Fampidirana ny Shank Adapter - Ny fitaovana vaovao revolisionera amin'ny fandavahana!

Fampidirana ny Shank Adapter - Ny fitaovana vaovao revolisionera amin'ny fandavahana!

 

Ny Shank Adapter dia fitaovana vaovao mahery vaika izay manova ny tontolon'ny fandavahana.Ity fitaovana manavao ity dia natao hanampiana amin'ny famoronana dingana fandavahana mahomby kokoa sy mirindra, manome tombontsoa mahavariana ho an'ny mpandraharaha sy ny orinasa.

Ny Shank Adapter dia adaptatera novolavolaina manokana izay mampifandray ireo bitika fandavahana isan-karazany amin'ny fitaovana fandavahana, manampy amin'ny fanamafisana ny fahitsiana, ny hafainganam-pandeha ary ny fahombiazany.Miaraka amin'ny endrika tsy manam-paharoa, ny Shank Adapter dia azo ampiasaina amin'ny fampiharana fandavahana isan-karazany, ao anatin'izany ny fandavahana ho an'ny fitrandrahana harena an-kibon'ny tany, ny fanorenana, ny fikarohana ara-jeografika, sy ny maro hafa.

Ny iray amin'ireo tombony lehibe amin'ny Shank Adapter dia ny fahaizany.Ny adaptatera dia azo ampiasaina amin'ny karazana bitika isan-karazany, anisan'izany ny kofehy, taper, ary rotary hammer bits, ka mahatonga azy io ho safidy tsara ho an'ny fampiharana fandavahana.Midika izany fa mora kokoa sy mitahiry ho an'ny mpandraharaha sy ny orinasa izany.

Ny tombony iray hafa amin'ny Shank Adapter dia ny manampy amin'ny fampihenana ny fotoana tsy ampoizina mandritra ny asa fandavahana.Ny famolavolana matanjaka sy maharitra dia manome antoka fa mahatanty ny hamafin'ny fampiasana mavesatra izy ary tsy misy fahasimbana.

Ny famolavolan'ny Shank Adapter tsara indrindra sy ny fitaovana avo lenta ihany koa dia manome fahafahana azy hanome fahitsiana tsara mandritra ny fandavahana, izay tena ilaina amin'ny toe-javatra izay tena zava-dehibe ny fahitsiana.Mety hampitombo ny hafainganan'ny fandavahana ihany koa io fahitsiana io, ka mahatonga ny fotoana hahavitana haingana kokoa sy ny fihenan'ny vidin'ny asa.

Tsara homarihina ihany koa ny tombony ho an'ny tontolo iainana Shank Adapter, satria manamaivana ny filana fitaovana fandavahana marobe, mampihena ny fanjifana solika sy ny entona.Ny fahombiazana ambony omeny dia mety hitarika amin'ny fampihenana ny vidin'ny asa sy ny fampihenana ny fandaniana amin'ny fikojakojana.

Ho fehin-kevitra, ny Shank Adapter dia fitaovana vaovao sy lafo vidy izay afaka manome tombony lehibe ho an'ny orinasa mitady hanatsara ny asa fandavahana.Ny fahaiza-manaony, ny faharetany ary ny famolavolana mazava tsara dia mahatonga azy io ho safidy tsara indrindra ho an'ny fampiharana fandavahana isan-karazany, ary ny tombony azony amin'ny tontolo iainana dia mahatonga azy io ho safidy tsara ho an'ny orinasa mikasa ny hampihena ny dian-tongotra karbonany.Midira miaraka amin'ity fitaovana vaovao revolisionera ity anio ary zahao ny tombony ho anao!

EPIROC - BBC 43, 44, 45, 100
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R25 380 14.96 32 1.25
R32 380 14.96 32 1.25
EPIROC - BBC 51, 52, 54, 120
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 380 14 96 38 1 50
R38 390 15 35 38 1 50
T38 390 15.35 38 1.5
EPIROC - BBE 56U2, 57, 5701
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 537 21.14 44 1 73
T45 550 21.65 44 1.73
EPIROC - COP 1028
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R28 400 15.75 45 1.75
R32 400 15.75 45 1.75
EPIROC - COP 1036, 1038, 1238 (MALE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 485 19.09 38 1.5
R38 485 19.09 38 1.5
T38 485 19.09 38 1.5
R32 500 19.69 38 1.5
R38 500 19.69 38 1.5
T38 500 19.69 38 1.5
R32 575 22.64 38 1.5
T38 575 22.64 38 1.5
T45 500 19.69 45 1.75
R32 575 22.64 45 1.75
R38 575 22.64 45 1.75
T38 575 22.64 45 1.75
T45 575 22.64 45 1.75
EPIROC - COP 1036, 1038, 1238 (Vehivavy)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 710 27 95 52 2 05
R38 710 27.95 52 2.05
TI 30 710 27.95 52 2.05
EPIROC - COP 1132 (MALE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R28 410 16.14 35 1.38
R32 410 16.14 35 1.38
T35 410 16.14 35 1.38
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 500 19.69 35 1.38
T35 500 19.69 35 1.38
EPIROC - COP 1132 (Vehivavy)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 280 11.02 45 1.75
EPIROC - COP 1140, 1435
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 410 16.14 35 1.38
EPIROC - COP 1240, 1640
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 565 22.24 52 2.05
T35 565 22.24 52 2.05
T38 565 22.24 52 2.05
EPIROC - COP 1240, 1640, 1840, 1850, 2540 PLUS
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 565 22 24 52 2 05
XT45 * 565 22.24 52 2.05
T51 565 22 24 52 2 05
XT51 * 565 22.24 52 2.05
EPIROC - COP 1240 EX, 1640 EX
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 770 30 31 60 2 36
T38 770 30.31 60 2.36
EPIROC - COP 1240 EX, 1640 EX, 1840 EX, 1850 EX, 2150 EX, 2540 EX, 2550 EX
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In mm In
T45 770 30.31 60 2.36
T51 770 30.31 60 2.36
XT51 * 770 30.31 60 2.36
EPIROC - COP 1432, 1440, 1532, 1550, 1638, 1838, 2238
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 435 17.13 38 1.5
R38 435 17.13 38 1.5
T38 435 17.13 38 1.5
R32 525 20.67 38 1.5
R38 525 20.67 38 1.5
T35 525 20.67 38 1.5
T38 525 20.67 38 1.5
EPIROC - COP 1432, 1532 (Vehivavy)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 340 13 39 55 2 17
R38 340 13.39 55 2.17
EPIROC - COP 1440, 1550, 1838 (MALE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 525 20.67 52 2.05
T35 525 20.67 52 2.05
T38 525 20.67 52 2.05
T45 525 20.67 52 2.05
T51 525 20.67 52 2.05
EPIROC - COP 1440, 1550, 1838 (Vehivavy)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 640 25.2 52 2.05
R32 640 25.2 52 2.05
R38 650 25.59 52 2.05
EPIROC - COP 1838 MUX/HUX
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R35 730 28.74 52 2.05
T38 730 28.74 52 2.05
T45 730 28.74 52 2.05
XT45 * 730 28.74 52 2.05
T51 730 28.74 52 2.05
EPIROC - COP 2150 EX, 2550 EX
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T51 770 30.31 60 2.36
EPIROC - COP 2160, 2560
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 770 30.31 60 2.36
T45 770 30.31 60 2.36
T51 770 30.31 60 2.36
EPIROC - COP 2160 EX, 2560 EX
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 770 30.31 63 2.48
T51 770 30.31 63 2.48
XT51 * 770 30.31 63 2.48
GT60 770 30.31 63 2.48
EPIROC - COP 2560 EX PLUS
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 770 30 31 63 2 48
T51 770 30.31 63 2.48
XT51 * 770 30.31 63 2.48
EPIROC - COP 3038
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R38 435 17.13 45 1.75
T38 435 17.13 45 1.75
T45 450 17.72 45 1.75
R32 525 20.67 45 1.75
T38 525 20.67 45 1.75
EPIROC - COP 3060 ME
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T51 840 33 07 60 2 36
XT60 * 840 33.07 60 2.36
T-WiZ60 840 33.07 60 2.36
EPIROC - COP 3060 MEX
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T51 840 33.07 60 2.36
XT60 * 840 33.07 60 2.36
T-WiZ60 840 33.07 60 2.36
EPIROC - COP 4050 MUX
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
ST58 835 32 87 90 3 54
ST68 835 32.87 90 3.54

 

SANDVIK - HLX 1, RD 106
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R22 265 10.43 28 1.1
R25 265 10.43 28 1.1
SANDVIK - HL 300 (MALE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 400 15.75 32 1.25
SANDVIK - HL 300 S (Vehivavy)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 245 9.65 45 1.75
SANDVIK - RD 308, RD 314, RD 414, HLX 3 (F) (VEHIVAVY)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 205 8.07 45 1.75
SANDVIK - HLR 438 L, 438 T
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 380 14 96 38 1 50
R38 380 14.96 38 1.5
T38 380 14.96 38 1.5
SANDVIK - HLX 5, HLX 5 T, HFX 5 T (10 SPLINES)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 500 19.69 45 1.75
R38 500 19.69 45 1.75
T38 500 19.69 45 1.75
T45 500 19.69 45 1.75
R38 575 22.64 45 1.75
T38 600 23.62 45 1.75
T45 600 23.62 45 1.75
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 750 29.53 45 1.75
T38 750 29.53 45 1.75
T45 750 29.53 45 1.75
SANDVIK - HLX 5 PE-45 (8 SPLINE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 575 22.64 45 1.75
T35 575 22.64 45 1.75
T38 575 22.64 45 1.75
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 735 28.94 45 1.75
R38 735 28.94 45 1.75
T38 735 28.94 45 1.75
T45 735 28.94 45 1.75
SANDVIK - HL 500-38, 510-38
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 550 21 65 38 1 50
R38 550 21.65 38 1.5
T38 550 21.65 38 1.5
SANDVIK - HL 500-45, 510-45
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 550 21.65 45 1.75
T45 550 21.65 45 1.75
SANDVIK - HL 500 S-38, 510 S-38, 510 B, 510 LH
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 450 17.72 38 1.5
T35 450 17.72 38 1.5
R38 450 17.72 38 1.5
T38 450 17 72 38 1 50
R38 500 19.69 38 1.5
SANDVIK - HL 510 S-45, 550 SUPER M92, 560 SUPER
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 500 19.69 45 1.75
R38 500 19 69 45 1 75
T38 500 19.69 45 1.75
SANDVIK - RD 520, 525 (10 SPLINES)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R38 525 20.67 45 1.75
T38 525 20.67 45 1.75
R32 600 23.62 45 1.75
T38 600 23.62 45 1.75
R32 745 29.33 45 1.75
T38 745 29.33 45 1.75
SANDVIK - RD 520 PE 45, 525 PE-45 (8 SPLINES)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 600 23 62 45 1 75
T38 600 23.62 45 1.75
R32 745 29.33 45 1.75
T35 745 29.33 45 1.75
T38 745 29.33 45 1.75
SANDVIK - HL 600-45, 600 S-45
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 600 23.62 45 1.75
T45 600 23.62 45 1.75
SANDVIK - HL 600-52
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 650 25 59 52 2 05
T51 650 25.59 52 2.05
SANDVIK - HL 650-45, 700-45, 700 T-45, 710-45, 800 T-45, 810 T-45
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 600 23 62 45 1 75
T45 600 23.62 45 1.75
SANDVIK – HL 650-52, 700-52, 700 PE-52, 700 S-52, 710-52, 710 PE-52, 710 S-52,
SANDVIK – 710 SPE-52, 800 T-52, 800 PE-52, 810 T-52, HF 810 T-5210 SPE-52, 800 T-52, 800 PE-52, 810 T-52, HF 810 T- 52
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 600 23.62 52 2.05
T45 600 23 62 52 2 05
XT45 * 600 23 62 52 2 05
T51 600 23.62 52 2.05
XT51 * 600 23.62 52 2.05
SANDVIK - TAM 750
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
T45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
T45 446 17.56 44 1.73
SANDVIK - HL 844
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
R38 450 17 72 44 1 73
T38 450 17.72 44 1.73
T45 450 17.72 44 1.73
SANDVIK - HL 850 S (FLUSH SIDE)
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
T45 670 26 38 52 2 05
T51 670 26.38 52 2.05
SANDVIK - HL 1000-52, 1000 S 52, 1010-52, 1010 S-52
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
T45 590 23.23 52 2.05
T51 590 23 23 52 2 05
T45 670 26 38 52 2 05
T51 670 26.38 52 2.05
SANDVIK - HL 1000-60, 1010-60
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
ST58 670 26.38 60 2.36
GT60 670 26.38 60 2.36
SANDVIK - HL 1000 PE-65, 1010 PE-65, 1060 T/PE-65, 1500 T/PE-65, 1560 T/PE-65
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
T51 760 29.92 65 2.56
ST58 760 29.92 65 2.56
XT60 * 760 29.92 65 2.56
GT60 760 29.92 65 2.56
T-WiZ60 760 29.92 65 2.56
SANDVIK - HL 1000 T-80, 1010 T-80
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
GT60 760 29.92 80 3.15
SANDVIK - HL 1500-60, 1500 T 60
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
ST58 710 27.95 60 2.36
T51 760 29.92 60 2.36
GT60 760 29.92 60 2.36
SANDVIK - HL 1500-80, 1560 T-80, 1060 T-80, HF 1560
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
ST58 635 25 80 3.15
ST68 635 25 80 3.15
GT60 760 29.92 80 3.15
XT51 * 860 33.86 80 3.15
SANDVIK - HL 1500 T/PE-90, 1500 ST/PE-90, 1560 T/PE-90, 1560 ST/PE-90
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
GT60 760 29.92 90 3.54
SANDVIK - RD 1635CF-80
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
GT60 760 29.92 80 3.15

 

FURUKAWA - M 120, HD 200 (4 SPLINES)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
T45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
T45 446 17.56 44 1.73
FURUKAWA - PD 200
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
T45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
T45 446 17.56 44 1.73
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 484 19.06 44 1.73
T45 484 19.06 44 1.73
FURUKAWA - HD 260
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 537 21.14 44 1.73
T45 550 21.65 44 1.73
FURUKAWA - HD 300
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R38 655 25 79 45 1 75
T38 655 25.79 45 1.75
T45 655 25.79 45 1.75
FURUKAWA - HD 500
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 635 25 00 56 2 20
T45 635 25 56 2.2
T51 635 25 56 2.2
FURUKAWA - HD 609 (STD)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R38 620 24.41 45 1.75
T38 620 24.41 45 1.75
T45 620 24.41 45 1.75
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 690 27.17 45 1.75
T45 690 27.17 45 1.75
FURUKAWA - HD 612 (STD)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 670 26 38 51 2 00
T51 670 26.38 51 2
FURUKAWA - HD 612 (QED)
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
T45 845 33 27 51 2 00
T51 845 33.27 51 2
FURUKAWA - HD 615 (STD)
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
T51 700 27 56 58 2 28
T51 880 34.65 58 2.28
FURUKAWA - HD 709 (STD)
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
T38 620 24 41 45 1 75
T45 620 24.41 45 1.75
FURUKAWA - HD 709 (QED)
Halavany manontolo (L) DIAMETERE FRONT
tari-dresaka mm In. mm In.
T38 785 30 91 45 1 75
T45 785 30.91 45 1.75
T45 815 32.09 45 1.75
FURUKAWA - HD 712 (STD)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 590 23.23 51 2
T51 590 23.23 51 2
T45 790 31.1 51 2
T51 790 31.1 51 2
FURUKAWA - HD 712 (QED)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 885 34 84 51 2 00
T45 885 34.84 51 2
T51 885 34.84 51 2
FURUKAWA - HD 715 (STD)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T51 790 31 10 58 2 28
FURUKAWA - HD 715 (QED)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T51 885 34 84 58 2 28
FURUKAWA - HD 822, 826 (QED)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T51 885 34 84 51 2 00

 

MONTABERT - HC 20 (MALE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 287 11 30 45 1 75
T38 300 11.81 45 1.75
MONTABERT - HC 20 (Vehivavy)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 187 7.36 45 1.75
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
HEX 22 199 7.83 45 1.75
HEX 25 199 7.83 45 1.75
MONTABERT - HC 25 (MALE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 340 13.39 45 1.75
R38 350 13.78 45 1.75
T38 350 13.78 45 1.75
MONTABERT - HC 25 (Vehivavy)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R28 202 7.95 45 1.75
R32 202 7.95 45 1.75
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
HEX 25 218 8.58 45 1.75
MONTABERT - HC 28 (MALE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T35 385 15.16 45 1.75
MONTABERT - HC 258 (Vehivavy)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 272 10.71 45 1.75
MONTABERT - TA 35, LC 50 (R)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R25 380 14 96 32 1 25
R32 380 14.96 32 1.25
MONTABERT - H 40, 50, 60, 70 (LEYNER)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 380 14 96 38 1 50
R38 390 15 35 38 1 50
T38 390 15.35 38 1.5
MONTABERT - HC 40 (MALE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 372 14.65 32 1.25
MONTABERT - HC 40, 50 (LAHY)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 372 14.65 38 1.5
R38 380 14.96 38 1.5
T38 381 15 38 1.5
R32 440 17.32 38 1.5
R38 440 17.32 38 1.5
T38 447 17.6 38 1.5
MONTABERT - HC 40, 50 (Vehivavy)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 270 10.63 45 1.75
MONTABERT - HC 80, 90, 105, 108, 109, 120
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 440 17.32 38 1.5
R38 440 17.32 38 1.5
T38 440 17.32 38 1.5
R32 500 19.69 38 1.5
R38 500 19.69 38 1.5
T38 500 19.69 38 1.5
MONTABERT - HC 80, 108, 109, 120, 150
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 490 19 29 45 1 75
T45 490 19.29 45 1.75
T38 540 21.26 45 1.75
MONTABERT - HC 80 RP, 105 RP, 107 RP, 108 RP, 109 RP
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 670 26.38 45 1.75
T45 670 26 38 45 1 75
T45 771 30.35 45 1.75
MONTABERT - HC 95
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R38 438 17.24 45 1.75
T38 438 17.24 45 1.75
T45 453 17.83 45 1.75
R38 500 19.69 45 1.75
T38 500 19.69 45 1.75
MONTABERT - HC 95 R
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 503 19.8 45 1.75
R38 503 19.8 45 1.75
T38 503 19.8 45 1.75
T45 518 20.39 45 1.75
T45 518 20.39 51 2
T51 530 20.87 51 2
MONTABERT - H 100 (LAHY)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 537 21 14 44 1 73
T45 550 21.65 44 1.73
MONTABERT - HC 110 CA/CS
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R38 415 16.34 45 1.75
T38 415 16.34 45 1.75
T45 425 16.73 45 1.75
T38 530 20.87 45 1.75
MONTABERT - HC 110 MT
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R38 460 18 11 45 1 75
T38 460 18.11 45 1.75
MONTABERT - HC 112 LH
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T51 726 28 58 60 2 36
GT60 726 28.58 60 2.36
MONTABERT - HC 120 RP, 150 RP, 155 RP, 158 RP
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 670 26 38 51 2 00
T51 670 26.38 51 2
T45 771 30.35 51 2
T51 771 30.35 51 2
MONTABERT - HC 160, 170
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 757 29.8 60 2.36
T45 810 31.89 60 2.36
T51 810 31.89 60 2.36
XT60 * 810 31.89 60 2.36
GT60 810 31.89 60 2.36

 

INGERSOLL RAND - YH 60
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 537 21.14 44 1.73
T45 550 21.65 44 1.73
INGERSOLL RAND – YH 65, 70, 80
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 495 19 49 45 1 75
T45 495 19.49 45 1.75
INGERSOLL RAND - YH 65 RP, 70 RP, 80 RP (REVERSE PERCUSSIVE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In mm In
T38 700 27.56 45 1.75
T45 700 27.56 45 1.75
INGERSOLL RAND - YH 80 A
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 495 19 49 51 2 00
T51 495 19.49 51 2
INGERSOLL RAND - YD 90 M
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 330 12.99 38 1.5
R38 330 12.99 38 1.5
T38 330 12.99 38 1.5
INGERSOLL RAND – YH 95, 100
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 625 24 61 51 2 00
T51 625 24.61 51 2
INGERSOLL RAND - YH 95 RP, 100 RP (REVERSE PERCUSSIVE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 840 33.07 51 2
T51 840 33.07 51 2
INGERSOLL RAND – YH 110 V, 135
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 728 28 66 55 2 17
T51 728 28.66 55 2.17
T51 890 35.04 55 2.17
INGERSOLL RAND - EVL 130, VL 140 (12 SPLINE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 349 13 74 44 1 73
T45 349 13.74 44 1.73
T38 381 15 44 1.73
T45 381 15 44 1.73
INGERSOLL RAND – HYDRASTAR 200 (FLUSH VEHIVAVY)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In mm In
R32 351 13.82 45 1.75
INGERSOLL RAND - 350
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R25 380 14.96 32 1.25
R32 380 14.96 32 1.25
INGERSOLL RAND – URD 475 A, 550, VL 120, VL 140, F16
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
T45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
T45 446 17.56 44 1.73
GARNDER DENVER - HPR 1
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 620 24.41 45 1.75
T45 620 24.41 45 1.75
GARDNER DENVER - HPR 1 H
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R38 725 28.54 45 1.75
T38 725 28.54 45 1.75
T45 725 28.54 45 1.75
GARDNER DENVER - HPR 2 H
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 915 36 02 51 2 00
T51 915 36.02 51 2
GARDNER DENVER – 93
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R25 380 14 96 32 1 25
R32 380 14.96 32 1.25
GARDNER DENVER - PR 123 (4 SPLINE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
T45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
T45 446 17.56 44 1.73
GARDNER DENVER-REEDRILL-CATERPILLAR - HPR 4519
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T38 770 30 31 44 1 73
T45 770 30.31 44 1.73
GARDNER DENVER-REEDRILL-CATERPILLAR – HPR 5123
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 770 30.31 51 2
T51 770 30.31 51 2
GARDNER DENVER-REEDRILL-CATERPILLAR - HPR 5128
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T45 915 36.02 51 2
T51 915 36.02 51 2
GARDNER DENVER-REEDRILL-CATERPILLAR – HPR 6030
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
T51 1041 40 98 61 2 40
ST58 1041 40.98 61 2.4
XT60 * 1041 40 98 61 2 40
GT60 1041 40.98 61 2.4

 

SIG - HBM 100
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 380 14.96 38 1.5
R38 380 14.96 38 1.5
T38 380 14.96 38 1.5
BOART - HD 125, HE 125, HD 150, HE 150
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 495 19.49 45 1.75
R38 495 19 49 45 1 75
T38 495 19.49 45 1.75
BOART – SECAN 6 36 IR (4 SPLINE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
T45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
T45 446 17.56 44 1.73
DEMAG – RD 500
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
T45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
T45 446 17.56 44 1.73
SECOMA – HYDRASTAR 200 (FLUSH VEHIVAVY)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 351 13.82 45 1.75
SECOMA – HYDRASTAR 200, 300, 350, X2 (FLUSH SIDE MALE)
tari-dresaka Halavany manontolo (L) DIAMETERE FRONT
mm In. mm In.
R32 485 19 09 38 1 50
R38 485 19.09 38 1.5
T38 485 19 09 38 1 50
R32 500 19 69 38 1 50
R38 500 19.69 38 1.5
T38 500 19.69 38 1.5
Fotoana fandefasana: May-26-2023
WhatsApp Chat an-tserasera!