Mokhoa oa ho cheka anchor oa ho iketsetsa
Anchoring e sebelisoa haholo kotopong bakeng sa ts'ehetso ea pele, letsoapong, lebopong la leoatle, morafong, mererong ea ho boloka metsi, Motheo oa kaho, matlafatso ea litselana le kalafo e fosahetseng ea jeoloji joalo ka landslip, crack, le sink age, e ke ke ea nkeloa sebaka tikolohong e moqotetsane ea kaho.
MOLEMO
Self Drilling Hollow Bar Anchor System:
E entsoe ka thapo e nang le khoele e kentsoeng ka kotopo e chekang.Sebaka se sekoti se lumella moea le metsi hore li fete ka bolokolohi ka har'a bar nakong ea ho cheka ho tlosa litšila, ka mor'a hore ho cheka ka botebo bo hlokahalang ho phethoe, grout e tlatsa bar e sekoti ka khatello ea tlhokahalo ea bona 'me e koahela ka ho feletseng bolt eohle.
Coupler: The coupler e ka sebelisoa ho kopanya mekoallo e se nang letho le ho atolosa bolelele ba bolt, ho bolela hore ankora e ka holisoa le li-couplers.
Plate le nut: poleiti le linate li kentsoe ho latela tlhokahalo ea moralo.
Drill bit: Karolo ea ho cheka e ne e tla khethoa ha ho khethoa boemo ba fatše.
R25 Self Drilling Anchor
Hollow Anchor Bar | |||||
| Boholo | Dia e Ntle. | Dia ka hare. | Ultimate Mojaro | Yield Mojaro | Boima ba 'mele |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| R25-12 | 25 | 12 | 200 | 150 | 2.35 |
Drill Bit | ||||
| Mofuta | Dia e Ntle. | Boima ba 'mele | Sebaka sa Ts'ebeliso (Keletso) | |
| (mm) | (inch) | (Kg) | ||
| Beha sefapano | 42 | 1.65 | 0.35 | Lahlela sefapano bakeng sa lehlabathe le lehlohlojane |
| 51 | 2 | 0.38 | ||
| Tšepe cross bit | 42 | 1.65 | 0.3 | Sefapano se thatafalitsoeng bakeng sa maemo a teteaneng ho isa ho a mahareng a nang le majoe a manyane. |
| 51 | 2 | 0.4 | ||
| TC cross bit | 42 | 1.65 | 0.35 | TC cross bit bakeng sa libopeho tsa majoe a bonolo ho isa ho a mahareng |
| 51 | 2 | 0.45 | ||
Banyalani | ||||
| Boholo | Dia e Ntle. | Bolelele | Boima ba 'mele | Hlokomela |
| (mm) | (mm) | (Kg/pc) | ||
| R25-S | 36 | 150 | 0.66 | Ka sebopeho sa ho tiisa |
| R25-E | 36 | 150 | 0.66 | Ntle le sebopeho sa ho tiisa |
Hex Nut | ||||
| Boholo | Boholo ba Senotlolo | Bolelele | Boima ba 'mele | Ho thatafala |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| R25-S | 41 | 30 | 0.2 | 25-30 |
Letlapa la Domed | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| R25-E | 150×150 | 8 | 30 | 1.4 |
| 150×150 | 5 | 28 | 0.85 | |
| 200×200 | 8 | 32 | 3.2 | |
R32 Self Drilling Anchor
Hollow Anchor Bar | |||||
| Boholo | Dia e Ntle. | Dia ka hare. | Ultimate Mojaro | Yield Mojaro | Boima ba 'mele |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R32/20 | 32 | 20 | 210 | 160 | 2.83 |
| S-R32/17 | 32 | 17 | 280 | 230 | 3.5 |
| S-R32/15 | 32 | 15 | 360 | 280 | 4 |
| E-R32/21 | 32 | 21 | 210 | 160 | 2.6 |
| E-R32/19 | 32 | 19 | 280 | 230 | 2.95 |
| E-R32/17 | 32 | 17 | 360 | 280 | 3.5 |
| E-R32/15 | 32 | 15 | 405 | 320 | 4 |
| C-R32/21 | 32 | 21 | 250 | 190 | 2.6 |
| C-R32/20 | 32 | 20 | 280 | 230 | 2.83 |
| C-R32/17.5 | 32 | 17.5 | 360 | 280 | 3.4 |
Drill Bit | |||
| Mofuta | Dia e Ntle. | Boima ba 'mele | Sebaka sa Ts'ebeliso (Keletso) |
| (mm) | (Kg) | ||
| Beha sefapano | 51 limilimithara | 0.99 | Lahlela sefapano bakeng sa lehlabathe le lehlohlojane |
| Tšepe cross bit | 51 limilimithara | 0.88 | Tšepe e thata bakeng sa maemo a fatše a teteaneng ho isa ho a mahareng |
| 76 limilimithara | 2.87 | ||
| Tšepe 3 cutter bit | 76 limilimithara | 2.65 | |
| TC cross bit | 51 limilimithara | 0.99 | TC kenya bit bakeng sa libopeho tsa majoe a bonolo ho isa ho a mahareng |
| TC 3 cutter bit | 76 limilimithara | 2.87 | |
| Tšepe arched bit | 51 limilimithara | 0.99 | Hardened arched bit for optimized geometry bakeng sa mobu o sa kopanngoeng o nang le majoe a manyenyane |
| TC e fokotsehile hanyane | 51 limilimithara | 0.99 | TC arched bit bakeng sa geometry e ntlafalitsoeng bakeng sa libopeho tse bonolo ho isa ho tse mahareng tsa mafika |
| Bonyane ba konopo ea tšepe | 51 limilimithara | 1.32 | Hardened button bit for unconsolidated rock le mafika |
| TC konopo hanyane | 51 limilimithara | 1.43 | TC kenya konopo ea bit bakeng sa sebopeho sa majoe a mahareng |
| EX hanyane | 51 limilimithara | 0.88 | Hardened cross cut drill bit, e loketseng boholo ba lits'ebetso ho kenyelletsa le lihlopha tse moqotetsane tsa rock e bonolo. |
| EXX bit(e 'ngoe) | 51 limilimithara | 1.1 | EXX ke boro e thata ka ho fetisisa e fumanehang, bakeng sa lejoe le matla, li-seams tse thata le maoto a konkreite. |
Banyalani | ||||
| Boholo | Dia e Ntle. | Bolelele | Boima ba 'mele | Hlokomela |
| (mm) | (mm) | (Kg/pc) | ||
| SSR32 | 42 | 145 | 0.79 | Ka sebopeho sa ho tiisa |
| 42 | 160 | 0.86 | ||
| 42 | 190 | 1 | ||
| SER32 | 42 | 145 | 0.77 | Ntle le sebopeho sa ho tiisa |
| 42 | 160 | 0.84 | ||
| 42 | 190 | 1 | ||
Hex Nut | ||||
| Boholo | Boholo ba Senotlolo | Bolelele | Boima ba 'mele | Ho thatafala |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| SSR32 | 46 | 45 | 0.37 | 25-30 |
| 46 | 55 | 0.46 | ||
| 46 | 60 | 0.47 | ||
Letlapa la Domed | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| R32-E | 150×150 | 8 | 35 | 1.3 |
| 150×150 | 5 | 35 | 0.85 | |
| 150×150 | 6 | 35 | 1 | |
| 150×150 | 10 | 35 | 1.7 | |
| 175×175 | 8 | 35 | 1.9 | |
| 200×200 | 8 | 35 | 2.6 | |
| 200×200 | 10 | 35 | 3.52 | |
| 200×200 | 12 | 35 | 2.94 | |
Anchor plate | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R32 | 95x95 | 25 | 35 | 1.6 |
| 120×120 | 30 | 35 | 3.2 | |
| 150×150 | 8 | 35 | 1.3 | |
| 200×200 | 10 | 35 | 3.06 | |
R38 Self Drilling Anchor
Hollow Anchor Bar | |||||
| Boholo | Dia e Ntle. | Dia ka hare. | Ultimate Mojaro | Yield Mojaro | Boima ba 'mele |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R38/20 | 38 | 20 | 500 | 400 | 5.5 |
| E-R38/22 | 38 | 22 | 500 | 400 | 4.95 |
| E-R38/18 | 38 | 18 | 550 | 430 | 6 |
| C-R38/22.5 | 38 | 22.5 | 500 | 400 | 4.8 |
| C-R38/21 | 38 | 21 | 500 | 400 | 5.25 |
Drill Bit | |||
| Mofuta | Dia e Ntle. | Boima ba 'mele | Sebaka sa Ts'ebeliso (Keletso) |
| (mm) | (Kg) | ||
| Tšepe cross bit | 76 limilimithara | 1.2 | Sefapano se thatafalitsoeng bakeng sa maemo a teteaneng ho isa ho a mahareng a nang le majoe a manyane |
| 90 limilimithara | 1.4 | ||
| Tšepe arched bit | 76 limilimithara | 1.2 | Hardened arched bit for optimized geometry bakeng sa mobu o sa kopanngoeng o nang le majoe a manyenyane |
| TC e fokotsehile hanyane | 115 limilimithara | 2.85 | TC arched bit bakeng sa geometry e ntlafalitsoeng bakeng sa libopeho tse bonolo ho isa ho tse mahareng tsa mafika |
| TC cross bit | 76 limilimithara | 1.25 | TC cross bit bakeng sa libopeho tsa majoe a bonolo ho isa ho a mahareng |
| 90 limilimithara | 1.45 | ||
| TC 3 cutter bit | 76 limilimithara | 0.85 | TC kenya bit bakeng sa libopeho tsa majoe a bonolo ho isa ho a mahareng |
| Bonyane ba konopo ea tšepe | 76 limilimithara | 1 | Hardened button bit for unconsolidated rock le mafika |
| TC konopo hanyane | 76 limilimithara | 1 | TC kenya konopo ea bit bakeng sa libopeho tsa majoe tse mahareng |
Banyalani | ||||
| Boholo | Dia e Ntle. | Bolelele | Boima ba 'mele | Hlokomela |
| (mm) | (mm) | (Kg/pc) | ||
| S-R38 | 51 | 180 | 1.33 | Ka sebopeho sa ho tiisa |
| 51 | 200 | 1.5 | ||
| 51 | 220 | 1.67 | ||
| E-R38 | 51 | 180 | 1.38 | Ntle le sebopeho sa ho tiisa |
| 51 | 200 | 1.55 | ||
| 51 | 220 | 1.68 | ||
Hex Nut | ||||
| Boholo | Boholo ba Senotlolo | Bolelele | Boima ba 'mele | Ho thatafala |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-R38 | 50 | 60 | 1.47 | 25-30 |
Letlapa la Domed | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R38 | 150×150 | 8 | 41 | 3.6 |
| 200×200 | 12 | 41 | 1.38 | |
Anchor plate | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R38 | 140×140 | 35 | 41 | 5 |
| 150×150 | 25 | 41 | 4.1 | |
| 200×200 | 12 | 41 | 3.67 | |
R51 Self Drilling Anchor
Hollow Anchor Bar | |||||
| Boholo | Dia e Ntle. | Dia ka hare. | Ultimate Mojaro | Yield Mojaro | Boima ba 'mele |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-R51/34 | 51 | 34 | 580 | 450 | 6.95 |
| S-R51/29 | 51 | 29 | 800 | 630 | 9 |
| E-R51/36 | 51 | 36 | 550 | 430 | 6.15 |
| E-R51/35 | 51 | 35 | 580 | 450 | 6.4 |
| E-R51/31 | 51 | 31 | 800 | 630 | 8.2 |
| C-R51/33 | 51 | 33 | 800 | 630 | 8 |
Drill Bit | |||
| Mofuta | Dia e Ntle. | Boima ba 'mele | Sebaka sa Ts'ebeliso (Keletso) |
| (mm) | (Kg) | ||
| Tšepe cross bit | 85 limilimithara | 1.3 | Sefapano se thatafalitsoeng bakeng sa maemo a teteaneng ho isa ho a mahareng a nang le majoe a manyane |
| TC cross bit | 115 limilimithara | 1.8 | TC cross bit bakeng sa libopeho tsa majoe a bonolo ho isa ho a mahareng |
| Bonyane ba konopo ea tšepe | 100 limilimithara | 1.85 | TC kenya konopo bakeng sa lefika le sa kopanngoeng le mafika |
| 115 limilimithara | 2 | ||
| TC konopo hanyane | 100 limilimithara | 1.85 | TC kenya konopo ea bit bakeng sa libopeho tsa majoe tse mahareng |
Banyalani | ||||
| Boholo | Dia e Ntle. | Bolelele | Boima ba 'mele | Hlokomela |
| (mm) | (mm) | (Kg/pc) | ||
| S-R51 | 63 | 200 | 1.85 | Ka sebopeho sa ho tiisa |
| 63 | 220 | 2 | ||
| E-R51 | 63 | 200 | 1.84 | Ntle le sebopeho sa ho tiisa |
| 63 | 220 | 2.13 | ||
Hex Nut | ||||
| Boholo | Boholo ba Senotlolo | Bolelele | Boima ba 'mele | Ho thatafala |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-R51 | 75 | 70 | 1.53 | 25-30 |
| 75 | 80 | 1.84 | ||
Letlapa la Domed | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R38 | 200×200 | 15 | 55 | 4.7 |
Anchor plate | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| E-R51 | 150×150 | 40 | 56 | 6.2 |
| 180×180 | 45 | 56 | 10.5 | |
| 200×200 | 30 | 60 | 8.72 | |
| 250×250 | 40 | 60 | 18.9 | |
T30 Self Drilling Anchor
Hollow Anchor Bar | |||||
| Boholo | Dia e Ntle. | Dia ka hare. | Ultimate Mojaro | Yield Mojaro | Boima ba 'mele |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T30/16 | 30 | 16 | 220 | 180 | 2.9 |
| S-T30/14 | 30 | 14 | 260 | 220 | 3.35 |
| S-T30/11 | 30 | 11 | 320 | 260 | 3.6 |
| E-T30/14 | 30 | 14 | 320 | 260 | 3.35 |
Drill Bit | |||
| Mofuta | Dia e Ntle. | Boima ba 'mele | Sebaka sa Ts'ebeliso (Keletso) |
| (mm) | (Kg) | ||
| Hardened cross bit | 42 limilimithara | 0.30kg | Sefapano se thatafalitsoeng bakeng sa maemo a fatše a teteaneng ho isa ho a mahareng |
| 46 limilimithara | 0.32kg | ||
| 51 limilimithara | 0.40kg | ||
| 76 limilimithara | 0.56kg | ||
| TC cross bit | 42 limilimithara | 0.30kg | TC cross bit bakeng sa libopeho tsa majoe a bonolo ho isa ho a mahareng |
| 46 limilimithara | 0.32kg | ||
| 51 limilimithara | 0.40kg | ||
| Konopo e thata | 42 limilimithara | 0.30kg | Hardened button bit for unconsolidated rock le mafika |
| 46 limilimithara | 0.32kg | ||
| 51 limilimithara | 0.40kg | ||
| TC konopo hanyane | 46 limilimithara | 0.45kg | TC konopo bit bakeng sa libopeho tsa majoe a mahareng |
| 51 limilimithara | 0.69kg | ||
Banyalani | ||||
| Boholo | Dia e Ntle. | Bolelele | Boima ba 'mele | Hlokomela |
| (mm) | (mm) | (Kg/pc) | ||
| S-T30 | 38 | 105 | 0.39 | Ka sebopeho sa ho tiisa |
| E-T30 | 38 | 105 | 0.45 | Ntle le sebopeho sa ho tiisa |
Hex Nut | ||||
| Boholo | Boholo ba Senotlolo | Bolelele | Boima ba 'mele | Ho thatafala |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T30 | 46 | 35 | 0.31 | 25-30 |
Nate ea Spherical Collar | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T30 | 46 | 35 | 0.33 | 290-340 |
Anchor plate | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T30 | 150×150 | 25 | 40 | 4.2 |
| 200×200 | 8 | 36 | 2.43 | |
T40 Self Drilling Anchor
Hollow Anchor Bar | |||||
| Boholo | Dia e Ntle. | Dia ka hare. | Ultimate Mojaro | Yield Mojaro | Boima ba 'mele |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T40/20 | 40 | 20 | 539 | 430 | 6.2 |
| S-T40/16 | 40 | 16 | 660 | 525 | 7.2 |
| E-T40/22 | 40 | 22 | 539 | 430 | 5.7 |
| E-T40/18 | 40 | 18 | 660 | 525 | 6.8 |
Drill Bit | |||
| Mofuta | Dia e Ntle. | Boima ba 'mele | Sebaka sa Ts'ebeliso (Keletso) |
| (mm) | (Kg) | ||
| Hardened cross bit | 76 limilimithara | 0.90kg | Sefapano se thatafalitsoeng bakeng sa maemo a fatše a teteaneng ho isa ho a mahareng |
| 90 limilimithara | 1.5kg | ||
| 100mm | 1.65kg | ||
| 115 limilimithara | 2.6kg | ||
| TC cross bit | 76 limilimithara | 1.2kg | TC cross bit bakeng sa libopeho tsa majoe a bonolo ho isa ho a mahareng |
| 90 limilimithara | 1.75kg | ||
| 100mm | 2kg | ||
| 115 limilimithara | 2.8kg | ||
| 130 limilimithara | 3.1kg | ||
| 150 limilimithara | 5kg | ||
| Hardened cross bit | 76 limilimithara | 1.15kg | Hardened button bit for unconsolidated rock le mafika |
| 90 limilimithara | 1.68kg | ||
| 100mm | 2.15kg | ||
| 115 limilimithara | 2.3kg | ||
| 130 limilimithara | 3.15kg | ||
| TC konopo hanyane | 76 limilimithara | 1.78kg | TC konopo bit bakeng sa libopeho tsa majoe a mahareng |
| 90 limilimithara | 1.4kg | ||
| 100mm | 2kg | ||
| 115 limilimithara | 2.8kg | ||
| 130 limilimithara | 4.92kg | ||
Banyalani | ||||
| Boholo | Dia e Ntle. | Bolelele | Boima ba 'mele | Hlokomela |
| (mm) | (mm) | (Kg/pc) | ||
| S-T40 | 54 | 140 | 1.09 | Ka sebopeho sa ho tiisa |
| 57 | 140 | 1.37 | ||
| E-T40 | 54 | 140 | 1.11 | Ntle le sebopeho sa ho tiisa |
| 57 | 140 | 1.39 | ||
Hex Nut | ||||
| Boholo | Boholo ba Senotlolo | Bolelele | Boima ba 'mele | Ho thatafala |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T40 | 65 | 50 | 0.92 | 25-30 |
Nate ea Spherical Collar | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T40 | 65 | 50 | 0.86 | 290-340 |
Anchor plate | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T40 | 115 × 115 | 20 | 56 | 1.6 |
| 125 × 125 | 24 | 56 | 2.4 | |
| 200×200 | 12 | 56 | 3.28 | |
| 200×200 | 30 | 56 | 8.5 | |
T52 Self Drilling Anchor
Hollow Anchor Bar | |||||
| Boholo | Dia e Ntle. | Dia ka hare. | Ultimate Mojaro | Yield Mojaro | Boima ba 'mele |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| S-T52/24 | 52 | 24 | 929 | 730 | 10.2 |
| S-T52/26 | 52 | 26 | 929 | 730 | 9.7 |
Banyalani | ||||
| Boholo | Dia e Ntle. | Bolelele | Boima ba 'mele | Hlokomela |
| (mm) | (mm) | (Kg/pc) | ||
| S-T52 | 70 | 160 | 2.31 | Ka sebopeho sa ho tiisa |
| E-T52 | 70 | 160 | 2.46 | Ntle le sebopeho sa ho tiisa |
Hex Nut | ||||
| Boholo | Boholo ba Senotlolo | Bolelele | Boima ba 'mele | Ho thatafala |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T52 | 80 | 70 | 1.94 | 25-30 |
Nate ea Spherical Collar | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T52 | 80 | 70 | 2.3 | 290-340 |
Anchor plate | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| SST52 | 145 × 145 | 27 | 65 | 3.6 |
| 200×200 | 30 | 65 | 8.59 | |
| 220×220 | 35 | 65 | 13.1 | |
T76 Self Drilling Anchor
Hollow Anchor Bar | |||||
| Boholo | Dia e Ntle. | Dia ka hare. | Ultimate Mojaro | Yield Mojaro | Boima ba 'mele |
| (mm) | (mm) | (kN) | (kN) | (Kg/m) | |
| E-T76/51 | 76 | 51 | 1600 | 1200 | 16.5 |
| E-T76/45 | 76 | 45 | 1900 | 1500 | 19.7 |
Banyalani | ||||
| Boholo | Dia e Ntle. | Bolelele | Boima ba 'mele | Hlokomela |
| (mm) | (mm) | (Kg/pc) | ||
| S-T76 | 95 | 200 | 4.26 | Ka sebopeho sa ho tiisa |
| 95 | 220 | 4.8 | ||
Hex Nut | ||||
| Boholo | Boholo ba Senotlolo | Bolelele | Boima ba 'mele | Ho thatafala |
| (mm) | (mm) | (Kg/pc) | (HRC) | |
| S-T76 | 100 | 75 | 2.4 | 25-30 |
| 100 | 80 | 2.67 | ||
Nate ea Spherical Collar | |||
| Boholo | Boholo ba Senotlolo | Bolelele | Boima ba 'mele |
| (mm) | (mm) | (Kg/pc) | |
| E-T76 | 95 | 70 | 1.9 |
Anchor plate | ||||
| Boholo | Litekanyo | Botenya | Hole Dia. | Boima ba 'mele |
| (mm) | (mm) | (mm) | (Kg/pc) | |
| S-T76 | 250×250 | 60 | 80 | 27 |
| 250×250 | 40 | 80 | 18 | |
