A’ toirt a-steach an Shank Adapter - An inneal ùr rèabhlaideach ann an drileadh!

A’ toirt a-steach an Shank Adapter - An inneal ùr rèabhlaideach ann an drileadh!

 

Tha an Shank Adapter na inneal ùr cumhachdach a tha ag atharrachadh saoghal drileadh.Tha an inneal ùr-ghnàthach seo air a dhealbhadh gus cuideachadh le bhith a’ cruthachadh pròiseas drileadh nas èifeachdaiche agus nas sìmplidhe, a’ toirt seachad raon de bhuannachdan drùidhteach dha gnìomhaichean agus gnìomhachasan le chèile.

Tha an Shank Adapter na inneal-atharrachaidh a chaidh a dhealbhadh gu sònraichte a tha a’ ceangal measgachadh de phìosan drile ri feannagan drileadh, a’ cuideachadh gus dèanamh cinnteach à cruinneas, astar agus coileanadh nas fheàrr.Leis an dealbhadh sònraichte aige, faodar an Shank Adapter a chleachdadh ann an raon de dhiofar thagraidhean drileadh, a’ toirt a-steach drileadh airson mèinnearachd, togail, sgrùdadh geo-teicnigeach, agus barrachd.

Is e aon de na prìomh bhuannachdan a tha aig an Shank Adapter cho sùbailteachd a tha e.Faodar an inneal-atharrachaidh a chleachdadh le diofar sheòrsaichean drile, a’ toirt a-steach snàithleach, taper, agus pìosan ùird rothlach, ga fhàgail na dheagh roghainn airson raon farsaing de thagraidhean drileadh.Tha seo a’ ciallachadh barrachd sùbailteachd agus sàbhalaidhean do ghnìomhaichean agus ghnìomhachasan.

Is e buannachd eile den Shank Adapter gu bheil e a’ cuideachadh le bhith a’ lughdachadh ùine downt rè obair drileadh.Tha an dealbhadh làidir agus seasmhach aige a’ dèanamh cinnteach gun urrainn dha seasamh ri cruas cleachdadh trom fhad ‘s a chumas e saor bho mhilleadh.

Tha dealbhadh mionaideachd an Shank Adapter agus stuthan àrd-inbhe cuideachd a’ toirt cothrom dha cruinneas nas fheàrr a thoirt seachad aig àm drileadh, rud a tha riatanach ann an suidheachaidhean far a bheil cruinneas deatamach.Faodaidh an cruinneas seo cuideachd astar drileadh àrdachadh, a’ leantainn gu amannan crìochnachaidh nas luaithe agus cosgaisean obrach nas ìsle.

Is fhiach toirt fa-near cuideachd buannachdan àrainneachdail an Shank Adapter, leis gu bheil e a’ lughdachadh an fheum air ioma feannagan drile, a’ lughdachadh caitheamh connaidh agus sgaoilidhean.Faodaidh an èifeachdas nas àirde a bheir e seachad cuideachd cosgaisean obrach nas ìsle agus cosgaisean cumail suas nas ìsle.

Gu crìch, tha an Shank Adapter na inneal ùr-ghnàthach agus cosg-èifeachdach a bheir buannachdan mòra do ghnìomhachasan a tha airson an obair drileadh a sgioblachadh.Tha a sùbailteachd, seasmhachd agus dealbhadh mionaideach ga dhèanamh na dheagh roghainn airson raon farsaing de thagraidhean drileadh, agus tha na buannachdan àrainneachdail ga fhàgail mar an roghainn cheart dha gnìomhachasan a tha airson an lorg carboin aca a lughdachadh.Faigh air bòrd leis an inneal ùr rèabhlaideach seo an-diugh agus faigh eòlas air na buannachdan dhut fhèin!

EPIROC - BBC 43, 44, 45, 100
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R25 380 14.96 32 1.25
R32 380 14.96 32 1.25
EPIROC - BBC 51, 52, 54, 120
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 380 14 96 38 1 50
R38 390 15 35 38 1 50
T38 390 15.35 38 1.5
EPIROC - BBE 56U2, 57, 5701
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 537 21.14 44 1 73
Tha 45 550 21.65 44 1.73
EPIROC - COP 1028
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R28 400 15.75 45 1.75
R32 400 15.75 45 1.75
EPIROC - COP 1036, 1038, 1238 (MALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 485 19.09 38 1.5
R38 485 19.09 38 1.5
T38 485 19.09 38 1.5
R32 500 19.69 38 1.5
R38 500 19.69 38 1.5
T38 500 19.69 38 1.5
R32 575 22.64 38 1.5
T38 575 22.64 38 1.5
Tha 45 500 19.69 45 1.75
R32 575 22.64 45 1.75
R38 575 22.64 45 1.75
T38 575 22.64 45 1.75
Tha 45 575 22.64 45 1.75
EPIROC - COP 1036, 1038, 1238 (FEMALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 710 27 95 52 2 05
R38 710 27.95 52 2.05
TI 30 710 27.95 52 2.05
EPIROC - COP 1132 (MALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R28 410 16.14 35 1.38
R32 410 16.14 35 1.38
T35 410 16.14 35 1.38
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 500 19.69 35 1.38
T35 500 19.69 35 1.38
EPIROC - COP 1132 (FEMALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 280 11.02 45 1.75
EPIROC - COP 1140, 1435
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 410 16.14 35 1.38
EPIROC - COP 1240, 1640
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 565 22.24 52 2.05
T35 565 22.24 52 2.05
T38 565 22.24 52 2.05
EPIROC - COP 1240, 1640, 1840, 1850, 2540 PLUS
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 565 22 24 52 2 05
XT45 * 565 22.24 52 2.05
T51 565 22 24 52 2 05
XT51 * 565 22.24 52 2.05
EPIROC - COP 1240 EX, 1640 EX
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 770 30 31 60 2 36
T38 770 30.31 60 2.36
EPIROC - COP 1240 EX, 1640 EX, 1840 EX, 1850 EX, 2150 EX, 2540 EX, 2550 EX
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm In mm In
Tha 45 770 30.31 60 2.36
T51 770 30.31 60 2.36
XT51 * 770 30.31 60 2.36
EPIROC - COP 1432, 1440, 1532, 1550, 1638, 1838, 2238
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 435 17.13 38 1.5
R38 435 17.13 38 1.5
T38 435 17.13 38 1.5
R32 525 20.67 38 1.5
R38 525 20.67 38 1.5
T35 525 20.67 38 1.5
T38 525 20.67 38 1.5
EPIROC - COP 1432, 1532 (FEMALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 340 13 39 55 2 17
R38 340 13.39 55 2.17
EPIROC - COP 1440, 1550, 1838 (MALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 525 20.67 52 2.05
T35 525 20.67 52 2.05
T38 525 20.67 52 2.05
Tha 45 525 20.67 52 2.05
T51 525 20.67 52 2.05
EPIROC - COP 1440, 1550, 1838 (FEMALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 640 25.2 52 2.05
R32 640 25.2 52 2.05
R38 650 25.59 52 2.05
EPIROC - COP 1838 MUX/HUX
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R35 730 28.74 52 2.05
T38 730 28.74 52 2.05
Tha 45 730 28.74 52 2.05
XT45 * 730 28.74 52 2.05
T51 730 28.74 52 2.05
EPIROC - COP 2150 EX, 2550 EX
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T51 770 30.31 60 2.36
EPIROC - COP 2160, 2560
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 770 30.31 60 2.36
Tha 45 770 30.31 60 2.36
T51 770 30.31 60 2.36
EPIROC - COP 2160 EX, 2560 EX
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 770 30.31 63 2.48
T51 770 30.31 63 2.48
XT51 * 770 30.31 63 2.48
GT60 770 30.31 63 2.48
EPIROC - COP 2560 EX PLUS
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 770 30 31 63 2 48
T51 770 30.31 63 2.48
XT51 * 770 30.31 63 2.48
EPIROC - COP 3038
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R38 435 17.13 45 1.75
T38 435 17.13 45 1.75
Tha 45 450 17.72 45 1.75
R32 525 20.67 45 1.75
T38 525 20.67 45 1.75
EPIROC - COP 3060 ME
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T51 840 33 07 60 2 36
XT60 * 840 33.07 60 2.36
T-WiZ60 840 33.07 60 2.36
EPIROC - COP 3060 MEX
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T51 840 33.07 60 2.36
XT60 * 840 33.07 60 2.36
T-WiZ60 840 33.07 60 2.36
EPIROC - COP 4050 MUX
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
ST58 835 32 87 90 3 54
ST68 835 32.87 90 3.54

 

SANDVIK - HLX 1, RD 106
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R22 265 10.43 28 1.1
R25 265 10.43 28 1.1
SANDVIK - HL 300 (MALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 400 15.75 32 1.25
SANDVIK - HL 300 S (FEMALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 245 9.65 45 1.75
SANDVIK - RD 308, RD 314, RD 414, HLX 3 (F) (FEMALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 205 8.07 45 1.75
SANDVIK - HLR 438 L, 438 T
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 380 14 96 38 1 50
R38 380 14.96 38 1.5
T38 380 14.96 38 1.5
SANDVIK - HLX 5, HLX 5 T, HFX 5 T (10 SPLINES)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 500 19.69 45 1.75
R38 500 19.69 45 1.75
T38 500 19.69 45 1.75
Tha 45 500 19.69 45 1.75
R38 575 22.64 45 1.75
T38 600 23.62 45 1.75
Tha 45 600 23.62 45 1.75
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 750 29.53 45 1.75
T38 750 29.53 45 1.75
Tha 45 750 29.53 45 1.75
SANDVIK - HLX 5 PE-45 (8 SPLINES)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 575 22.64 45 1.75
T35 575 22.64 45 1.75
T38 575 22.64 45 1.75
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 735 28.94 45 1.75
R38 735 28.94 45 1.75
T38 735 28.94 45 1.75
Tha 45 735 28.94 45 1.75
SANDVIK - HL 500-38, 510-38
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 550 21 65 38 1 50
R38 550 21.65 38 1.5
T38 550 21.65 38 1.5
SANDVIK - HL 500-45, 510-45
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 550 21.65 45 1.75
Tha 45 550 21.65 45 1.75
SANDVIK - HL 500 S-38, 510 S-38, 510 B, 510 LH
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 450 17.72 38 1.5
T35 450 17.72 38 1.5
R38 450 17.72 38 1.5
T38 450 17 72 38 1 50
R38 500 19.69 38 1.5
SANDVIK - HL 510 S-45, 550 SUPER M92, 560 SUPER
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 500 19.69 45 1.75
R38 500 19 69 45 1 75
T38 500 19.69 45 1.75
SANDVIK - RD 520, 525 (10 SPLINES)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R38 525 20.67 45 1.75
T38 525 20.67 45 1.75
R32 600 23.62 45 1.75
T38 600 23.62 45 1.75
R32 745 29.33 45 1.75
T38 745 29.33 45 1.75
SANDVIK - RD 520 PE 45, 525 PE-45 (8 SPLINES)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 600 23 62 45 1 75
T38 600 23.62 45 1.75
R32 745 29.33 45 1.75
T35 745 29.33 45 1.75
T38 745 29.33 45 1.75
SANDVIK - HL 600-45, 600 S-45
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 600 23.62 45 1.75
Tha 45 600 23.62 45 1.75
SANDVIK - HL 600-52
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 650 25 59 52 2 05
T51 650 25.59 52 2.05
SANDVIK - HL 650-45, 700-45, 700 T-45, 710-45, 800 T-45, 810 T-45
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 600 23 62 45 1 75
Tha 45 600 23.62 45 1.75
SANDVIK - HL 650-52, 700-52, 700 PE-52, 700 S-52, 710-52, 710 PE-52, 710 S-52,
SANDVIK - 710 SPE-52, 800 T-52, 800 PE-52, 810 T-52, HF 810 T-5210 SPE-52, 800 T-52, 800 PE-52, 810 T-52, HF 810 T- 52
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 600 23.62 52 2.05
Tha 45 600 23 62 52 2 05
XT45 * 600 23 62 52 2 05
T51 600 23.62 52 2.05
XT51 * 600 23.62 52 2.05
SANDVIK - TAM 750
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
Tha 45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
Tha 45 446 17.56 44 1.73
SANDVIK - HL 844
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
R38 450 17 72 44 1 73
T38 450 17.72 44 1.73
Tha 45 450 17.72 44 1.73
SANDVIK - HL 850 S (FLUSH SIDE)
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
Tha 45 670 26 38 52 2 05
T51 670 26.38 52 2.05
SANDVIK - HL 1000-52, 1000 S 52, 1010-52, 1010 S-52
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
Tha 45 590 23.23 52 2.05
T51 590 23 23 52 2 05
Tha 45 670 26 38 52 2 05
T51 670 26.38 52 2.05
SANDVIK - HL 1000-60, 1010-60
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
ST58 670 26.38 60 2.36
GT60 670 26.38 60 2.36
SANDVIK - HL 1000 PE-65, 1010 PE-65, 1060 T / PE-65, 1500 T / PE-65, 1560 T / PE-65
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
T51 760 29.92 65 2.56
ST58 760 29.92 65 2.56
XT60 * 760 29.92 65 2.56
GT60 760 29.92 65 2.56
T-WiZ60 760 29.92 65 2.56
SANDVIK - HL 1000 T-80, 1010 T-80
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
GT60 760 29.92 80 3.15
SANDVIK - HL 1500-60, 1500 T 60
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
ST58 710 27.95 60 2.36
T51 760 29.92 60 2.36
GT60 760 29.92 60 2.36
SANDVIK - HL 1500-80, 1560 T-80, 1060 T-80, HF 1560
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
ST58 635 25 80 3.15
ST68 635 25 80 3.15
GT60 760 29.92 80 3.15
XT51 * 860 33.86 80 3.15
SANDVIK - HL 1500 T / PE-90, 1500 ST / PE-90, 1560 T / PE-90, 1560 ST / PE-90
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
GT60 760 29.92 90 3.54
SANDVIK - RD 1635CF-80
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
GT60 760 29.92 80 3.15

 

FURUKAWA - M 120, HD 200 (4 SPLINES)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
Tha 45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
Tha 45 446 17.56 44 1.73
FURUKAWA - PD 200
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
Tha 45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
Tha 45 446 17.56 44 1.73
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 484 19.06 44 1.73
Tha 45 484 19.06 44 1.73
FURUKAWA - HD 260
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 537 21.14 44 1.73
Tha 45 550 21.65 44 1.73
FURUKAWA - HD 300
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R38 655 25 79 45 1 75
T38 655 25.79 45 1.75
Tha 45 655 25.79 45 1.75
FURUKAWA - HD 500
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 635 25 00 56 2 20
Tha 45 635 25 56 2.2
T51 635 25 56 2.2
FURUKAWA - HD 609 (STD)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R38 620 24.41 45 1.75
T38 620 24.41 45 1.75
Tha 45 620 24.41 45 1.75
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 690 27.17 45 1.75
Tha 45 690 27.17 45 1.75
FURUKAWA - HD 612 (STD)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 670 26 38 51 2 00
T51 670 26.38 51 2
FURUKAWA - HD 612 (QED)
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
Tha 45 845 33 27 51 2 00
T51 845 33.27 51 2
FURUKAWA - HD 615 (STD)
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
T51 700 27 56 58 2 28
T51 880 34.65 58 2.28
FURUKAWA - HD 709 (STD)
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
T38 620 24 41 45 1 75
Tha 45 620 24.41 45 1.75
FURUKAWA - HD 709 (QED)
Faid iomlan (L) FRONT END DIAMETER
TRÀTH mm Anns. mm Anns.
T38 785 30 91 45 1 75
Tha 45 785 30.91 45 1.75
Tha 45 815 32.09 45 1.75
FURUKAWA - HD 712 (STD)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 590 23.23 51 2
T51 590 23.23 51 2
Tha 45 790 31.1 51 2
T51 790 31.1 51 2
FURUKAWA - HD 712 (QED)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 885 34 84 51 2 00
Tha 45 885 34.84 51 2
T51 885 34.84 51 2
FURUKAWA - HD 715 (STD)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T51 790 31 10 58 2 28
FURUKAWA - HD 715 (QED)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T51 885 34 84 58 2 28
FURUKAWA - HD 822, 826 (QED)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T51 885 34 84 51 2 00

 

MONTABERT - HC 20 (MALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 287 11 30 45 1 75
T38 300 11.81 45 1.75
MONTABERT - HC 20 (FEMALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 187 7.36 45 1.75
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
HEX 22 199 7.83 45 1.75
HEX 25 199 7.83 45 1.75
MONTABERT - HC 25 (MALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 340 13.39 45 1.75
R38 350 13.78 45 1.75
T38 350 13.78 45 1.75
MONTABERT - HC 25 (FEMALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R28 202 7.95 45 1.75
R32 202 7.95 45 1.75
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
HEX 25 218 8.58 45 1.75
MONTABERT - HC 28 (MALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T35 385 15.16 45 1.75
MONTABERT - HC 258 (FEMALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 272 10.71 45 1.75
MONTABERT - TA 35, LC 50 (R)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R25 380 14 96 32 1 25
R32 380 14.96 32 1.25
MONTABERT - H 40, 50, 60, 70 (LEYNER)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 380 14 96 38 1 50
R38 390 15 35 38 1 50
T38 390 15.35 38 1.5
MONTABERT - HC 40 (MALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 372 14.65 32 1.25
MONTABERT - HC 40, 50 (MALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 372 14.65 38 1.5
R38 380 14.96 38 1.5
T38 381 15 38 1.5
R32 440 17.32 38 1.5
R38 440 17.32 38 1.5
T38 447 17.6 38 1.5
MONTABERT - HC 40, 50 (FEMALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 270 10.63 45 1.75
MONTABERT - HC 80, 90, 105, 108, 109, 120
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 440 17.32 38 1.5
R38 440 17.32 38 1.5
T38 440 17.32 38 1.5
R32 500 19.69 38 1.5
R38 500 19.69 38 1.5
T38 500 19.69 38 1.5
MONTABERT - HC 80, 108, 109, 120, 150
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 490 19 29 45 1 75
Tha 45 490 19.29 45 1.75
T38 540 21.26 45 1.75
MONTABERT - HC 80 RP, 105 RP, 107 RP, 108 RP, 109 RP
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 670 26.38 45 1.75
Tha 45 670 26 38 45 1 75
Tha 45 771 30.35 45 1.75
MONTABERT - HC 95
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R38 438 17.24 45 1.75
T38 438 17.24 45 1.75
Tha 45 453 17.83 45 1.75
R38 500 19.69 45 1.75
T38 500 19.69 45 1.75
MONTABERT - HC 95 R
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 503 19.8 45 1.75
R38 503 19.8 45 1.75
T38 503 19.8 45 1.75
Tha 45 518 20.39 45 1.75
Tha 45 518 20.39 51 2
T51 530 20.87 51 2
MONTABERT - H 100 (MALE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 537 21 14 44 1 73
Tha 45 550 21.65 44 1.73
MONTABERT - HC 110 CA/CS
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R38 415 16.34 45 1.75
T38 415 16.34 45 1.75
Tha 45 425 16.73 45 1.75
T38 530 20.87 45 1.75
MONTABERT - HC 110 MT
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R38 460 18 11 45 1 75
T38 460 18.11 45 1.75
MONTABERT - HC 112 LH
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T51 726 28 58 60 2 36
GT60 726 28.58 60 2.36
MONTABERT - HC 120 RP, 150 RP, 155 RP, 158 RP
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 670 26 38 51 2 00
T51 670 26.38 51 2
Tha 45 771 30.35 51 2
T51 771 30.35 51 2
MONTABERT - HC 160, 170
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 757 29.8 60 2.36
Tha 45 810 31.89 60 2.36
T51 810 31.89 60 2.36
XT60 * 810 31.89 60 2.36
GT60 810 31.89 60 2.36

 

RAND INGERSOLL - YH 60
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 537 21.14 44 1.73
Tha 45 550 21.65 44 1.73
RAND INGERSOLL - YH 65, 70, 80
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 495 19 49 45 1 75
Tha 45 495 19.49 45 1.75
RAND INGERSOLL - YH 65 RP, 70 RP, 80 RP (REVERSE PERCUSSIVE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm In mm In
T38 700 27.56 45 1.75
Tha 45 700 27.56 45 1.75
RAND INGERSOLL - YH 80 A
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 495 19 49 51 2 00
T51 495 19.49 51 2
RAND INGERSOLL - YD 90 M
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 330 12.99 38 1.5
R38 330 12.99 38 1.5
T38 330 12.99 38 1.5
RAND INGERSOLL - YH 95, 100
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 625 24 61 51 2 00
T51 625 24.61 51 2
RAND INGERSOLL - YH 95 RP, 100 RP (REVERSE PERCUSSIVE)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 840 33.07 51 2
T51 840 33.07 51 2
RAND INGERSOLL - YH 110 V, 135
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 728 28 66 55 2 17
T51 728 28.66 55 2.17
T51 890 35.04 55 2.17
RAND INGERSOLL - EVL 130, VL 140 (12 SPLINES)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 349 13 74 44 1 73
Tha 45 349 13.74 44 1.73
T38 381 15 44 1.73
Tha 45 381 15 44 1.73
INGERSOLL RAND - HYDRASTAR 200 (FEMALE-SIDE FLUSH)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm In mm In
R32 351 13.82 45 1.75
RAND INGERSOLL - 350
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R25 380 14.96 32 1.25
R32 380 14.96 32 1.25
RAND INGERSOLL - URD 475 A, 550, VL 120, VL 140, F16
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
Tha 45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
Tha 45 446 17.56 44 1.73
GARNDER DENVER - HPR 1
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 620 24.41 45 1.75
Tha 45 620 24.41 45 1.75
GARDNER DENVER - HPR 1 H
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R38 725 28.54 45 1.75
T38 725 28.54 45 1.75
Tha 45 725 28.54 45 1.75
GARDNER DENVER - HPR 2 H
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 915 36 02 51 2 00
T51 915 36.02 51 2
GARDNER DENVER - 93
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R25 380 14 96 32 1 25
R32 380 14.96 32 1.25
GARDNER DENVER – PR 123 (4 splines)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
Tha 45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
Tha 45 446 17.56 44 1.73
GARDNER DENVER-REEDRILL-CATERPILLAR - HPR 4519
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T38 770 30 31 44 1 73
Tha 45 770 30.31 44 1.73
GARDNER DENVER-REEDRILL-CATERPILLAR - HPR 5123
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 770 30.31 51 2
T51 770 30.31 51 2
GARDNER DENVER-REEDRILL-CATERPILLAR - HPR 5128
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
Tha 45 915 36.02 51 2
T51 915 36.02 51 2
GARDNER DENVER-REEDRILL-CATERPILLAR - HPR 6030
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
T51 1041 40 98 61 2 40
ST58 1041 40.98 61 2.4
XT60 * 1041 40 98 61 2 40
GT60 1041 40.98 61 2.4

 

SIG - HBM 100
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 380 14.96 38 1.5
R38 380 14.96 38 1.5
T38 380 14.96 38 1.5
BOART - HD 125, HE 125, HD 150, HE 150
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 495 19.49 45 1.75
R38 495 19 49 45 1 75
T38 495 19.49 45 1.75
BOART – SECAN 6 36 IR (4 splines)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
Tha 45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
Tha 45 446 17.56 44 1.73
DEMAG – RD 500
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 380 14.96 44 1.73
R38 380 14.96 44 1.73
T38 380 14.96 44 1.73
Tha 45 380 14.96 44 1.73
R32 446 17.56 44 1.73
R38 446 17.56 44 1.73
T38 446 17.56 44 1.73
Tha 45 446 17.56 44 1.73
SECOMA - HYDRASTAR 200 (FEMALE-SIDE FLUSH)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 351 13.82 45 1.75
SECOMA - HYDRASTAR 200, 300, 350, X2 (MALE-SIDE FLUSH)
TRÀTH Faid iomlan (L) FRONT END DIAMETER
mm Anns. mm Anns.
R32 485 19 09 38 1 50
R38 485 19.09 38 1.5
T38 485 19 09 38 1 50
R32 500 19 69 38 1 50
R38 500 19.69 38 1.5
T38 500 19.69 38 1.5
Ùine puist: Cèitean-26-2023
Còmhradh WhatsApp air-loidhne!