Rękawy łączące
Stosowany w połączeniu z prętem przedłużającym, jego funkcją jest przenoszenie energii uderzenia z tłoka wiertnicy, a także momentu obrotowego do przewodu wiertniczego bez strat.Musi wytrzymywać i przenosić do 6300 uderzeń tłoka w sposób ciągły, przy zachowaniu dużej wytrzymałości i niezawodności.
Takie jak Coulping R25, Coulping R25/R32, Coulping R28/T38, Coulping R32, Coulping T38,
(1) Rozmiar: R25, R28, R32, R35, R38, T38, T45, T51, R25-R28, R22-R25, R25-R32 R32-R38, R32-T38.
(2) Długość: 140 mm–235 mm
(3) Opakowanie: w drewnianej skrzynce lub w kartonie.
(4) Wydajność: 5000 sztuk / miesiąc
ZŁĄCZA | |||||
NITKA | DŁUGOŚĆ (L) | ŚREDNICA (D) | Waga | ||
mm | In | mm | In | Kg | |
R22 | 140 | 5-1/2 | 30 | 1-3/16 | 0,45 |
R25 | 150 | 5-29/32 | 33 | 1-5/16 | 0,5 |
R25 | 150 | 5-29/32 | 35 | 1-3/8 | 0,52 |
R28 | 150 | 5-29/32 | 39 | 1-17/32 | 0,6 |
R32 | 150 | 5-29/32 | 42 | 1-21/32 | 0,9 |
R32 | 150 | 5-29/32 | 44 | 1-23/32 | 0,95 |
R38 | 170 | 6-11/16 | 55 | 2-5/32 | 1,75 |
T38 | 190 | 7-1/2 | 52 | 2-3/64 | 1.6 |
T38 | 190 | 7-1/2 | 55 | 2-5/32 | 1,95 |
T45 | 210 | 8-1/4 | 63 | 2-15/32 | 2,75 |
T45HD | 210 | 8-1/4 | 66 | 2-19/32 | 3.2 |
T51 | 225 | 8-7/8 | 72 | 2-13/16 | 3,85 |
T51HD | 225 | 8-7/8 | 76 | 3 | 4,68 |
SPRZĘGŁA – Pełny mostek |
| ||||
NITKA | DŁUGOŚĆ (L) | ŚREDNICA (D) | Waga | ||
mm | In | mm | In | Kg | |
R25 | 200 | 7-7/8 | 35 | 1-3/8 | 0,8 |
R28 | 160 | 6-5/16 | 39 | 1-17/32 | 0,7 |
R32 | 200 | 7-7/8 | 44 | 1-23/32 | 1,5 |
R32 | 300 | 11-13/16 | 44 | 1-23/32 | 2.6 |
R38 | 210 | 8-1/4 | 55 | 2-5/32 | 2.6 |
T38 | 205 | 8-1/16 | 55 | 2-5/32 | 2.31 |
T45 | 230 | 9-1/16 | 63 | 2-15/32 | 3.5 |
T51 | 250 | 9-13/16 | 72 | 2-13/16 | 5.3 |
T51 | 250 | 9-13/16 | 76 | 3 | 6.2 |
ADAPTERY SPRZĘGOWE – Półmostek | |||||
NITKA | DŁUGOŚĆ (L) | ŚREDNICA (D) | Waga | ||
(A)-(B) | mm | In | mm | In | Kg |
R22 – R25 | 142 | 5-19/32 | 35 | 1-3/8 | 0,6 |
R25 – R28 | 150 | 5-29/32 | 38 | 1-1/2 | 0,6 |
R25 – R32 | 150 | 5-29/32 | 44 | 1-23/32 | 1.1 |
R28 – R32 | 150 | 5-29/32 | 44 | 1-23/32 | 1.05 |
R28 – R38 | 160 | 6-5/16 | 55 | 2-5/32 | 1,93 |
R28 – T38 | 165 | 6-1/2 | 55 | 2-5/32 | 2.2 |
R32 – R38 | 160 | 6-5/16 | 55 | 2-5/32 | 1.8 |
R32 – T38 | 165 | 6-1/2 | 55 | 2-5/32 | 2.1 |
R38 – T38 | 180 | 7-1/16 | 55 | 2-5/32 | 1.8 |
R38 – T45 | 195 | 7-11/16 | 63 | 2-15/32 | 2.8 |
T38 – T45 | 195 | 7-11/16 | 63 | 2-15/32 | 2.8 |
T45 – T51 | 218 | 8-19/32 | 72 | 2-13/16 | 4.35 |
ADAPTERY SPRZĘGOWE – Pełny mostek | |||||
NITKA | DŁUGOŚĆ (L) | ŚREDNICA (D) | Waga | ||
(A) - (B) | mm | W. | mm | W. | Kg |
R22 – R25 | 165 | 6-1/2 | 35 | 1-3/8 | 0,82 |
R25 – R28 | 170 | 6-11/16 | 39 | 1-17/32 | 1 |
R25 – R32 | 200 | 7-7/8 | 44 | 1-23/32 | 1.7 |
R25 – R38 | 170 | 6-11/16 | 55 | 2-5/32 | 2 |
R25 – T38 | 170 | 6-11/16 | 55 | 2-5/32 | 1.9 |
R28 – R32 | 170 | 6-11/16 | 44 | 1-23/32 | 1.3 |
R28 – T38 | 170 | 6-11/16 | 55 | 2-5/32 | 2.4 |
R32 – T35 | 170 | 6-11/16 | 49 | 1-29/32 | 2 |
R32 – R38 | 205 | 8-1/16 | 55 | 2-5/32 | 2.6 |
R32 – T38 | 205 | 8-1/16 | 55 | 2-5/32 | 2.6 |
R32 – T45 | 215 | 8-15/32 | 63 | 2-15/32 | 3.6 |
R38 – T38 | 205 | 8-1/16 | 55 | 2-5/32 | 2.4 |
R38 – T45 | 215 | 8-15/32 | 63 | 2-15/32 | 3.3 |
R38 – T51 | 225 | 8-7/8 | 72 | 2-13/16 | 4,5 |
T38 – T45 | 215 | 8-15/32 | 63 | 2-15/32 | 3.3 |
T38 – T51 | 225 | 8-7/8 | 72 | 2-13/16 | 4,5 |
T45 – T51 | 240 | 9-7/16 | 72 | 2-13/16 | 4.6 |
ADAPTERY DO BITÓW | |||||
NITKA | DŁUGOŚĆ (L) | ŚREDNICA (D) | Waga | ||
(A)-(B) | mm | W. | mm | W. | Kg |
R25 – R28 | 185 | 7-9/32 | 44 | 1-23/32 | 0,9 |
R25 – R32 | 185 | 7-9/32 | 44 | 1-23/32 | 1.2 |
R28 – R25 | 185 | 7-9/32 | 44 | 1-23/32 | 1.3 |
R28 – R32 | 185 | 7-9/32 | 44 | 1-23/32 | 1,15 |
R32 – R25 | 210 | 8-1/4 | 44 | 1-23/32 | 1 |
R32 – T32 | 270 | 10-5/8 | 44 | 1-23/32 | 2 |
R32 – R38 | 270 | 10-5/8 | 44 | 1-23/32 | 2.3 |
R32 – T38 | 270 | 10-5/8 | 44 | 1-23/32 | 2.5 |
R32 – T45 | 360 | 14-3/16 | 44 | 1-23/32 | 3.9 |
R35 – R32 | 280 | 11-1/32 | 55 | 2-5/32 | 2.6 |
R38 – R32 | 280 | 11-1/32 | 55 | 2-5/32 | 2.5 |
R38 – T32 | 280 | 11-1/32 | 55 | 2-5/32 | 2.5 |
R38 – T38 | 280 | 11-1/32 | 55 | 2-5/32 | 2.5 |
R38 – T45 | 280 | 11-1/32 | 55 | 2-5/32 | 3.3 |
T38 - R32 | 280 | 11-1/32 | 55 | 2-5/32 | 2.5 |
T38 - R38 | 280 | 11-1/32 | 55 | 2-5/32 | 2.5 |
T38 - T45 | 280 | 11-1/32 | 55 | 2-5/32 | 3.3 |
T45 - R38 | 280 | 11-1/32 | 63 | 2-15/32 | 2.9 |
T45 - T38 | 280 | 11-1/32 | 63 | 2-15/32 | 2.8 |
T45 - T51 | 285 | 11-7/32 | 63 | 2-15/32 | 4.1 |
T45 – ST58 | 280 | 11-1/32 | 72 | 2-13/16 | 6 |
T51 - R38 | 285 | 11-7/32 | 72 | 2-13/16 | 3,85 |
T51 - T45 | 285 | 11-7/32 | 72 | 2-13/16 | 3,85 |
T51 – ST58 | 285 | 11-7/32 | 76 | 3 | 5.7 |
T51 – GT60 | 345 | 13-1/2 | 82 | 3-1/4 | 8,5 |
ST58 – T51 | 310 | 12-3/16 | 81 | 3-3/16 | 5.4 |
GT60 – T51 | 360 | 14-3/16 | 82 | 3-1/4 | 6,5 |
GT60 – ST58 | 345 | 13-1/2 | 82 | 3-1/4 | 6.7 |
ZŁĄCZA PROWADZĄCE | |||||
NITKA | DŁUGOŚĆ (L) | ŚREDNICA (D) | Waga | ||
mm | In | mm | In | Kg | |
T38 | 190 | 7-1/2 | 61 | 2-13/32 | 2.2 |