Soo bandhigida Adapter-ka Shank - Qalabka Cusub ee Kacaanka ee Qodista!
Adapter-ka Shank waa qalab cusub oo awood leh oo wax ka beddelaya adduunka qodista.Qalabkan cusub waxa loogu talagalay in uu gacan ka geysto abuurista hannaan qodid oo hufan oo hufan, kaas oo siinaya faa'iidooyin kala duwan oo cajiib ah hawl-wadeennada iyo ganacsiyada si isku mid ah.
Adapter-ka Shank waa adabtarro si gaar ah loo nashqadeeyey kaas oo isku xidha qaybo kala duwan oo ka mid ah qalabka wax lagu qodayo, isaga oo ka caawinaya hubinta saxnaanta, xawaaraha, iyo waxqabadkaNaqshadeeda gaarka ah, Adapter-ka Shank waxaa loo isticmaali karaa noocyo kala duwan oo codsiyo qodis ah, oo ay ku jiraan qodista macdanta, dhismaha, sahaminta geotechnical, iyo in ka badan.
Mid ka mid ah faa'iidooyinka muhiimka ah ee Adapter-ka Shank waa wax-qabadkiisa.Adabtarka waxaa loo isticmaali karaa noocyo kala duwan oo feeraha ah, oo ay ku jiraan dunta dunta, taper, iyo dubbaha rotary, taas oo ka dhigaysa doorasho ku habboon codsiyada badan ee qodista.Tani waxay ka dhigan tahay dabacsanaan badan iyo kaydinta hawl wadeenada iyo ganacsiyada.
Faa'iidada kale ee Adapter-ka Shank waa in ay ka caawiso in la yareeyo wakhtiga hoos u dhaca inta lagu jiro hawlaha qodista.Naqshaddeeda adag oo waara waxay hubisaa inay u adkeysan karto dhibka isticmaalka culus iyadoo ka xoroonaysa waxyeellada.
Naqshadaynta saxda ah ee Adapter-ka Shank iyo agab tayo sare leh ayaa sidoo kale awood u siinaya in ay bixiso saxnaan sare inta lagu jiro qodista, taas oo lagama maarmaan u ah goobaha ay saxnaanta muhiimka ah tahay.Saxnimadani waxay sidoo kale kordhin kartaa xawaaraha qodista, taasoo keenaysa waqtiyo dhammaystiran oo degdeg ah iyo hoos u dhaca kharashka shaqada.
Faa'iidooyinka deegaanka ee Shank Adapter ayaa sidoo kale mudan in la xuso, maadaama ay yarayso baahida qalabyada qodista ee badan, yaraynta isticmaalka shidaalka iyo qiiqa sii daaya.Waxtarka sare ee ay bixiso waxay sidoo kale horseedi kartaa kharashyada shaqada oo yaraada iyo kharashyada dayactirka oo yaraada.
Gebagebadii, Adapter-ka Shank waa qalab cusub oo kharash-ku-ool ah kaasoo siin kara faa'iidooyin la taaban karo ganacsiyada doonaya inay hagaajiyaan hawlahooda qodista.Kala duwanaanshaheeda, adkeysigeeda, iyo nashqaddeeda saxda ah ayaa ka dhigaysa doorasho ku habboon codsiyo badan oo qodis ah, iyo faa'iidooyinkeeda deegaanka ayaa ka dhigaya doorashada saxda ah ee ganacsiyada raadinaya inay yareeyaan raadkooda kaarboon.Lasoco qalabkan cusub ee kacaanka maanta oo arag faa'iidooyinka naftaada!
EPIROC - BBC 43, 44, 45, 100 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R25 | 380 | 14.96 | 32 | 1.25 | |
R32 | 380 | 14.96 | 32 | 1.25 | |
EPIROC - BBC 51, 52, 54, 120 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 380 | 14 96 | 38 | 150 | |
R38 | 390 | 15 35 | 38 | 150 | |
T38 | 390 | 15.35 | 38 | 1.5 | |
EPIROC - BBE 56U2, 57, 5701 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 537 | 21.14 | 44 | 173 | |
T45 | 550 | 21.65 | 44 | 1.73 | |
EPIROC - COP 1028 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R28 | 400 | 15.75 | 45 | 1.75 | |
R32 | 400 | 15.75 | 45 | 1.75 | |
EPIROC - COP 1036, 1038, 1238 (MALE) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 485 | 19.09 | 38 | 1.5 | |
R38 | 485 | 19.09 | 38 | 1.5 | |
T38 | 485 | 19.09 | 38 | 1.5 | |
R32 | 500 | 19.69 | 38 | 1.5 | |
R38 | 500 | 19.69 | 38 | 1.5 | |
T38 | 500 | 19.69 | 38 | 1.5 | |
R32 | 575 | 22.64 | 38 | 1.5 | |
T38 | 575 | 22.64 | 38 | 1.5 | |
T45 | 500 | 19.69 | 45 | 1.75 | |
R32 | 575 | 22.64 | 45 | 1.75 | |
R38 | 575 | 22.64 | 45 | 1.75 | |
T38 | 575 | 22.64 | 45 | 1.75 | |
T45 | 575 | 22.64 | 45 | 1.75 | |
EPIROC - COP 1036, 1038, 1238 (Dumar) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 710 | 27 95 | 52 | 205 | |
R38 | 710 | 27.95 | 52 | 2.05 | |
TI 30 | 710 | 27.95 | 52 | 2.05 | |
EPIROC - COP 1132 (MALE) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R28 | 410 | 16.14 | 35 | 1.38 | |
R32 | 410 | 16.14 | 35 | 1.38 | |
T35 | 410 | 16.14 | 35 | 1.38 | |
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 500 | 19.69 | 35 | 1.38 | |
T35 | 500 | 19.69 | 35 | 1.38 | |
EPIROC - COP 1132 (Dumar) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 280 | 11.02 | 45 | 1.75 | |
EPIROC - COP 1140, 1435 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 410 | 16.14 | 35 | 1.38 | |
EPIROC - COP 1240, 1640 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 565 | 22.24 | 52 | 2.05 | |
T35 | 565 | 22.24 | 52 | 2.05 | |
T38 | 565 | 22.24 | 52 | 2.05 | |
EPIROC - COP 1240, 1640, 1840, 1850, 2540 PLUS | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 565 | 22 24 | 52 | 205 | |
XT45 * | 565 | 22.24 | 52 | 2.05 | |
T51 | 565 | 22 24 | 52 | 205 | |
XT51 * | 565 | 22.24 | 52 | 2.05 | |
EPIROC - COP 1240 EX, 1640 EX | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 770 | 30 31 | 60 | 236 | |
T38 | 770 | 30.31 | 60 | 2.36 | |
EPIROC - COP 1240 EX, 1640 EX, 1840 EX, 1850 EX, 2150 EX, 2540 EX, 2550 EX | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | In | mm | In | ||
T45 | 770 | 30.31 | 60 | 2.36 | |
T51 | 770 | 30.31 | 60 | 2.36 | |
XT51 * | 770 | 30.31 | 60 | 2.36 | |
EPIROC - COP 1432, 1440, 1532, 1550, 1638, 1838, 2238 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 435 | 17.13 | 38 | 1.5 | |
R38 | 435 | 17.13 | 38 | 1.5 | |
T38 | 435 | 17.13 | 38 | 1.5 | |
R32 | 525 | 20.67 | 38 | 1.5 | |
R38 | 525 | 20.67 | 38 | 1.5 | |
T35 | 525 | 20.67 | 38 | 1.5 | |
T38 | 525 | 20.67 | 38 | 1.5 | |
EPIROC - COP 1432, 1532 (Dumar) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 340 | 13 39 | 55 | 2 17 | |
R38 | 340 | 13.39 | 55 | 2.17 | |
EPIROC - COP 1440, 1550, 1838 (MALE) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 525 | 20.67 | 52 | 2.05 | |
T35 | 525 | 20.67 | 52 | 2.05 | |
T38 | 525 | 20.67 | 52 | 2.05 | |
T45 | 525 | 20.67 | 52 | 2.05 | |
T51 | 525 | 20.67 | 52 | 2.05 | |
EPIROC - COP 1440, 1550, 1838 (Dumar) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 640 | 25.2 | 52 | 2.05 | |
R32 | 640 | 25.2 | 52 | 2.05 | |
R38 | 650 | 25.59 | 52 | 2.05 | |
EPIROC - COP 1838 MUX/HUX | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R35 | 730 | 28.74 | 52 | 2.05 | |
T38 | 730 | 28.74 | 52 | 2.05 | |
T45 | 730 | 28.74 | 52 | 2.05 | |
XT45 * | 730 | 28.74 | 52 | 2.05 | |
T51 | 730 | 28.74 | 52 | 2.05 | |
EPIROC - COP 2150 EX, 2550 EX | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T51 | 770 | 30.31 | 60 | 2.36 | |
EPIROC - COP 2160, 2560 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 770 | 30.31 | 60 | 2.36 | |
T45 | 770 | 30.31 | 60 | 2.36 | |
T51 | 770 | 30.31 | 60 | 2.36 | |
EPIROC - COP 2160 EX, 2560 EX | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 770 | 30.31 | 63 | 2.48 | |
T51 | 770 | 30.31 | 63 | 2.48 | |
XT51 * | 770 | 30.31 | 63 | 2.48 | |
GT60 | 770 | 30.31 | 63 | 2.48 | |
EPIROC - COP 2560 EX PLUS | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 770 | 30 31 | 63 | 2 48 | |
T51 | 770 | 30.31 | 63 | 2.48 | |
XT51 * | 770 | 30.31 | 63 | 2.48 | |
EPIROC - COP 3038 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R38 | 435 | 17.13 | 45 | 1.75 | |
T38 | 435 | 17.13 | 45 | 1.75 | |
T45 | 450 | 17.72 | 45 | 1.75 | |
R32 | 525 | 20.67 | 45 | 1.75 | |
T38 | 525 | 20.67 | 45 | 1.75 | |
EPIROC - COP 3060 ME | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T51 | 840 | 33 07 | 60 | 236 | |
XT60 * | 840 | 33.07 | 60 | 2.36 | |
T-WiZ60 | 840 | 33.07 | 60 | 2.36 | |
EPIROC - COP 3060 MEX | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T51 | 840 | 33.07 | 60 | 2.36 | |
XT60 * | 840 | 33.07 | 60 | 2.36 | |
T-WiZ60 | 840 | 33.07 | 60 | 2.36 | |
EPIROC - COP 4050 MUX | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
ST58 | 835 | 32 87 | 90 | 3 54 | |
ST68 | 835 | 32.87 | 90 | 3.54 |
SANDVIK - HLX 1, RD 106 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R22 | 265 | 10.43 | 28 | 1.1 | |
R25 | 265 | 10.43 | 28 | 1.1 | |
SANDVIK - HL 300 (MALE) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 400 | 15.75 | 32 | 1.25 | |
SANDVIK - HL 300 S (DUMAR) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 245 | 9.65 | 45 | 1.75 | |
SANDVIK - RD 308, RD 314, RD 414, HLX 3 (F) (dhedig) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 205 | 8.07 | 45 | 1.75 | |
SANDVIK - HLR 438 L, 438 T | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 380 | 14 96 | 38 | 150 | |
R38 | 380 | 14.96 | 38 | 1.5 | |
T38 | 380 | 14.96 | 38 | 1.5 | |
SANDVIK - HLX 5, HLX 5 T, HFX 5 T (10 SPLINES) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 500 | 19.69 | 45 | 1.75 | |
R38 | 500 | 19.69 | 45 | 1.75 | |
T38 | 500 | 19.69 | 45 | 1.75 | |
T45 | 500 | 19.69 | 45 | 1.75 | |
R38 | 575 | 22.64 | 45 | 1.75 | |
T38 | 600 | 23.62 | 45 | 1.75 | |
T45 | 600 | 23.62 | 45 | 1.75 | |
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 750 | 29.53 | 45 | 1.75 | |
T38 | 750 | 29.53 | 45 | 1.75 | |
T45 | 750 | 29.53 | 45 | 1.75 | |
SANDVIK - HLX 5 PE-45 (8 SPLINES) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 575 | 22.64 | 45 | 1.75 | |
T35 | 575 | 22.64 | 45 | 1.75 | |
T38 | 575 | 22.64 | 45 | 1.75 | |
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 735 | 28.94 | 45 | 1.75 | |
R38 | 735 | 28.94 | 45 | 1.75 | |
T38 | 735 | 28.94 | 45 | 1.75 | |
T45 | 735 | 28.94 | 45 | 1.75 | |
SANDVIK - HL 500-38, 510-38 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 550 | 21 65 | 38 | 150 | |
R38 | 550 | 21.65 | 38 | 1.5 | |
T38 | 550 | 21.65 | 38 | 1.5 | |
SANDVIK - HL 500-45, 510-45 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 550 | 21.65 | 45 | 1.75 | |
T45 | 550 | 21.65 | 45 | 1.75 | |
SANDVIK - HL 500 S-38, 510 S-38, 510 B, 510 LH | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 450 | 17.72 | 38 | 1.5 | |
T35 | 450 | 17.72 | 38 | 1.5 | |
R38 | 450 | 17.72 | 38 | 1.5 | |
T38 | 450 | 17 72 | 38 | 150 | |
R38 | 500 | 19.69 | 38 | 1.5 | |
SANDVIK - HL 510 S-45, 550 SUPER M92, 560 SUPER | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 500 | 19.69 | 45 | 1.75 | |
R38 | 500 | 19 69 | 45 | 175 | |
T38 | 500 | 19.69 | 45 | 1.75 | |
SANDVIK - RD 520, 525 (10 SPLINES) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R38 | 525 | 20.67 | 45 | 1.75 | |
T38 | 525 | 20.67 | 45 | 1.75 | |
R32 | 600 | 23.62 | 45 | 1.75 | |
T38 | 600 | 23.62 | 45 | 1.75 | |
R32 | 745 | 29.33 | 45 | 1.75 | |
T38 | 745 | 29.33 | 45 | 1.75 | |
SANDVIK - RD 520 PE 45, 525 PE-45 (8 SPLINES) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 600 | 23 62 | 45 | 175 | |
T38 | 600 | 23.62 | 45 | 1.75 | |
R32 | 745 | 29.33 | 45 | 1.75 | |
T35 | 745 | 29.33 | 45 | 1.75 | |
T38 | 745 | 29.33 | 45 | 1.75 | |
SANDVIK - HL 600-45, 600 S-45 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 600 | 23.62 | 45 | 1.75 | |
T45 | 600 | 23.62 | 45 | 1.75 | |
SANDVIK - HL 600-52 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 650 | 25 59 | 52 | 205 | |
T51 | 650 | 25.59 | 52 | 2.05 | |
SANDVIK - HL 650-45, 700-45, 700 T-45, 710-45, 800 T-45, 810 T-45 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 600 | 23 62 | 45 | 175 | |
T45 | 600 | 23.62 | 45 | 1.75 | |
SANDVIK - HL 650-52, 700-52, 700 PE-52, 700 S-52, 710-52, 710 PE-52, 710 S-52, SANDVIK – 710 SPE-52, 800 T-52, 800 PE-52, 810 T-52, HF 810 T-5210 SPE-52, 800 T-52, 800 PE-52, 810 T-52, HF 810 T- 52 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 600 | 23.62 | 52 | 2.05 | |
T45 | 600 | 23 62 | 52 | 205 | |
XT45 * | 600 | 23 62 | 52 | 205 | |
T51 | 600 | 23.62 | 52 | 2.05 | |
XT51 * | 600 | 23.62 | 52 | 2.05 | |
SANDVIK - TAM 750 | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
R32 | 380 | 14.96 | 44 | 1.73 | |
R38 | 380 | 14.96 | 44 | 1.73 | |
T38 | 380 | 14.96 | 44 | 1.73 | |
T45 | 380 | 14.96 | 44 | 1.73 | |
R32 | 446 | 17.56 | 44 | 1.73 | |
R38 | 446 | 17.56 | 44 | 1.73 | |
T38 | 446 | 17.56 | 44 | 1.73 | |
T45 | 446 | 17.56 | 44 | 1.73 | |
SANDVIK - HL 844 | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
R38 | 450 | 17 72 | 44 | 173 | |
T38 | 450 | 17.72 | 44 | 1.73 | |
T45 | 450 | 17.72 | 44 | 1.73 | |
SANDVIK - HL 850 S | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
T45 | 670 | 26 38 | 52 | 205 | |
T51 | 670 | 26.38 | 52 | 2.05 | |
SANDVIK - HL 1000-52, 1000 S 52, 1010-52, 1010 S-52 | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
T45 | 590 | 23.23 | 52 | 2.05 | |
T51 | 590 | 23 23 | 52 | 205 | |
T45 | 670 | 26 38 | 52 | 205 | |
T51 | 670 | 26.38 | 52 | 2.05 | |
SANDVIK - HL 1000-60, 1010-60 | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
ST58 | 670 | 26.38 | 60 | 2.36 | |
GT60 | 670 | 26.38 | 60 | 2.36 | |
SANDVIK - HL 1000 PE-65, 1010 PE-65, 1060 T/PE-65, 1500 T/PE-65, 1560 T/PE-65 | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
T51 | 760 | 29.92 | 65 | 2.56 | |
ST58 | 760 | 29.92 | 65 | 2.56 | |
XT60 * | 760 | 29.92 | 65 | 2.56 | |
GT60 | 760 | 29.92 | 65 | 2.56 | |
T-WiZ60 | 760 | 29.92 | 65 | 2.56 | |
SANDVIK - HL 1000 T-80, 1010 T-80 | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
GT60 | 760 | 29.92 | 80 | 3.15 | |
SANDVIK - HL 1500-60, 1500 T 60 | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
ST58 | 710 | 27.95 | 60 | 2.36 | |
T51 | 760 | 29.92 | 60 | 2.36 | |
GT60 | 760 | 29.92 | 60 | 2.36 | |
SANDVIK - HL 1500-80, 1560 T-80, 1060 T-80, HF 1560 | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
ST58 | 635 | 25 | 80 | 3.15 | |
ST68 | 635 | 25 | 80 | 3.15 | |
GT60 | 760 | 29.92 | 80 | 3.15 | |
XT51 * | 860 | 33.86 | 80 | 3.15 | |
SANDVIK - HL 1500 T/PE-90, 1500 ST/PE-90, 1560 T/PE-90, 1560 ST/PE-90 | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
GT60 | 760 | 29.92 | 90 | 3.54 | |
SANDVIK - RD 1635CF-80 | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
GT60 | 760 | 29.92 | 80 | 3.15 |
FURUKAWA - M 120, HD 200 (4 SPLINES) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 380 | 14.96 | 44 | 1.73 | |
R38 | 380 | 14.96 | 44 | 1.73 | |
T38 | 380 | 14.96 | 44 | 1.73 | |
T45 | 380 | 14.96 | 44 | 1.73 | |
R32 | 446 | 17.56 | 44 | 1.73 | |
R38 | 446 | 17.56 | 44 | 1.73 | |
T38 | 446 | 17.56 | 44 | 1.73 | |
T45 | 446 | 17.56 | 44 | 1.73 | |
FURUKAWA - PD 200 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 380 | 14.96 | 44 | 1.73 | |
R38 | 380 | 14.96 | 44 | 1.73 | |
T38 | 380 | 14.96 | 44 | 1.73 | |
T45 | 380 | 14.96 | 44 | 1.73 | |
R32 | 446 | 17.56 | 44 | 1.73 | |
R38 | 446 | 17.56 | 44 | 1.73 | |
T38 | 446 | 17.56 | 44 | 1.73 | |
T45 | 446 | 17.56 | 44 | 1.73 | |
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 484 | 19.06 | 44 | 1.73 | |
T45 | 484 | 19.06 | 44 | 1.73 | |
FURUKAWA - HD 260 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 537 | 21.14 | 44 | 1.73 | |
T45 | 550 | 21.65 | 44 | 1.73 | |
FURUKAWA - HD 300 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R38 | 655 | 25 79 | 45 | 175 | |
T38 | 655 | 25.79 | 45 | 1.75 | |
T45 | 655 | 25.79 | 45 | 1.75 | |
FURUKAWA - HD 500 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 635 | 25 00 | 56 | 220 | |
T45 | 635 | 25 | 56 | 2.2 | |
T51 | 635 | 25 | 56 | 2.2 | |
FURUKAWA - HD 609 (STD) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R38 | 620 | 24.41 | 45 | 1.75 | |
T38 | 620 | 24.41 | 45 | 1.75 | |
T45 | 620 | 24.41 | 45 | 1.75 | |
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 690 | 27.17 | 45 | 1.75 | |
T45 | 690 | 27.17 | 45 | 1.75 | |
FURUKAWA - HD 612 (STD) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 670 | 26 38 | 51 | 200 | |
T51 | 670 | 26.38 | 51 | 2 | |
FURUKAWA - HD 612 (QED) | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
T45 | 845 | 33 27 | 51 | 200 | |
T51 | 845 | 33.27 | 51 | 2 | |
FURUKAWA - HD 615 (STD) | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
T51 | 700 | 27 56 | 58 | 228 | |
T51 | 880 | 34.65 | 58 | 2.28 | |
FURUKAWA - HD 709 (STD) | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
T38 | 620 | 24 41 | 45 | 175 | |
T45 | 620 | 24.41 | 45 | 1.75 | |
FURUKAWA - HD 709 (QED) | |||||
DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | ||||
THREAD | mm | Gudaha | mm | Gudaha | |
T38 | 785 | 30 91 | 45 | 175 | |
T45 | 785 | 30.91 | 45 | 1.75 | |
T45 | 815 | 32.09 | 45 | 1.75 | |
FURUKAWA - HD 712 (STD) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 590 | 23.23 | 51 | 2 | |
T51 | 590 | 23.23 | 51 | 2 | |
T45 | 790 | 31.1 | 51 | 2 | |
T51 | 790 | 31.1 | 51 | 2 | |
FURUKAWA - HD 712 (QED) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 885 | 34 84 | 51 | 200 | |
T45 | 885 | 34.84 | 51 | 2 | |
T51 | 885 | 34.84 | 51 | 2 | |
FURUKAWA - HD 715 (STD) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T51 | 790 | 31 10 | 58 | 228 | |
FURUKAWA - HD 715 (QED) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T51 | 885 | 34 84 | 58 | 228 | |
FURUKAWA - HD 822, 826 (QED) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T51 | 885 | 34 84 | 51 | 200 |
MONTABERT - HC 20 (MALE) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 287 | 11 30 | 45 | 175 | |
T38 | 300 | 11.81 | 45 | 1.75 | |
MONTABERT - HC 20 (DUMAR) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 187 | 7.36 | 45 | 1.75 | |
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
HEX 22 | 199 | 7.83 | 45 | 1.75 | |
HEX 25 | 199 | 7.83 | 45 | 1.75 | |
MONTABERT - HC 25 (MALE) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 340 | 13.39 | 45 | 1.75 | |
R38 | 350 | 13.78 | 45 | 1.75 | |
T38 | 350 | 13.78 | 45 | 1.75 | |
MONTABERT - HC 25 (DUMAR) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R28 | 202 | 7.95 | 45 | 1.75 | |
R32 | 202 | 7.95 | 45 | 1.75 | |
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
HEX 25 | 218 | 8.58 | 45 | 1.75 | |
MONTABERT - HC 28 (MALE) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T35 | 385 | 15.16 | 45 | 1.75 | |
MONTABERT - HC 258 (Dumar) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 272 | 10.71 | 45 | 1.75 | |
MONTABERT - TA 35, LC 50 (R) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R25 | 380 | 14 96 | 32 | 125 | |
R32 | 380 | 14.96 | 32 | 1.25 | |
MONTABERT - H 40, 50, 60, 70 (LEYNER) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 380 | 14 96 | 38 | 150 | |
R38 | 390 | 15 35 | 38 | 150 | |
T38 | 390 | 15.35 | 38 | 1.5 | |
MONTABERT - HC 40 (MALE) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 372 | 14.65 | 32 | 1.25 | |
MONTABERT - HC 40, 50 (MALE) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 372 | 14.65 | 38 | 1.5 | |
R38 | 380 | 14.96 | 38 | 1.5 | |
T38 | 381 | 15 | 38 | 1.5 | |
R32 | 440 | 17.32 | 38 | 1.5 | |
R38 | 440 | 17.32 | 38 | 1.5 | |
T38 | 447 | 17.6 | 38 | 1.5 | |
MONTABERT - HC 40, 50 (DUMAR) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 270 | 10.63 | 45 | 1.75 | |
MONTABERT - HC 80, 90, 105, 108, 109, 120 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 440 | 17.32 | 38 | 1.5 | |
R38 | 440 | 17.32 | 38 | 1.5 | |
T38 | 440 | 17.32 | 38 | 1.5 | |
R32 | 500 | 19.69 | 38 | 1.5 | |
R38 | 500 | 19.69 | 38 | 1.5 | |
T38 | 500 | 19.69 | 38 | 1.5 | |
MONTABERT - HC 80, 108, 109, 120, 150 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 490 | 19 29 | 45 | 175 | |
T45 | 490 | 19.29 | 45 | 1.75 | |
T38 | 540 | 21.26 | 45 | 1.75 | |
MONTABERT - HC 80 RP, 105 RP, 107 RP, 108 RP, 109 RP | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 670 | 26.38 | 45 | 1.75 | |
T45 | 670 | 26 38 | 45 | 175 | |
T45 | 771 | 30.35 | 45 | 1.75 | |
MONTABERT - HC 95 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R38 | 438 | 17.24 | 45 | 1.75 | |
T38 | 438 | 17.24 | 45 | 1.75 | |
T45 | 453 | 17.83 | 45 | 1.75 | |
R38 | 500 | 19.69 | 45 | 1.75 | |
T38 | 500 | 19.69 | 45 | 1.75 | |
MONTABERT - HC 95 R | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 503 | 19.8 | 45 | 1.75 | |
R38 | 503 | 19.8 | 45 | 1.75 | |
T38 | 503 | 19.8 | 45 | 1.75 | |
T45 | 518 | 20.39 | 45 | 1.75 | |
T45 | 518 | 20.39 | 51 | 2 | |
T51 | 530 | 20.87 | 51 | 2 | |
MONTABERT - H 100 (MALE) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 537 | 21 14 | 44 | 173 | |
T45 | 550 | 21.65 | 44 | 1.73 | |
MONTABERT - HC 110 CA/CS | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R38 | 415 | 16.34 | 45 | 1.75 | |
T38 | 415 | 16.34 | 45 | 1.75 | |
T45 | 425 | 16.73 | 45 | 1.75 | |
T38 | 530 | 20.87 | 45 | 1.75 | |
MONTABERT - HC 110 MT | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R38 | 460 | 18 11 | 45 | 175 | |
T38 | 460 | 18.11 | 45 | 1.75 | |
MONTABERT - HC 112 LH | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T51 | 726 | 28 58 | 60 | 236 | |
GT60 | 726 | 28.58 | 60 | 2.36 | |
MONTABERT - HC 120 RP, 150 RP, 155 RP, 158 RP | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 670 | 26 38 | 51 | 200 | |
T51 | 670 | 26.38 | 51 | 2 | |
T45 | 771 | 30.35 | 51 | 2 | |
T51 | 771 | 30.35 | 51 | 2 | |
MONTABERT - HC 160, 170 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 757 | 29.8 | 60 | 2.36 | |
T45 | 810 | 31.89 | 60 | 2.36 | |
T51 | 810 | 31.89 | 60 | 2.36 | |
XT60 * | 810 | 31.89 | 60 | 2.36 | |
GT60 | 810 | 31.89 | 60 | 2.36 |
INGERSOLL RAND - YH 60 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 537 | 21.14 | 44 | 1.73 | |
T45 | 550 | 21.65 | 44 | 1.73 | |
INGERSOLL RAND - YH 65, 70, 80 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 495 | 19 49 | 45 | 175 | |
T45 | 495 | 19.49 | 45 | 1.75 | |
INGERSOLL RAND - YH 65 RP, 70 RP, 80 RP | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | In | mm | In | ||
T38 | 700 | 27.56 | 45 | 1.75 | |
T45 | 700 | 27.56 | 45 | 1.75 | |
INGERSOLL RAND – YH 80 A | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 495 | 19 49 | 51 | 200 | |
T51 | 495 | 19.49 | 51 | 2 | |
INGERSOLL RAND – YD 90 M | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 330 | 12.99 | 38 | 1.5 | |
R38 | 330 | 12.99 | 38 | 1.5 | |
T38 | 330 | 12.99 | 38 | 1.5 | |
INGERSOLL RAND - YH 95, 100 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 625 | 24 61 | 51 | 200 | |
T51 | 625 | 24.61 | 51 | 2 | |
INGERSOLL RAND - YH 95 RP, 100 RP | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 840 | 33.07 | 51 | 2 | |
T51 | 840 | 33.07 | 51 | 2 | |
INGERSOLL RAND – YH 110 V, 135 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 728 | 28 66 | 55 | 2 17 | |
T51 | 728 | 28.66 | 55 | 2.17 | |
T51 | 890 | 35.04 | 55 | 2.17 | |
INGERSOLL RAND - EVL 130, VL 140 (12 SPLINES) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 349 | 13 74 | 44 | 173 | |
T45 | 349 | 13.74 | 44 | 1.73 | |
T38 | 381 | 15 | 44 | 1.73 | |
T45 | 381 | 15 | 44 | 1.73 | |
INGERSOLL RAND - HYDRASTAR 200 ( FLUSH DHEXE | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | In | mm | In | ||
R32 | 351 | 13.82 | 45 | 1.75 | |
INGERSOL RAND - 350 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R25 | 380 | 14.96 | 32 | 1.25 | |
R32 | 380 | 14.96 | 32 | 1.25 | |
INGERSOLL RAND - URD 475 A, 550, VL 120, VL 140, F16 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 380 | 14.96 | 44 | 1.73 | |
R38 | 380 | 14.96 | 44 | 1.73 | |
T38 | 380 | 14.96 | 44 | 1.73 | |
T45 | 380 | 14.96 | 44 | 1.73 | |
R32 | 446 | 17.56 | 44 | 1.73 | |
R38 | 446 | 17.56 | 44 | 1.73 | |
T38 | 446 | 17.56 | 44 | 1.73 | |
T45 | 446 | 17.56 | 44 | 1.73 |
GARNDER DENVER – HPR 1 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 620 | 24.41 | 45 | 1.75 | |
T45 | 620 | 24.41 | 45 | 1.75 | |
GARDNER DENVER – HPR 1 H | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R38 | 725 | 28.54 | 45 | 1.75 | |
T38 | 725 | 28.54 | 45 | 1.75 | |
T45 | 725 | 28.54 | 45 | 1.75 | |
GARDNER DENVER – HPR 2 H | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 915 | 36 02 | 51 | 200 | |
T51 | 915 | 36.02 | 51 | 2 | |
GARDNER DENVER – 93 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R25 | 380 | 14 96 | 32 | 125 | |
R32 | 380 | 14.96 | 32 | 1.25 | |
GARDNER DENVER - PR 123 (4 SPLINES) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 380 | 14.96 | 44 | 1.73 | |
R38 | 380 | 14.96 | 44 | 1.73 | |
T38 | 380 | 14.96 | 44 | 1.73 | |
T45 | 380 | 14.96 | 44 | 1.73 | |
R32 | 446 | 17.56 | 44 | 1.73 | |
R38 | 446 | 17.56 | 44 | 1.73 | |
T38 | 446 | 17.56 | 44 | 1.73 | |
T45 | 446 | 17.56 | 44 | 1.73 | |
GARDNER DENVER-REEDRILL-CATERPILLAR - HPR 4519 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T38 | 770 | 30 31 | 44 | 173 | |
T45 | 770 | 30.31 | 44 | 1.73 | |
GARDNER DENVER-REEDRILL-CATERPILLAR - HPR 5123 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 770 | 30.31 | 51 | 2 | |
T51 | 770 | 30.31 | 51 | 2 | |
GARDNER DENVER-REEDRILL-CATERPILLAR - HPR 5128 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T45 | 915 | 36.02 | 51 | 2 | |
T51 | 915 | 36.02 | 51 | 2 | |
GARDNER DENVER-REEDRILL-CATERPILLAR - HPR 6030 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
T51 | 1041 | 40 98 | 61 | 240 | |
ST58 | 1041 | 40.98 | 61 | 2.4 | |
XT60 * | 1041 | 40 98 | 61 | 240 | |
GT60 | 1041 | 40.98 | 61 | 2.4 |
SIG - HBM 100 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 380 | 14.96 | 38 | 1.5 | |
R38 | 380 | 14.96 | 38 | 1.5 | |
T38 | 380 | 14.96 | 38 | 1.5 | |
BOART - HD 125, HE 125, HD 150, HE 150 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 495 | 19.49 | 45 | 1.75 | |
R38 | 495 | 19 49 | 45 | 175 | |
T38 | 495 | 19.49 | 45 | 1.75 | |
BOART - SECAN 6 36 IR (4 SPLINES) | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 380 | 14.96 | 44 | 1.73 | |
R38 | 380 | 14.96 | 44 | 1.73 | |
T38 | 380 | 14.96 | 44 | 1.73 | |
T45 | 380 | 14.96 | 44 | 1.73 | |
R32 | 446 | 17.56 | 44 | 1.73 | |
R38 | 446 | 17.56 | 44 | 1.73 | |
T38 | 446 | 17.56 | 44 | 1.73 | |
T45 | 446 | 17.56 | 44 | 1.73 | |
DEMAG - RD 500 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 380 | 14.96 | 44 | 1.73 | |
R38 | 380 | 14.96 | 44 | 1.73 | |
T38 | 380 | 14.96 | 44 | 1.73 | |
T45 | 380 | 14.96 | 44 | 1.73 | |
R32 | 446 | 17.56 | 44 | 1.73 | |
R38 | 446 | 17.56 | 44 | 1.73 | |
T38 | 446 | 17.56 | 44 | 1.73 | |
T45 | 446 | 17.56 | 44 | 1.73 | |
SECOMA – HYDRASTAR 200 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 351 | 13.82 | 45 | 1.75 | |
SECOMA - HYDRASTAR 200, 300, 350, X2 | |||||
THREAD | DHEERKA GUUD (L) | QAYBAHA DHAMMAAN EE HORE | |||
mm | Gudaha | mm | Gudaha | ||
R32 | 485 | 1909 | 38 | 150 | |
R38 | 485 | 19.09 | 38 | 1.5 | |
T38 | 485 | 1909 | 38 | 150 | |
R32 | 500 | 19 69 | 38 | 150 | |
R38 | 500 | 19.69 | 38 | 1.5 | |
T38 | 500 | 19.69 | 38 | 1.5 |
Waqtiga boostada: Meey-26-2023