Giotán druil barrchaolaithe
Tapergiotán cnaipemar go bhfuil giotán poll beag difriúil le snáithegiotán cnaipechomh fada poll a úsáid meaitseáil barrchaolaithe le giotán le slat a úsáid le haghaidh cos aeir nó láimhe Jack casúr driller i cairéalú, agus mianadóireacht.
(1)Ceangail shank Méid: Φ19, Φ22, Φ25 ar a mhéad
(2) Trastomhas Giotán: Trastomhas 32mm, 34mm, 36mm, 38mm, 40mm
(3) Nasc barrchaolaithe: 6 céim, 7 céim, 11 céim, 12 céim etc.
(4) Ábhar︰ Barra Cruach Alloy 45CrNiMoV, Leideanna Carbide Tungstain YK05 nó T6.
(5)Cruth Cnaipe ︰ Cineál Aghaidh Bhailistíoch ︰ Aghaidh Mhaol;Corp Giotán ︰Caighdeánach
(6) Qty an cnaipe: 5,7, 8 ríomhaire
(7) príomhmhargadh: ídíonn an India, an Araib, an tSile, an Afraic Theas, tír chloiche an iomarca
Giotán druil barrchaolaithe le haghaidh heics 22mm.
| Trastomhas | Fad | Líon na cnaipí | Cnaipí x trastomhas cnaipe | Tomhsaire | cnaipí uillinn ° | Poll flushing | Meáchan thart. | ||||
| mm | orlach | mm | orlach | mm | mm | Taobh | Ionad | kg | |||
| tomhsaire | ionad | ||||||||||
| Giotán cnaipe – Le haghaidh heicsidheachúlach 22 mm (7/8″).Uillinn barrchaolaithe slat 4°46′.Sciorta Gearr | |||||||||||
| 36 | 1¹³⁄₃₂” | 50 | 1³¹⁄₃₂” | 7 | 5×7 | 2×7 | 35° | - | 1 | 2 | 0.2 |
| Giotán cnaipe – Le haghaidh heicsidheachúlach 22 mm (7/8″).Uillinn barrchaolaithe slat 4°46′.Sciorta fada | |||||||||||
| 33 | 1⁵₁₆" | 71 | 2⁵⁄₃₂ | 7 | 5×8 | 2×7 | 40° | 15° | 1 | 1 | 0.3 |
| 36 | 1¹³⁄₃₂” | 71 | 2⁵⁄₃₂ | 7 | 5×9 | 2×7 | 35° | - | 1 | 1 | 0.3 |
| 41 | 1⅝" | 71 | 2⁵⁄₃₂ | 7 | 5×7 | 2×7 | 35° | - | - | 2 | 0.3 |
| 43 | 1¹¹⁄₁₆" | 71 | 2⁵⁄₃₂ | 7 | 5×9 | 2×8 | 35° | - | 2 | 1 | 0.4 |
| Giotán cnaipe – Le haghaidh heicsidheachúlach 22 mm (7/8″).Uillinn barrchaolaithe slat 7°.Sciorta fada | |||||||||||
| 30 | 1³⁄₁₆” | 80 | 3⁵₃₂” | 7 | 5×6 | 2×7 | 35° | 15° | 2 | 1 | 0.2 |
| 32 | 1¼" | 80 | 3⁵₃₂” | 7 | 5×7 | 2×7 | 35° | 15° | 1 | 1 | 0.3 |
| 33 | 1⁵₁₆" | 80 | 3⁵₃₂” | 8 | 6×7 | 2×7 | 40° | 15° | 1 | 2 | 0.3 |
| 33 | 1⁵₁₆" | 80 | 3⁵₃₂” | 9 | 6×7 | 3×7 | 40° | 20° | 3 | 0.4 | |
| 35 | 1⅜" | 80 | 3⁵₃₂” | 7 | 5×8 | 2×7 | 40° | 15° | 1 | 1 | 0.4 |
| 37 | 1¹⁵⁄₃₂” | 80 | 3⁵₃₂” | 7 | 5×9 | 2×7 | 40° | 15° | 1 | 1 | 0.4 |
| 41 | 1⅝" | 80 | 3⁵₃₂” | 7 | 5×9 | 2×8 | 40° | 15° | 1 | 1 | 0.4 |
| Giotán cnaipe – Le haghaidh heicsidheachúlach 22 mm (7/8″).Slat.uillinn taper 11°.Sciorta gearr. | |||||||||||
| 32 | 1¼" | 55 | 2⁵⁄₃₂ | 8 | 6×7 | 2×7 | 39° | 15° | 1 | 1 | 0.2 |
| 32 | 1¼" | 50 | 1³¹⁄₃₂” | 6 | 4×7 | 2×7 | 35° | - | 1 | 1 | 0.3 |
| 34 | 1¹⁄₃₂” | 50 | 1³¹⁄₃₂” | 5 | 3×8 | 2×7 | 35° | - | 2 | 1 | 0.2 |
| 34 | 1¹⁄₃₂” | 50 | 1³¹⁄₃₂” | 9 | 6×7 | 3×7 | 40° | 20° | 2 | 0.3 | |
| 34 | 1¹⁄₃₂” | 50 | 1³¹⁄₃₂” | 6 | 4×7 | 2×7 | 40° | - | 1 | 1 | 0.2 |
| 35 | 1⅜" | 55 | 2⁵⁄₃₂ | 7 | 5×8 | 2×7 | 40° | 15° | 1 | 1 | 0.3 |
| 36 | 1¹³⁄₃₂” | 50 | 1³¹⁄₃₂” | 7 | 5×8 | 2×7 | 35° | - | 1 | 1 | 0.3 |
| 36 | 1¹³⁄₃₂” | 50 | 1³¹⁄₃₂” | 5 | 3×8 | 2×8 | 40° | - | 2 | 1 | 0.2 |
| 38 | 1½" | 50 | 1³¹⁄₃₂” | 4 | 3×9 | 1×9 | 40° | - | 2 | 1 | 0.3 |
| 38 | 1½" | 50 | 1³¹⁄₃₂” | 7 | 5×9 | 2×7 | 35° | - | 1 | 1 | 0.3 |
| 41 | 1⅝" | 50 | 1³¹⁄₃₂” | 7 | 5×9 | 2×7 | 35° | - | 2 | 1 | 0.3 |
| 43 | 1¹¹⁄₁₆" | 50 | 1³¹⁄₃₂” | 7 | 5×9 | 2×9 | 35° | - | 2 | 1 | 0.4 |
| Giotán cnaipe – Le haghaidh heicsidheachúlach 22 mm (7/8″).Slat.uillinn taper 12°.Sciorta gearr. | |||||||||||
| 27 | 1¹¹⁄₁₆" | 50 | 1³¹⁄₃₂” | 6 | 4×8 | 2×6 | 40° | 15° | 1 | 1 | 0.2 |
| 28 | 1⅛” | 50 | 1³¹⁄₃₂” | 4 | 3×7 | 1×7 | 20° | - | 1 | 1 | 0.1 |
| 28 | 1⅛” | 50 | 1³¹⁄₃₂” | 6 | 4×6 | 2×6 | 35° | - | 1 | 1 | 0.2 |
| 30 | 1³⁄₁₆” | 50 | 1³¹⁄₃₂” | 6 | 4×7 | 2×7 | 30° | - | 1 | 1 | 0.2 |
| 32 | 1¼" | 55 | 2⁵⁄₃₂ | 7 | 5×7 | 2×7 | 35° | - | 1 | 2 | 0.3 |
| 32 | 1¼" | 55 | 2⁵⁄₃₂ | 7 | 5×7 | 2×7 | 35° | - | 1 | 1 | 0.2 |
| 32 | 1¼" | 55 | 2⁵⁄₃₂ | 8 | 6×7 | 2×7 | 39° | 15° | 1 | 2 | 0.3 |
| 33 | 1⁵₁₆" | 55 | 2⁵⁄₃₂ | 7 | 5×7 | 2×7 | 35° | - | 1 | 2 | 0.2 |
| 33 | 1⁵₁₆" | 55 | 2⁵⁄₃₂ | 7 | 5×7 | 2×7 | 35° | - | 1 | 1 | 0.2 |
| 33 | 1⁵₁₆" | 55 | 2⁵⁄₃₂ | 8 | 6×7 | 2×7 | 35° | - | 1 | 2 | 0.2 |
| 33 | 1⁵₁₆" | 55 | 2⁵⁄₃₂ | 7 | 5×8 | 2×7 | 40° | 15° | 1 | 1 | 0.2 |
| 34 | 1¹⁄₃₂” | 55 | 2⁵⁄₃₂ | 7 | 5×8 | 2×7 | 35° | - | 1 | 1 | 0.2 |
| 35 | 1⅜" | 55 | 2⁵⁄₃₂ | 7 | 5×9 | 2×7 | 35° | - | 1 | 1 | 0.2 |
| 36 | 1¹³⁄₃₂” | 55 | 2⁵⁄₃₂ | 7 | 5×9 | 2×7 | 35° | - | 1 | 1 | 0.3 |
| 37 | 1¹⁵⁄₃₂” | 55 | 2⁵⁄₃₂ | 7 | 5×9 | 2×7 | 40° | - | 1 | 1 | 0.3 |
| 38 | 1½" | 55 | 2⁵⁄₃₂ | 7 | 5×9 | 2×7 | 40° | - | 1 | 1 | 0.3 |
| 38 | 1½" | 55 | 2⁵⁄₃₂ | 4 | 3×9 | 1×9 | 40° | - | 1 | 1 | 0.2 |
| 38 | 1½" | 55 | 2⁵⁄₃₂ | 7 | 5×9 | 2×7 | 35° | - | 1 | 1 | 0.2 |
| 38 | 1½" | 55 | 2⁵⁄₃₂ | 7 | 5×9 | 2×7 | 35° | - | 1 | 1 | 0.2 |
| 41 | 1⅝" | 55 | 2⁵⁄₃₂ | 7 | 5×9 | 2×7 | 35° | - | 1 | 1 | 0.3 |
| 45 | 1¾" | 55 | 2⁵⁄₃₂ | 7 | 5×9 | 2×7 | 35° | - | 1 | 1 | 0.3 |
| Giotán cnaipe – Le haghaidh heicsidheachúlach 22 mm (7/8″).Uillinn barrchaolaithe slat 12°.Sciorta fada | |||||||||||
| 32 | 1¼" | 71 | 2²⁵⁄₃₂” | 7 | 5×7 | 2×7 | 35° | - | 1 | 1 | 0.3 |
| 33 | 1⁵₁₆" | 71 | 2²⁵⁄₃₂” | 7 | 5×7 | 2×7 | 35° | - | 1 | 1 | 0.3 |
| 33 | 1⁵₁₆" | 71 | 2²⁵⁄₃₂” | 8 | 6×7 | 2×7 | 40° | 15° | 1 | 2 | 0.3 |
| 33 | 1⁵₁₆" | 71 | 2²⁵⁄₃₂” | 9 | 6×7 | 3×7 | 40° | 20° | 3 | - | 0.3 |
| 35 | 1⅜" | 71 | 2²⁵⁄₃₂” | 8 | 6×8 | 2×7 | 45° | 15° | 1 | 2 | 0.3 |
| 38 | 1½" | 71 | 2²⁵⁄₃₂” | 7 | 5×9 | 2×7 | 35° | - | 1 | 1 | 0.4 |
Giotán druil barrchaolaithe le haghaidh heicsidheachúlach 25mm.
| Trastomhas | Fad | Líon na cnaipí | Cnaipí x trastomhas cnaipe | Tomhsaire | cnaipí uillinn ° | Poll flushing | Meáchan thart. | ||||
| mm | orlach | mm | orlach | mm | mm | Taobh | Ionad | kg | |||
| tomhsaire | ionad | ||||||||||
| Giotán cnaipe – le haghaidh heicsidheachúlach 25 mm (1″).Uillinn barrchaolaithe slat 7°.Sciorta fada | |||||||||||
| 41 | 1⅝" | 71 | 2²⁵⁄₃₂” | 7 | 5×9 | 2×8 | 40° | - | 1 | 1 | 0.4 |
| 41 | 1⅝" | 71 | 2²⁵⁄₃₂” | 7 | 5×9 | 2×8 | 40° | - | 1 | 1 | 0.4 |
| 41 | 1⅝" | 71 | 2²⁵⁄₃₂” | 9 | 6×9 | 3×7 | 40° | - | 1 | 3 | 0.4 |
| 41 | 1⅝" | 71 | 2²⁵⁄₃₂” | 6 | 4×9 | 2×8 | 35° | - | 1 | 1 | 0.2 |
| 43 | 1¹¹⁄₁₆" | 71 | 2²⁵⁄₃₂” | 9 | 6×9 | 3×7 | 40° | - | 1 | 3 | 0.5 |
| 43 | 1¹¹⁄₁₆" | 71 | 2²⁵⁄₃₂” | 6 | 4×9 | 2×8 | 35° | - | 1 | 1 | 0.3 |
| Giotán cnaipe – le haghaidh heicsidheachúlach 25 mm (1″).Uillinn barrchaolaithe slat 12°.Sciorta fada | |||||||||||
| 36 | 1¹³⁄₃₂” | 71 | 2²⁵⁄₃₂” | 7 | 5×9 | 2×7 | 35° | 15° | 1 | 1 | 0.3 |
| 38 | 1½" | 71 | 2²⁵⁄₃₂” | 7 | 5×9 | 2×7 | 40° | 15° | 1 | 1 | 0.4 |
| 41 | 1⅝" | 71 | 2²⁵⁄₃₂” | 7 | 5×9 | 2×7 | 40° | 15° | 1 | 1 | 0.4 |
Trealamh Giotán Trasghearrtha
| Trastomhas | Poll FLUSHING | Gauge carbide | |
| MM | IN | ||
| 7° Giotán CÓRAS | |||
| 32 | 1 1/4" | 1F 2G | 14×8 |
| 35 | 1 3/8" | 1F 2G | 14×8 |
| 41 | 1 5/8" | 2G | 14×8 |
| 45 | 1 3/4" | 2G | 14×8 |
| 11° Giotán CÓRAS | |||
| 38 | 1 1/2" | 1F 4G | 7×8 |
| 12° Giotán CÓRAS | |||
| 28 | 1 1/8″ | 1F 2G | 14X8 |
| 30 | 1 3/16" | 1F 2G | 15X8 |
| 32 | 1 1/4" | 1F 2G | 14X8 |
| 38 | 1 1/2" | 1F 2G | 14X8 |
| 45 | 1 3/4" | 1F 2G | 14X8 |
