Sistemụ arịlịka nke onwe

Sistemụ arịlịka nke na-egwupụta onwe ya onyonyo
  • Sistemụ arịlịka nke onwe
  • Sistemụ arịlịka nke onwe
  • Sistemụ arịlịka nke onwe
  • Sistemụ arịlịka nke onwe
  • Sistemụ arịlịka nke onwe

Nkọwa dị mkpirikpi:

A na-eji anchoring eme ihe n'ọwara maka nkwado mbụ, mkpọda, n'ụsọ oké osimiri, nke m, ọrụ nchekwa mmiri, ntọala ụlọ, mgbakwasa okporo ụzọ na ọgwụgwọ arịa ala dị ka igbutu ala, mgbape, na afọ sink, ọ nweghị ike dochie ya na gburugburu ebe owuwu dị warara.Uru Uru Sistemu Arịlịka Oghere Oghere Onwe Onye: Nke nwere eriri eriri nwere oghere jikọtara ya na obere mkpọpu na-arụ ọrụ mkpọpu.Ogwe oghere na-enye ohere ikuku na mmiri na-agafe n'ofe mmanya ahụ mgbe a na-egwupụta ihe iji wepụ ...


Budata dị ka PDF

Nkọwa ngwaahịa

R25 Arịlịka Drilling Onwe

R32 Arịlịka Drilling Onwe

R38 Arịlịka Drilling onwe

R51 Arịlịka Drilling Onwe

T30 Arịlịka Drilling Onwe

T40 Arịlịka Drilling Onwe

T52 Arịlịka Drilling Onwe

T76 Arịlịka Drilling Onwe

Mkpado ngwaahịa

A na-eji anchoring eme ihe n'ọwara maka nkwado mbụ, mkpọda, n'ụsọ oké osimiri, nke m, ọrụ nchekwa mmiri, ntọala ụlọ, mgbakwasa okporo ụzọ na ọgwụgwọ arịa ala dị ka igbutu ala, mgbape, na afọ sink, ọ nweghị ike dochie ya na gburugburu ebe owuwu dị warara.

Uru

Sistemụ arịlịka mmanya na-egwupụta onwe ya:

Gụnyere eriri eriri nwere oghere jikọtara ya na obere ihe na-eme mkpọtụ.Ogwe oghere na-enye ohere ikuku na mmiri ka ọ na-agafe na mmanya ahụ n'oge a na-egwupụta ihe iji wepụ ihe mkpofu, mgbe a na-egwupụta ihe na omimi dị mkpa, grout na-ejupụta oghere oghere site na nrụgide maka ihe ha chọrọ ma na-ekpuchi bolt ahụ dum.

Coupler: Enwere ike iji onye na-emekọ ihe na-esonye na oghere oghere ma gbasaa ogologo nke bolt, ọ pụtara na arịlịka nwere ike ịgbatị ya na ndị na-ejikọta ya.

Efere na nut: A na-etinye efere na nut dị ka ihe ha chọrọ si dị.

Ngwunye egwu: A ga-ahọrọ ihe ọkụkụ na-ahọrọ ọnọdụ ala.

  • Nke gara aga:
  • Osote:

    • R25 Arịlịka Drilling Onwe

     

    Ogwe Arịlịka oghere
    Nha Mpụta Dia. Dia n'ime. Ibu kacha Ibu Mbupụta Ibu
    (mm) (mm) (kN) (kN) (Kg/m)
    R25-12 25 12 200 150 2.35

     

    Kwuonụ Bit
    Ụdị Mpụta Dia. Ibu Oke ngwa (Ndụmọdụ)
    (mm) (inch) (Kg)
    Nkedo obe bit 42 1.65 0.35 Nkedo cross bit maka aja na gravel
    51 2 0.38
    Igwe obe nchara 42 1.65 0.3 Obere obe siri ike maka ọnọdụ tọgbọrọ cha cha nke nwere obere okwute.
    51 2 0.4
    TC cross bit 42 1.65 0.35 TC cross bit maka dị nro na nke ọkara n'ụdị nkume
    51 2 0.45

     

    Njikọ
    Nha Mpụta Dia. Ogologo Ibu Rịba ama
    (mm) (mm) (Kg/pc)
    R25-S 36 150 0.66 Na usoro akara
    R25-E 36 150 0.66 Na-enweghị usoro mkpuchi

    Hex Nut
    Nha Nha igodo Ogologo Ibu Isi ike
    (mm) (mm) (Kg/pc) (HRC)
    R25-S 41 30 0.2 25-30

    Efere Domed
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    R25-E 150×150 8 30 1.4
    150×150 5 28 0.85
    200×200 8 32 3.2

    R32 Arịlịka Drilling Onwe

    Ogwe Arịlịka oghere
    Nha Mpụta Dia. Dia n'ime. Ibu kacha Ibu Mbupụta Ibu
    (mm) (mm) (kN) (kN) (Kg/m)
    S-R32/20 32 20 210 160 2.83
    S-R32/17 32 17 280 230 3.5
    S-R32/15 32 15 360 280 4
    E-R32/21 32 21 210 160 2.6
    E-R32/19 32 19 280 230 2.95
    E-R32/17 32 17 360 280 3.5
    E-R32/15 32 15 405 320 4
    C-R32/21 32 21 250 190 2.6
    C-R32/20 32 20 280 230 2.83
    C-R32/17.5 32 17.5 360 280 3.4

     

    Kwuonụ Bit
    Ụdị Mpụta Dia. Ibu Oke ngwa (Ndụmọdụ)
    (mm) (Kg)
    Nkedo obe bit 51 mm 0.99 Nkedo cross bit maka aja na gravel
    Igwe obe nchara 51 mm 0.88 Nchara siri ike maka ọnọdụ ala rụrụ arụ ma ọ bụ ọkara
    76 mm 2.87
    Steel 3 cutter bit 76 mm 2.65
    TC cross bit 51 mm 0.99 Ihe ntinye TC maka nhazi nkume dị nro na nke ọkara
    TC3 cutter bit 76 mm 2.87
    Steel arched bit 51 mm 0.99 Obere mgbako siri ike maka geometry kachasị mma maka ala anaghị agbakọba nke nwere obere okwute
    TC arched bit 51 mm 0.99 TC arched bit maka njikarịcha geometry maka nhazi nkume dị nro na nke ọkara
    Obere bọtịnụ ígwè 51 mm 1.32 Obere bọtịnụ siri ike maka okwute anaghị agbakọ ya na nnukwu nkume
    TC bọtịnụ bit 51 mm 1.43 Ihe ntinye bọtịnụ TC maka nhazi nkume ọkara
    EX bit 51 mm 0.88 Obere mkpụbelata obe siri ike, dabara maka ọtụtụ ngwa gụnyere eriri dị warara nke okwute dị nro.
    EXX bit(ọzọ) 51 mm 1.1 EXX bụ obere mkpọmkpọ ebe kacha sie ike dị, maka nkume siri ike, akwa akwa siri ike na ụkwụ siri ike.

     

    Njikọ
    Nha Mpụta Dia. Ogologo Ibu Rịba ama
    (mm) (mm) (Kg/pc)
    SSR32 42 145 0.79 Na usoro akara
    42 160 0.86
    42 190 1
    SER32 42 145 0.77 Na-enweghị usoro mkpuchi
    42 160 0.84
    42 190 1

     

    Hex Nut
    Nha Nha igodo Ogologo Ibu Isi ike
    (mm) (mm) (Kg/pc) (HRC)
    SSR32 46 45 0.37 25-30
    46 55 0.46
    46 60 0.47

     

    Efere Domed
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    R32-E 150×150 8 35 1.3
    150×150 5 35 0.85
    150×150 6 35 1
    150×150 10 35 1.7
    175×175 8 35 1.9
    200×200 8 35 2.6
    200×200 10 35 3.52
    200×200 12 35 2.94

     

    Efere arịlịka
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    E-R32 95×95 25 35 1.6
    120×120 30 35 3.2
    150×150 8 35 1.3
    200×200 10 35 3.06

    R38 Arịlịka Drilling onwe

    Ogwe Arịlịka oghere
    Nha Mpụta Dia. Dia n'ime. Ibu kacha Ibu Mbupụta Ibu
    (mm) (mm) (kN) (kN) (Kg/m)
    S-R38/20 38 20 500 400 5.5
    E-R38/22 38 22 500 400 4.95
    E-R38/18 38 18 550 430 6
    C-R38/22.5 38 22.5 500 400 4.8
    C-R38/21 38 21 500 400 5.25

     

    Kwuonụ Bit
    Ụdị Mpụta Dia. Ibu Oke ngwa (Ndụmọdụ)
    (mm) (Kg)
    Igwe obe nchara 76 mm 1.2 Obere obe siri ike maka ọnọdụ tọgbọrọ cha cha nke nwere obere okwute
    90 mm 1.4
    Steel arched bit 76 mm 1.2 Obere mgbako siri ike maka geometry kachasị mma maka ala anaghị agbakọba nke nwere obere okwute
    TC arched bit 115 mm 2.85 TC arched bit maka njikarịcha geometry maka nhazi nkume dị nro na nke ọkara
    TC cross bit 76 mm 1.25 TC cross bit maka dị nro na nke ọkara n'ụdị nkume
    90 mm 1.45
    TC3 cutter bit 76 mm 0.85 Ihe ntinye TC maka nhazi nkume dị nro na nke ọkara
    Obere bọtịnụ ígwè 76 mm 1 Obere bọtịnụ siri ike maka okwute anaghị agbakọ ya na nnukwu nkume
    TC bọtịnụ bit 76 mm 1 Ihe ntinye bọtịnụ TC maka nhazi nkume ọkara

     

    Njikọ
    Nha Mpụta Dia. Ogologo Ibu Rịba ama
    (mm) (mm) (Kg/pc)
    S-R38 51 180 1.33 Na usoro akara
    51 200 1.5
    51 220 1.67
    E-R38 51 180 1.38 Na-enweghị usoro mkpuchi
    51 200 1.55
    51 220 1.68

     

    Hex Nut
    Nha Nha igodo Ogologo Ibu Isi ike
    (mm) (mm) (Kg/pc) (HRC)
    S-R38 50 60 1.47 25-30

     

    Efere Domed
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    E-R38 150×150 8 41 3.6
    200×200 12 41 1.38

     

    Efere arịlịka
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    E-R38 140×140 35 41 5
    150×150 25 41 4.1
    200×200 12 41 3.67

    R51 Arịlịka Drilling Onwe

    Ogwe Arịlịka oghere
    Nha Mpụta Dia. Dia n'ime. Ibu kacha Ibu Mbupụta Ibu
    (mm) (mm) (kN) (kN) (Kg/m)
    S-R51/34 51 34 580 450 6.95
    S-R51/29 51 29 800 630 9
    E-R51/36 51 36 550 430 6.15
    E-R51/35 51 35 580 450 6.4
    E-R51/31 51 31 800 630 8.2
    C-R51/33 51 33 800 630 8

     

    Kwuonụ Bit
    Ụdị Mpụta Dia. Ibu Oke ngwa (Ndụmọdụ)
    (mm) (Kg)
    Igwe obe nchara 85 mm 1.3 Obere obe siri ike maka ọnọdụ tọgbọrọ cha cha nke nwere obere okwute
    TC cross bit 115 mm 1.8 TC cross bit maka dị nro na nke ọkara n'ụdị nkume
    Obere bọtịnụ ígwè 100 mm 1.85 Ihe ntinye bọtịnụ TC maka nkume anaghị agbakọ na nkume
    115 mm 2
    TC bọtịnụ bit 100 mm 1.85 Ihe ntinye bọtịnụ TC maka nhazi nkume ọkara

     

    Njikọ
    Nha Mpụta Dia. Ogologo Ibu Rịba ama
    (mm) (mm) (Kg/pc)
    S-R51 63 200 1.85 Na usoro akara
    63 220 2
    E-R51 63 200 1.84 Na-enweghị usoro mkpuchi
    63 220 2.13

     

    Hex Nut
    Nha Nha igodo Ogologo Ibu Isi ike
    (mm) (mm) (Kg/pc) (HRC)
    S-R51 75 70 1.53 25-30
    75 80 1.84

     

    Efere Domed
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    E-R38 200×200 15 55 4.7

     

    Efere arịlịka
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    E-R51 150×150 40 56 6.2
    180×180 45 56 10.5
    200×200 30 60 8.72
    250×250 40 60 18.9

    T30 Arịlịka Drilling Onwe

    Ogwe Arịlịka oghere
    Nha Mpụta Dia. Dia n'ime. Ibu kacha Ibu Mbupụta Ibu
    (mm) (mm) (kN) (kN) (Kg/m)
    S-T30/16 30 16 220 180 2.9
    S-T30/14 30 14 260 220 3.35
    S-T30/11 30 11 320 260 3.6
    E-T30/14 30 14 320 260 3.35

     

    Kwuonụ Bit
    Ụdị Mpụta Dia. Ibu Oke ngwa (Ndụmọdụ)
    (mm) (Kg)
    obe siri ike 42mm 0.30kg Obere obe siri ike maka ọnọdụ ala rụrụ arụ na nke ọkara
    46 mm 0.32 n'arọ
    51mm 0,40kg
    76 mm 0.56 n'arọ
    TC cross bit 42mm 0.30kg TC cross bit maka dị nro na nke ọkara n'ụdị nkume
    46 mm 0.32 n'arọ
    51mm 0,40kg
    Obere bọtịnụ siri ike 42mm 0.30kg Obere bọtịnụ siri ike maka okwute anaghị agbakọ ya na nnukwu nkume
    46 mm 0.32 n'arọ
    51mm 0,40kg
    TC bọtịnụ bit 46 mm 0,45kg TC bọtịnụ bit maka usoro nkume ọkara
    51mm 0.69 n'arọ

     

    Njikọ
    Nha Mpụta Dia. Ogologo Ibu Rịba ama
    (mm) (mm) (Kg/pc)
    S-T30 38 105 0.39 Na usoro akara
    E-T30 38 105 0.45 Na-enweghị usoro mkpuchi

     

    Hex Nut
    Nha Nha igodo Ogologo Ibu Isi ike
    (mm) (mm) (Kg/pc) (HRC)
    S-T30 46 35 0.31 25-30

     

    Spherical olu akwa aku
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    S-T30 46 35 0.33 290-340

     

    Efere arịlịka
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    S-T30 150×150 25 40 4.2
    200×200 8 36 2.43

    T40 Arịlịka Drilling Onwe

    Ogwe Arịlịka oghere
    Nha Mpụta Dia. Dia n'ime. Ibu kacha Ibu Mbupụta Ibu
    (mm) (mm) (kN) (kN) (Kg/m)
    S-T40/20 40 20 539 430 6.2
    S-T40/16 40 16 660 525 7.2
    E-T40/22 40 22 539 430 5.7
    E-T40/18 40 18 660 525 6.8

     

    Kwuonụ Bit
    Ụdị Mpụta Dia. Ibu Oke ngwa (Ndụmọdụ)
    (mm) (Kg)
    obe siri ike 76 mm 0.90kg Obere obe siri ike maka ọnọdụ ala rụrụ arụ na nke ọkara
    90mm 1.5kg
    100mm 1.65kg
    115mm 2.6kg
    TC cross bit 76 mm 1.2kg TC cross bit maka dị nro na nke ọkara n'ụdị nkume
    90mm 1.75kg
    100mm 2kg
    115mm 2.8kg
    130mm 3.1kg
    150mm 5kg
    obe siri ike 76 mm 1.15kg Obere bọtịnụ siri ike maka okwute anaghị agbakọ ya na nnukwu nkume
    90mm 1.68kg
    100mm 2.15kg
    115mm 2.3kg
    130mm 3.15kg
    TC bọtịnụ bit 76 mm 1.78kg TC bọtịnụ bit maka usoro nkume ọkara
    90mm 1.4kg
    100mm 2kg
    115mm 2.8kg
    130mm 4.92 n'arọ

     

    Njikọ
    Nha Mpụta Dia. Ogologo Ibu Rịba ama
    (mm) (mm) (Kg/pc)
    S-T40 54 140 1.09 Na usoro akara
    57 140 1.37
    E-T40 54 140 1.11 Na-enweghị usoro mkpuchi
    57 140 1.39

     

    Hex Nut
    Nha Nha igodo Ogologo Ibu Isi ike
    (mm) (mm) (Kg/pc) (HRC)
    S-T40 65 50 0.92 25-30

     

    Spherical olu akwa aku
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    S-T40 65 50 0.86 290-340

     

    Efere arịlịka
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    S-T40 115×115 20 56 1.6
    125×125 24 56 2.4
    200×200 12 56 3.28
    200×200 30 56 8.5

    T52 Arịlịka Drilling Onwe

    Ogwe Arịlịka oghere
    Nha Mpụta Dia. Dia n'ime. Ibu kacha Ibu Mbupụta Ibu
    (mm) (mm) (kN) (kN) (Kg/m)
    S-T52/24 52 24 929 730 10.2
    S-T52/26 52 26 929 730 9.7

    Njikọ
    Nha Mpụta Dia. Ogologo Ibu Rịba ama
    (mm) (mm) (Kg/pc)
    S-T52 70 160 2.31 Na usoro akara
    E-T52 70 160 2.46 Na-enweghị usoro mkpuchi

    Hex Nut
    Nha Nha igodo Ogologo Ibu Isi ike
    (mm) (mm) (Kg/pc) (HRC)
    S-T52 80 70 1.94 25-30

    Spherical olu akwa aku
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    S-T52 80 70 2.3 290-340

    Efere arịlịka
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    SST52 145×145 27 65 3.6
    200×200 30 65 8.59
    220×220 35 65 13.1

    T76 Arịlịka Drilling Onwe

    Ogwe Arịlịka oghere
    Nha Mpụta Dia. Dia n'ime. Ibu kacha Ibu Mbupụta Ibu
    (mm) (mm) (kN) (kN) (Kg/m)
    E-T76/51 76 51 1600 1200 16.5
    E-T76/45 76 45 1900 1500 19.7

    Njikọ
    Nha Mpụta Dia. Ogologo Ibu Rịba ama
    (mm) (mm) (Kg/pc)
    S-T76 95 200 4.26 Na usoro akara
    95 220 4.8

    Hex Nut
    Nha Nha igodo Ogologo Ibu Isi ike
    (mm) (mm) (Kg/pc) (HRC)
    S-T76 100 75 2.4 25-30
    100 80 2.67

    Spherical olu akwa aku
    Nha Nha igodo Ogologo Ibu
    (mm) (mm) (Kg/pc)
    E-T76 95 70 1.9

    Efere arịlịka
    Nha Akụkụ Ọkpụrụkpụ Oghere Dia. Ibu
    (mm) (mm) (mm) (Kg/pc)
    S-T76 250×250 60 80 27
    250×250 40 80 18

    Ngwaahịa ndị emetụtara

    Sistemụ igwe egwu egwu Rock Bolt

    Sistemụ igwe egwu egwu Rock Bolt

    Esemokwu stabilizer

    Esemokwu stabilizer

    Ring bit Tunnel Forepoling Casing Advance

    Ring bit Tunnel Forepoling Casing Advance

    Arịlịka Mgbasa Hydraulic

    Arịlịka Mgbasa Hydraulic

    Mkparịta ụka WhatsApp n'ịntanetị!