Clàr anchor | ||||
| Meud | Meudan | Tigheadas | Hola Dia. | Cuideam |
| (mm) | (mm) | (mm) | (kg/pc) | |
| S-T76 | 250 × 250 | 60 | 80 | 27 |
| 250 × 250 | 40 | 80 | 18 | |
